I have 3 sliders on my home page and I would like to make them start one after the other, so 1st would start immediately, then after a short delay the second one, and later the 3rd, so they don't make the transition at the same time. The slider I am using is Avia Slider [url]
Trying this code but they are still running synchronously:
Code:
How can I achieve what I need?
I am using the slideshow script below on my website and would like to know if it is possible to delay the start of the slideshow until at least the first image has fully downloaded.
View 4 Replies View RelatedWhen it comes to JavaScript, I am implementing a couple of Coda sliders onto a site, and as far as I am aware, you can have two sliders on one page, but for me this isn't working.
The effect is using jQuery, and the page can be found here: [url]
The first slider works well, but the second doesn't load properly.
I've used Jquery Cycle to build thefollowingpage: [URL] As you can see the slides runnicelyin sequence with a clickable navigation. I would like to be able to run this slide show from a random starting slide on each page load, but for the slide show to remain in sequence and not load random slides thereafter. I'm sure this is doable - but the only random syntax I've found for this plugiin loads just random slides, out of the running order, which makes the navigation run randomly. I just want the starting slide to be random.
View 1 Replies View RelatedMy problem is when the page loads, the javascript slideshow starts to play even if the image has not yet finished loading... in effect the first image is not displayed since the image is still loading..
what i hopefully want is to start the slide show when all the images has loaded so that the slideshow will run smooth. code...
the javascript slideshow starts to play even if the image has not yet finished loading... in effect the first image is not displayed since the image is still loading..what i hopefully want is to start the slide show when all the images has loaded so that the slideshow will run smooth..
Code:
<div id="slideshow">
<img src="Image/image1.jpg" alt="Slideshow Image 1" class="active" />
[code].....
I'm looking to implement 2 different sliders on a page. the test page is [code] the main picture besides the passion leadership is jquery and does not move on this page however on every other page where that is the only slider it works.Now on this index2.php page you can see i put a slider in for a scrolling banner underneath the main banner and it works fine.Is there a way that I can have the 2 work hand in hand.
View 2 Replies View RelatedI am trying to calculate a value based on two sliders.
This is the code that I am using:
var value1;
var value2;
$(function() {
[Code]....
Really struggling trying to get 2 seperate sliders to work on my web page.
take a look at;
[URL]
not a spam its test site so nothing to gain from my end.
the slider at the top works fine, but the 3 boxes with the arrows underneath should scroll/slide back and forward when clicked. If I remove the js links for the top slider the bottom then works;
<script type="text/javascript" src="js/jquery.js"></script>
<script type="text/javascript" src="js/jquery.validate.js"></script>
<script type="text/javascript" src="js/jquery.fancybox.js"></script>
[Code]....
which isprobablyeasy to tell, but I was hoping someone would be able to answer my question regarding the jquery accordion content sliders or point me in the direction of one that fits my needs.I am wondering if there is an accordion plug in out there that will reveal content based on whether or not you've moused over an image or clicked on it. I've seen a few, but what I have yet to see is one where the button is in a separate div than the content holder.For example, you could have a rotating image you roll over with your mouse and 200 pixels to the right text suddenly appears to define the word image you just rolled over.
View 2 Replies View RelatedTo have multiple linked sliders that all share a maximum value, for example, I would have 10 sliders, each set to 50, with a pool of 10 additional points to spend. If I assign all 10 points to 1 slider, the other 9 are locked out, or I could spend 1 point on each slider.
View 1 Replies View RelatedI am working on a project. I have to put up a tab panel of four option. And in each tab i have to put an image slider. I have used many plugins for this. Tried different plugin for different tab. Few times have problem with tab panel and few time compatibility with all browsers have been issue.
View 1 Replies View RelatedI am looking to have multiple image sliders (javascript / jquery) on one page. I have built the framework and have gotten one slider to work.
However, when adding in another slider, I have only confused the situation.
Below is the html and css. Let me know where I've gone wrong here.
Will I need another set of css classes for each slider?
How do I call a second slider?
The html/javascript:
I have found this nice background rotator:
Code:
<style>
body
{
/*Remove below line to make bgimage NOT fixed*/
background-color:black;
background-attachment:fixed;
background-repeat: no-repeat;
[Code]...
when i run it, i have to wait the 9000 timer to c the first image, and i need the page to start with an image and then start the rotation, i have assigned background-image by css, and tried also to use document.body.background, but when i do this the rotator doesnt work.
Having a problem on a clients website incorporating two js sliders in the same page. The scripts before editing were the TinySlider and TinyFader from [url]
The parsers in Internet Explorer, Firefox and Chrome cannot seem to differentiate between the two scripts, although I tried altering various defined names for script control it didn't make much difference.
The problems are the controls of the first slider operate the second and only the second slider works. Also, I'm getting validation errors (document type does not allow element "li" here; missing one of "ul", "ol" start-tag) where the showroom (second) script content lies. Not sure if this is related or not but either way if I try to fix it the only working slider is broken.
Here is the testing url.[url]
does anyone know a good online resource that shows you how to do image sliders on a web page? For example, I have a image and a arrow (image) above this and the position of the arrow is dependent on a value (which I have).
View 5 Replies View RelatedI have two sliders on the same page. They are both essentially the same pictures, just different sizes of each other. Demo site [url]
How can I make it so that when you click on one image on the bottom, the top slider changes to the picture that was clicked?
I have a Nivo slider on each page of a site. The first page I put it on works fine, any other slider will not work the area that should be the slider simply appears as a block of colour.I initially thought that changing the id's would make no difference as each slider is on a separate page but decided to give it a go anyway as I had no other idea as to what it might be causing the problem.So, I have tried renaming the id's of the subsequent sliders (i.e #slider2 etc) and changing the call to the function at the bottom of the page to match this for example;
$(window).load(function() {
$('#slider2').nivoSlider();
});
and also adding these id's to the CSS to ensure the styles are applied to the new id's but nothing seems to work see here [URL] Ignore the rest of the pages I have not implemented the slider on these yet.
I'm trying to set up a page that has one big image slider that displays a set of images by default. Then underneath this there are links for more galleries, and when you click on them they load right there in the big image slider. I don't want these links to go to a new page. What I'm after is demonstrated at this URL: First Comes Love **|** Wedding Photography by Alison Bank
How do I set this up? I'm thinking I need some kind of preload images code?
I am considering using Nivo Slider, but open to suggestions. Also, I'm building my site in Wordpress if that has any impact.
Problem: I have a piece of HTML-content, with <hr/> as section breaks. I want to replace the <hr/> with a new <div>. Thus, original: <div>Test test test<hr/>Test test test</div> Result: <div>Test test test </div<div>Test test test</div> With $('hr').replaceWith('</div><div>') it does not work, because the replacement is not valid HTML.
I want to create columns, with <hr/> the column-divider. Perhaps there is also a better solution. The editor is creating the content and inserting HR's where a new column should start.
I created a progress bar with timer, every second = 1% in the progress bar. The problem is that the progress bar does not start.
This is the code I use:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
[Code].....
I have been using JQuery from last 1 year with IBM RAD 7.0 as IDE and WebSphere 6.1 as app Server without any problem.Now my development environment is upgraded wtih IBM RAD 7.5 and WebSphere 7.0 server.After writing the code in jsp within <JavaScript> tags as [code]i am getting the following error.The function $(HTMLDocument) is undefined.I have included jquery-1.4.2.min.js and even replaced with jquery.min.js.But there is no use.
View 4 Replies View RelatedI use simple code
[Code]...
I have a page on a site that features a list with clickable items in it. When one item is clicked, a div slides down that displays another div with more clickable items. What I am finding is that when I click on two items in the first div quickly, two divs drop down and clutter up the space on the site forcing everything else on the page downward.
$('#cars').click(function () {$("li").removeClass("active_class");
$("#cars").addClass("active_class");
$(".car_type").hide();
$("#cars_div").slideDown("slow");
[Code]..
So basically, the <li> with the id of "cars" removes any active class from the list items, adds the class to the currently selected <li> hides the .car_type and slides down the matching #cars_div. If I click on "cars" and "trucks" quickly, both divs with the class car_type are displayed at the same time.
Is there an easier way to complete all these tasks while toggling between the div that is displayed so only one shows at a time?
I m very new to use ajax. but i know the basics of ajaxcall and basics of javascript. Please help me how to start with makingajax call ..please give me also sample code
View 1 Replies View RelatedI have simple problem in which I want to set the difference of 2 datesmax 60 days.I am able to select dates from past in 2 textboxes and I want whenuser select start date , the end date calender should disableeverything after 60 days..here is the code I am using:
Date.format = 'mm/dd/yyyy';
//this function is used to show only past dates in calendar.
$('.date-pick').datePicker(
[code]....
