JQuery :: Dynamically Setting Tab Index And .focus()?
May 10, 2009
I'm opening a dialog box using the jQuery UI dialog methods, this box will display a form, and I would like to autofocus the first element. I'm also modifying tabindex of the different form fields of this new form in order to make them a lot higher than those of the original page, and thus navigate through the form using only the tab key. The issue is that I can correctly change tabindex values, and correctly focus the first element but pressing tab will not focus the next element in my newly added form but seems to act as I was focusing the first "tabindexable" element of my original page. I also note that manually focusing (ie. clicking) the element cause no problem, new tab index order is respected. Does anyone have a clue where it can came from ? Something seems to be messed up in the tabindex order. Tested on FF3, maybe the browser only update tabindex order on "manual" focus and not when modifying attributes ?
In this code snip I want to be able to click an item i list-handbag and I then get the index li and with that index I want to animate the same index value in slideshow. How do I set that? Ex.:slideshow[index[list-handbag]].animate (.....what syntax can I use to do something on the slideshow img's?
Does any body know how to use the index value of a tab and pass it to other functions across the app.. this works as long as it is in focus of the function
I need to set tabs on java generated pages. Pages have four sections: header, sidebar, body, and footer. The sidebar and body change dynamically. The tab key must go to anchors, fields, and buttons doing all in the header first, all in the sidebar second, etc. A base page contains includes for all the pieces and has the body tag. Code:
http:[url]....When Someone click on two button sin center it loads the side pages.I want to add more pages. I know very little about JavaScript. But I learn this one and able to add more pages. But when clicking on other pages it will take ne page but under already excisting page.I want to add functionality so that when for example click on a link, one page slide to the left. Then I will click another page slide on th left.So here it either slides down above of the page or first that previous page slides back.
I am working in a third party application which has a hookinto their window.onload() function.(it calls my fnCustomOnload. In my fnCustomOnload() function I have tried to bind a focusout event on a particular input and have it call a function callled fnGetRestriction(). The function fnGetRestriction()actually works without errors, I have forced it with the grabfocus.focus (lines 2 and 3)but it is called not being called anytime other than once at the beginning when it is force by lines 2 and 3.. The line that performs the alert() (line 4)works properly all the time. What is wrong with line 5?
I have 3 combolist fields ( A, B and C ) each of which has just "No" and "Confirmed" as their only options.I have one final combolist ( D ) which has just "Yes" and "No" as options. "No" is the default selected item and Index0 in the list.The user must select "Confirm" all three ( A, B and C ) lists before they should be allowed to select "Yes" in the final list ( D ).I want to be able to have the system to automatically select and display "No" in list ( D ) if any of the first 3 selections ( A, B or C ) are "No".
I don't have a problem validating if any of the 3 lists ( A, B or C ) are "No" but I cannot get the final combolist to change from "Yes" ( if previously selected ) to "No".I have tried setting the selected index of (D) to 0 and tried setting the selected value of (D) to "No" but if (D) currently displays "Yes" when any of the ( A, B or C ) are changed to "No" nothing happens to (D).Am I trying to do something that cannot be done ?
I've got this hidden div that pops up using jQuery when the login menu item is clicked. <div class="entry-wrapper" id="reg-login" style="display:none;"> <div class="t"></div> <div id="loginFormHolder" class="c"> <div class="close"> <a href="index.php" class="spotlight-close"> </a> </div> <!-- close --> <div class="login"> <div> <!-- blank --> ..... What I'm trying to do is setting the input focus on the user_session_username text input and the code is not working. The div pops up but the focus is never put into the user_session_username edit field.
I know this isn't related to generic javascript but I didn't found a group dedicated to the FCKEditor. I'm sorry for the inconvenience.
I'm desperately trying to set the focus into a FCKEditor component (client side). I know that the FCK object exposes a "Focus()" method (the capital F isn't a spelling mistake). The problem is I don't know how to bind to this object from my container page (aspx). How can you reference this object?
I wrote code for a scramble word game and I am trying to set focus everytimge I click on check button..I've got it so it will set focus when I start game, but whenever I put put setFocus() on the onclick of the button it will not work.is there any way the I can have two procedures for onclick.like <input id="inbox" type="text" /><input type="button" value="check" onclick="guess()" "setFocus()"/>I also want to selectall if the word is incorrect not sure how to go about doing this..I did research on this problem, but they all give me examples on applying just one thing to the onclick not two..
There is a tab control on a page with multiple tabs and handful of controls in each tab. The way it's rendered in html (like grid etc..) is in table format in tablerows and cells.
On clientside, on form validation in javascript, I would like to set focus on to one of the tabs and set the focus to the control on that tab.
I find this (tab) control by looking through all 'td' s and by it's id. Now that I have "td" control, I would like to set the focus on to this.
Here is what I do. (FindHtmlControlByID method returns the control based on type and id)
textBox.focus() fails with the message it's either not visible or not enabled or it is a type of control that cannot be focused. If the tab already had focus, then this works ok.
I would like to know how to set the focus on a radio button (if it is possible) I tried button[0].focus() but with no luck
The reason that I need to do this is to validate a form. If the user does not select a radio button I would like my validation code to set the focus at the first radio button within the pair that was not selected that way he/she does not have to look for it.
There are many ways for setting focus on form fields. I'm actually looking for some code that automatically detects if there is any form on the page & then automatically sets the focus to the first field of the form.
No need of putting Form Name & Field Name in Javascript. Is there any way to do this ???
I have a table with onw row and one column.I have set class for column also written function for click event for class.Now added table row dynamically and set same class.But click event works only for existing row not for newly added row.
I have a page with 3 divisions overlaying each other. I dynamically change the visibility to switch between them. On the Mac version of IE 5.1 I am not able to activate the scroll bars after making a division visible. Only the originally displayed division works. I am able to click on the data (option select lists) in all of the divisions. There is no problem when I use Netscape.
I would like to dynamically change the z-index to see if that would help. Can someone tell me how?
I am trying to throw in some client-side validation to my php web form. My problem is that only one field is actually getting validated. Here is the code:
Form: onSubmit="return checkForm(this);"
script: function checkForm(form) { var firstname = document.getElementById("wpFirstName").value; var lastname = document.getElementById("wpLastName").value;
The if statement evaluating the last name field is the only statement that evaluates to true. It seems the first statment is bypassed. Any ideas? PS. the element with the id lastNameError/firstNameError is in a div tag.
OK, I am very new to jQuery so bare with me here. I am trying to get the document body height and set it as the height of a table, after the page has been loaded. Below is an example of what I am trying to do.
[Code]...
I am not sure where to place the jQuery code, before or after the table tag...and I am not even sure if any of my jQuery code is correct. Once again, i need to set the table height AFTER the document has been loaded and then dynamically change the height of the table.
I'm using PHP / MySQL / javascript (very new to javascript)I'm looking to set the value of a textfield based on the name (NOT value) of a drop-down. The drop-down is created dynamically from a recordset (see code below):
<select name="mainStory" id="mainStory"> <?php do { ?>[code].....
I am currently encountering a problem with setting "display" property from "none" to "block":
Browsers will refresh itself when the display property is changed; this causes the element to display then suddenly disappear after the page reload. Do you guys have an idea what I can do to avoid it?
I tried using jquery's show command, css command with setting display to block, and pure javascript method like document.getElementById("theId").style.display="block".
I need to pass the selected option of a <select> tag into a query string, so that the page is reloaded with the selected option already chosen. This will occur with the onclick() event hander, and the query string will be processed using a server-side technology. I'm just not sure how to word the "onclick" handler. Here's what I have:
What is the correct wording to set the underlined portion to whatever was selected? I know it has to be done with JavaScript, since the decision is made on the client-side.
I am having an issue with setting the background-image of a another div #x to the background image of #y.Correct me if I am wrong but I think you would do this in a simple case by saying
$ ( '#x' ).
[code]....
So when it does it, it is getting the URL of the generator (I logged it. what is actually being passed is [URL] This would require a server call to generate a new image, In this particular application, even if it wasn't exactly the image y had it would be acceptable. But it's not doing it. It is not getting any image at all. Am I doing something wrong, i.e. is it supposed to just work? I would think not, since the page has already been rendered. This is almost an ajax situation but I don't know how to do it for an image. I don't really want to generate a new image anyway, I'd be very happy to get the one that's already there. How would I access the actual image already attached to y and not do another server call?
