I have a page and there is a 3rd party response that comes in that I have to key off of. IF the third party response exists, then I need to build the iframe and populate it with a src and attributes (height/width) etc...
So basically, the flow is like this..
page loads
callback to 3rd party.
--> is third party connected = yes --> build iframe (in parent page)
---> is third party connected = no --> do nothing
I have a use case in which I need to insert an IFrame as a child to an existing DIV just after the page load completes. That is, the request to fetch content for this Iframe should go to the server "after" all the media in the page has loaded, basically after the page "load" event and not the document ready event.My document structure is as follows:
[Code]...
I'd like to resize an iframe into which different (same domain) pages of differing heights are loaded. I can do a first-time resize no problem. It's the subsequent reloads that need to pass back their height to the parent page There seem to be lots of solutions for that around, but few I can see for resizing each time the iframe reloads. One is described here on another board [URL] but unfortunately the test page is no longer around (or indeed the site), so the full code is no longer available there. This one works, almost, for me: [URL] it does resize for me, but not quite sufficiently high each time - about 90% of what is required: [URL] Is there a way to add on sufficient extra margin that scrollbars no longer appear?
View 8 Replies View RelatedI am displaying a webpage from external domain in an iframe on my site. The webpage being shown in iframe has a header image that I would like to not appear when someone visits my site. Is it possible using Javascript or otherwise to have the iframe scrolled down by a certain pixels by default?
View 2 Replies View RelatedI've got an IFRAME it loads a page with variable contents. I need to know the WIDTH of the body of that page. I'm using offsetWidth and offsetHeight
Quote:
This is weird....offsetHeight returns the height of the document body. offsetWidth returns the width of the iframe!
I'm trying to dynamically build a table based on a checkbox being checked in the first td of every tr:
var tableID;
var isChecked;
var tableImportBuild;
function importData(id) {
[Code].....
I should note that isChecked points to a checkbox inside a table cell. I'm trying to clone the entire row the checked checkbox is in. If I alert $(tableImportBuild).html() from within the each loop I do get the result I was expecting but for some reason I don't have access to that variable once outside the loop.
It seems like when I load javascript code into a page, that each item I add, such as an accordian vertical navbar, image slider, etc, that each time I add one, the page loads a second or so slower with each one added. I would like some of these features, but is this just a part of life, or are there tricks to avoid the slower load time? It is not major time but after the 2 items I mentioned, it added on about 2 seconds.
I read that $(document).ready(function() might slow me down but I do not see that statement in any of my .js files.
I am just starting to use the DOM to do some more advanced
javascripting so please be patient with my question if it is an
ignorant question.
I would like to use the DOM to dynamically create an html table via
javascript. While that table is being dynamically created in a
javascript function I would like to dynamically insert text and a
hyperlink with an image into each cell.
I got pretty far on my own. I was able to dynamically create a table
and insert a string into each cell. However, I was not able to use
the DOM to insert a hyperlink into each cell. I tried adding it as a
new text node and got the text of a link rather then a link. I then
tried adding and setting an anchor element but I got nothing. Code:
I've got this XML file:
<?xml version="1.0" encoding="utf-8"?>
<Menu>
<Section>
<Title>Product Information</Title>
<Topic url="howto.html">How to use This Product</Topic>
<Topic url="product.html">Product Overview</Topic>
<Topic url="sysreq.html">System Requirements</Topic>
</Section>
.....
</Menu>
There's more data than that but for brevity that's the way it's constructed and repeats with several Titles and Topics. Here's the JS I'm using to build a dynamic menu. The goal is to pick up the data and build an Accordion menu out of it:
if (window.XMLHttpRequest) {
xhttp=new XMLHttpRequest(); //create ajax var
} else {
xhttp=new ActiveXObject("Microsoft.XMLHTTP"); //IE
} xhttp.open("GET","menu.xml",false);
xhttp.send("");
xmlDoc=xhttp.responseXML;
document.write("<div class='acc'>");
var x=xmlDoc.getElementsByTagName("Section");
for (i=0;i<x.length;i++) {
document.write("<dt>");
document.write("<a href='#'>" + x[i].getElementsByTagName("Title")[0].childNodes[0].nodeValue + "</a></dt>");
document.write("<dd><ul>");
var y=xmlDoc.getElementsByTagName("Topic")[0].childNodes[0];
for (foo=0;foo<x.length;foo++){
document.write("<li class='acc_item'><a href='#'>" + x[i].getElementsByTagName("Topic")[0].childNodes[0].nodeValue + "</a></li>");
} document.write("</ul></dd>");
} document.write("</div>");
It creates the menu correctly... to a point. It has the correct styling, the accordion works perfectly, it has the correct Titles in the correct places, but when I "expand" one of the Titles it lists the first topic only, and lists it 5 times (the same amount of Titles I have). It then repeats this for every section. Example:
Product Information
How to Use This Product
How to Use This Product
How to Use This Product
How to Use This Product
How to Use This Product
I'm not very confident in the syntax, or what it is exactly doing.
I've been trying to get this page working with dynamically loaded iframe sources passed by URL, but I can't seem to get it working.Here's the relavent code:
<script type="text/javascript">
function delineate(str) {
URL = str.indexOf("=") + 1;[code]...
I used the hidden form to change the url to text - advice from another website. I'm sure there are better ways to do it, but I'll explore them as soon as this thing actually works..The types are in a subfolder named types, as shown. The document.write was placed in as a debug helper, and it displays the proper file location of whatever I select with the combo box, but the iframe doesn't change it's src to the selected page! I've tired the last line of the last <script> with several different methods, none of them producing any effect whatsoever.
I am having trouble writing this javascript for my work, normally I would do this in ASP or PHP, but the environment I am working with will only allow javascript for dynamic function.
The form has two different select boxes and based on your options selected for select box #1 and select box #2, the hidden input field "redirect" (which is currently empty) would then populate dynamically with the URL associated with that combination mentioned below. The hidden redirect input field (now containing dyanmically generated data) would then pass the new value via HTTP_POST to .net script that will handle the redirect processing step fed to it. code...
I was wondering if there any examples out there that create a Draggable ifram
that display another URL in it. In this iFRAME before loading the URL it
will display a progress bar once the url has loaded the progress bar will
disappear.
Using an the FreeTextBox control inside an IFRAME never completes loading - and as I have some actions to perform once its finished loading this is a real problem.
this.designEditor.document.open();
this.designEditor.document.write("<html" + ((this.textDirection == "rtl") ? " dir='rtl'" : "") + ">" +
"<head>" +
((this.designModeCss != '') ? "<link rel='stylesheet' href='" + this.designModeCss + "' type='text/css' />" : "") +
((this.baseUrl != '') ? "<base href='" + this.baseUrl + "' />" : "") +
"</head>" +
"<body" + ((this.designModeBodyTagCssClass != '') ? " class='" + this.designModeBodyTagCssClass + "'" : "") + ">" +
this.StoreUrls(this.htmlEditor.value) +
"</body>" +
"</html>");
When I step through it in Firebug it seems to step OK - but it stays loading for as long as I have been able to leave it. I have no idea why that document.open() line is causing such a problem.
For now I've made these lines conditional to IE as it doesn't seem have a noticable effect on the operation in Firefox. I would love a fix to this if anyone has one - support at the FreeTextBox site is a bit on the sparse side.
I am trying to write a class that dynamically loads scripts and css files, but ran into a problem I just can't seem to solve. Below is a simplified version of the class:
Code:
function DynamicResources(baseUrl)
{
this.baseUrl = baseUrl;
}
DynamicResources.prototype.loadScript = function(file, onLoad)
[Code]...
The loadScripts function should keep track of the scripts that have finished loading by removing them from the loadingFiles array. The problem is, that the changes made to the array in one call to the local function fileLoaded won't show up in the next call (no elements are ever deleted). I suspect this has something to do with scoping rules, but I can't quit get a grip on it.
I am using this code to refresh the browser after a iframe has finished loading. Does anyone know a cross-browser one that will work on all browsers. I have tested it on firefox and internet explorer, it seems to only work on firefox.
PHP Code:
<script type="text/javascript">
window.onload = function() {
document.getElementById("updates").onload = function() {
[code]...
To begin, I'm a novice at this. I'm using 2 JQuerys on a page -
[Code]...
The first fades a page in and out when loading. The second 'smoothly' scrolls the page down to anchor text in the page. The problem is that the 1st script 'overpowers' the second, so when you click on an anchor text link it starts to 'smoothly scroll down, then the first script kicks in an re-loads the page. Is there a way of stopping the first script if the second one is being used?
When the DOM is ready you can write:
Say now, you want to try and do some animation done by default, in the below example I have done some animation only when the user do mouse over, how can i do that by default as in when the page loads.
JQUERY the script below works great when you click the button is shows a nice animated banner howeverIneed it to show up when the page loads.
<!DOCTYPE html>
I am launching a web page in an iFrame and then clicking the "Start Tests" button provided by QUnit. All the tests for the loaded page correctly show asserts for each test. I then do $('selector').trigger.('click') to go to a new page. Since the tests for this page start running before the page is completely loaded I see failed asserts. This is expected.
So then I try something like:
What happens is that I see no assert result in the QUnit test report for 'test C'. If I remove the stop, setTimeout, and start calls then I see the assert, but of course if fails.
I am aware that unit tests are supposed to be independent of each other and not need to run in a certain order, i.e. scenario testing. What I want to know is if QUnit supports some way to pause and then restart groups of tests.
My site, lizbmorrison.net, uses an adapted version of superbgimage and I've been trying to find what controls the visibility of #showtitle. Currently its automatically hidden when the page loads, and can be toggled by the info button in the lower right corner, but I'd like it to be visible by default.
View 2 Replies View RelatedI'm using Chrome and it's JSShell extension I remove the <emb> and some <iframe> tags from a lot of different sites because their annoying ads.
The I use code for most sites looks like this:
It doesn't do anything. If I don't use $(document).ready() it removes all the ads. Is there a way to do that before loading the document or am I doing something wrong.
I was hoping there is some way to fix this, in IE7 and 9beta when you navigate between pages from my main nav the page loads scrolled to the bottom. It seems to be pretty random and will not reproduce consistently. Is there a way to force all anchors with a certain class to scroll to the top?
View 1 Replies View RelatedI need to run a php script in the background after one of my pages loads (eventually it will be 2 or three background scripts depending on the user.) I am guessing I will need to use $.get for this but can not seem to figure out how to do it. Currently I have the following in my code:
$.get("ARS_newEmployeeMailer.php"
, {userid: "1004"
};
[Code].....
However, this php is not being called.
Is there a way to ensure that only the first image in my image slider shows while the page is loading? Currently all of the images appear stacked on the page until the page has finished loading.
Here is a URL to the site: [URL]
How to disable all clicks till the pageloads
View 2 Replies View RelatedI'm having probs with append(). When the page loads I add a function to certain images:
But after appending a now row, with a similar image, the onclick function on that row doesnt work, seems like it needs to be reinitialized or something.
I tried making a function of:
But when I call that function after appending, the new image is not clickable and the images that were already there, get an extra function on click.