I would like to achieve such thing, as to load some part of other page, like this:
$("#content").load("example.com/main.htm #content > div");
but I need to do a beforeSend callback, to fade out the current content, wait until it is fully hidden, and only then fade in with the received ajax request. But doing this, for example, with .ajaxSend, the content loads much quicker, then fadeOut is complete.
I need to set some headers (I wish this were doable by just passing in a map), but it seems that beforeSend is never being called. Needless to say that's a bit of a problem for me.The alert below never occurs (and a breakpoint is never hit if I put it there), but I can see that the ajax request is being sent.[code]
View 7 Replies View Related[Code]...
when i load page it does nothing only blank page, may have code in wrong place but not sure so can someone show me a working example so i can find out what i'm doing wrong also i would like the part of page to refresh evey 120 seconds is this possibe with jquery?
When you load part of pageB with ajax into pageA, what happen with the head section (title, meta, css link and script link...)
I mean, what is the best practice when you insert into the DOM a part of pageB with all the code (title, meta, etc...) that is associated with pageB. (initially i was inserting the whole pageB because of "gracefull degradation", but this inserts the whole pageB DOM into the pageA DOM).
i have 2 pages one is the main and the other is the sub-main
main,html :
<A href="sub-main.html#post5>go and load just post 5</a>
sub-main.html :
<DIV class=posttop id="post4">
here you can write anything ;)
[Code]....
as shown up the code will first load everything in the sub-main.html page then after Finnish loading will reference to the specific post "post5" and selected of highlighted but if the numbers of the post lets say 20 posts inside the sub-main.html it's will take to load forever . what i want to is when i click the link in main.html to go to the post5 in the other page how can i load just the div element of the "post5" and the rest give the user the option to load it if he wish to see the whole posts
i was using $.ajax method to get my ajax page on my main page,which is working great.But now if i have links in that ajax page then i can't open them in that same div,the links are opening in new window,but i want to open in same part,i tried google it and then found, i have to use iframe instead of div.how to do with only use jquery and div.
View 3 Replies View RelatedI am currently programming Script Adds data to the database but if i want to Shown the data that have been added Requires refresh the page to show the Data that have been added . and I do not want this method.I want to when adding data to show updates as soon as the addition of data.This can be done by Ajax , and An example of this method used Google Gmail.
View 3 Replies View RelatedI think that in jQuery 1.6 the callback function is failing in IE(8).I've reverted back to jq1.4 and all is okay. Sample code that fails in 1.6 for IE
8;$('#add_edit_contact_content').load('company/ajax/dsp_addEditContactContent.cfm', function(){
alert('loaded');
});
The error reported is; Message: Could not complete the operation due to error
80020101.
Line: 16
Char: 11777
Code: 0
URI: http://localhost:8300/XXXXXXXX/application/scripts/jQuery/jquery-1.6.min.js
I'm a jQuery novice and I think I've gotten myself in over my head here. I have a #Calculatebutton with a click function attached which, when clicked, iterates through a form and sends the users input values, via $_GET, to a php script called'prepsession.php'. Here the inputs are validated and sanitized, a session is started and some session variables are created using the form input values. If there are any errors I want error messages displayed beside the form. Everything works fine up to this point.
If this script runs ok without giving any errors I would like to fire another php script called'printsummary.php'which accesses the previously created session variables and inserts them into a div #PanelContent. The reason I am usingseparatephp scripts for this is that I would like to be able to print my data in various different ways so I have numerous php print scripts accessing the session variables.
[Code]...
i want to load my entire front page with jquery, after a button is hit. Something like redirect to front-page.
I've already got the handler on the button, that executes document.location.href = '/index.php' Its working, but i'd like to make its behave like(pseudocode): $.ajax('/index.php') or: $.load('/index.php')
Is that possible, and if it is, how can i do that?
This script (below) is firing at page load. how not to get it to fire until and event happens.
$(document).ready(function () {
if($('#DrainStackDiameter').val() != null){
$('#PowerPipeConfigurations').change(function(){ getResults
(); }).change();
[Code].....
Using AJAX to load content within a div. Need to find a way to scroll to the top of the page after loading content inside div on same page. After clicking on my bottom links, loading the html inside the div, I want the the parent window to scroll up to the top. scrollTo did not work.
View 1 Replies View RelatedIf i have two web pages, say A and B. If I use ajax to load A into a div located within B what would this do considering that both pages have doctype, html, head, etc.? Would this cause a problem or would I be better off parsing out the section of A that I want to include in B?
View 3 Replies View Related I'm working on an embedded device and I want to display only part of the original configuration page by building a jQuery page on top of it. Unfortunately, the code that generated the pages was not ajax friendly in the sense that the only way I have to identify the parts I want to show or hide is the class attribute. Up to now, I've been able to load the page with the simple code:
<div class='contentcontainer'>
<hr> <div id="content">
</div>
</div> <script type='text/javascript'>
[Code].....
But it doesn't work. Then I read on the [URL] that I would need to wrap it:
Chris Moore
9 months ago
If you want to load some content into a div and then manipulate it afterwards ((ie: loading something your use a template for a message window and then want to change the message contents) you *must* do it by wrapping it in the completed function handler..
Don't just throw it a few lines down, you'll get random chances that the selector will
how I should do this? Do I need to replace the test() function by a function that will do the post treatment? How then?
in this example: $(el).load('/data_url', function() { alert('loaded') } );
will the alert be called after the html fragment has been loaded into el and all its elements are available to access or is the callback just after the ajax call has finished ?
I have an unordered list with each LI having an onclick event of "changeTabContent". When the page loads, I trigger the active LI's click. On a click, first thing I do is remove the previous results, which are a UL living under the "li.active" element. Next, I move the "active" class to the LI that was pushed and off the old one. Next, I add a loading animation to the screen. Next I append a new UL to the new "li.active" and use the load() method to insert a bunch of LI's from a different page. onSuccess, I remove the loading animation. [note 1] Next, you'll see a hack I added, more on that in a minute... Last two steps are to add a "more" link to the bottom of the returned li's, if a link was passed into the function, and finally I remove a handful of LI's (excluding more link) so there are only "x" on the screen.
My #1 problem is that the more link is not showing up at times, and the cleanList function is not removing LI's. I believe the problem is that with the load being async, sometimes those last two steps are being hit, but there is no LI's in the DOM yet. You can see I tried to run a hack so the while loop will execute when there is no "ul" yet. [note 1] - I tried to add the final two steps into the load() callback, but the LI's were NEVER loaded in the DOM when the callback function was executed.
[Code]....
I tried to do a loading bar during the computation of the data of my google map, unfortunately without success for the moment. I use the load function serveral times but never with a google map / javascript, that's probably the problem linked to it. Here is my 2 html pages : 1- dynamicmap.html 2-googlemap.html.
For information, I worked with Django, the googlemap.html works very well when I used this "outside" the dynamicmap.html ... I tried to add the function "initialize()" as argument to load function. I am very lost about how to do. Any remarks is welcom i am still new in webdevelopment, but experimentend in classic programation.
[Code]...
I have a problem hiding elements after ajax respons.
I have a JQuery script:
$(function() {
$(".tab_content").hide();
$("ul.tabs li:first").addClass("active").show();
$(".tab_content:first").show();
[Code]....
onClick event binded on <li> tag with live() works fine. But I need to hide some tags immediately after ajax call. The jquery script is included together with some HTML code in returned HTTPrespons content data. Is it possible to do this without setting css display:none property?
How do I get the callback for load() to wait until the load is complete?
View 1 Replies View RelatedI would like to use ajax to load a html page and get the content of a specific div. Is it possible to do this?
View 3 Replies View RelatedI have a section at the bottom of one of my pages that gets data that can be further filtered by weeks. Users can click on any of the weeks to see the data that applies only to that week. This works just fine, but when the function finishes and replaces the html content of the div, the page jumps to the top so that the user has to scroll back down to see the results. I'd like to avoid that. [code]...
It's nothing terribly complicated. The 'weekSelection' links are disabled until a stakeholder is chosen, then they're good to go. The weird bit at the url variable is just some ASP.NET MVC stuff.The StakeholderForecasting div gets its contents replaced and all will be good as soon as I can maintain the page's position.
I'm trying to load dynamically some content and I'd like to fire a function when all the newly added content (including images, iframes and scripts in it) are loaded:
var htmlStr='html string including images, iframes and scripts';
$("#contents").html(htmlStr).load(function(){
alert("all images, scripts and iframes are fully loaded, you can continue");
})
According tohttp:[url]....(at least how I understand it) this should work: Theloadevent is sent to an element when it and all sub-elements have been completely loaded. This event can be sent to any element associated with a URL,images, scripts, frames, iframes, and the windowobject.Unfortunatelly my function is never called. For the meantime I found a workaround:
var html=$('html string including images, iframes and scripts');
var elements=html.find("img,script,iframe,frame");
var loadCounter = elemets.length;[code]....
I have an ajax based page, which loads content from external page (html +js) So if i have a div "update_div" being updated with external content (html+js)
Let me be more specifig
Step1: Ajax content along with js loaded into update_div from a.html
Step2: Ajax content along with js loaded into update_div from b.html
What happens to the js loaded from a.html? Is it lurking in the memory or automatically/magically removed from the browser memory? I am afraid of memory leaks, if the js is still lurking in memory, the more ajax calls made, the more js is going to be held up in memory. Unless am totally wrong; i have no idea of the mechanism happening.
I am using a Jquery/PHP/MySQL login script which is supposed to display an error or success message when the user enters their username/password and also if the username/pw is successfull go to a secure page. Right now as I have it coded, this isn't working properly. Basically nothing is displayed either way.Also,wasn't sure if I just needed to replace, the ?secure-page part with the file name of the page I want to go to if successful?Here is the code as I have it now.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>[code].....
I am trying to incorporate two javascript files (using jQuery) and they are creating a conflict.If the main js is on the page part of the page does not work. If I do not include it my menu and some related features do not work correctly.One code is long so here is the link to it: *I removed Link* (this is the main code for the menu etc)The other js is:
$(document).ready(function(){
Engine.Initialize();
if( !$('body').hasClass('index') && !$('body').hasClass('homepage') ) {[code]....
today I updated my Firefox from 3.5 to 4.0b3 and it seems that the AJAX success callback is not longer fired. Firebug shows the correct response but the function is never called. Is this a Problem of the FF Beta, or is Jquery responsible for this?
Here is my Script
$.ajax({
url: 'ajax.php',
success: function(data) {
console.log('success');
[Code]....