1. Load the first page of a series of pages into an iframe when you click a link 2. On each click load the next in order page 3. When last page has loaded if clicked again will start from the beginning.
What I am doing: I am creating a tutorial for a friend who cannot figure out how to use her new rental management program. I could use a manual slide show to have her click for the next image however, there are a LOT of tutorial images which show her what to do at that point. Her program contains a great number of setup screens, report screens etc. This means the slide show would be sitting there loading all these images before it will work. So, I figured, OK make a page with an iframe, and then I could put each image on it's own little page i.e. page1, page2 etc. Place a little button, or a next link, then have the link load the pages into the iframe in order.
I'm setting up a video gallery on a site. What I want to happen is that when the user clicks on a thumbnail it then opens and plays the corresponding video clip in shadowbox.
What shadowbox opens is a page which holds the video player object. What I need to happen is for the video reference to be passed to the page that shadowbox opens.
I don't know how to do this. I can get this working where the thumbnails are all on the same page as the video player object. The link on the thumbnail images is as follows:
What I was trying to set up was to get the page that shadowbox opens to automatically run the loadVideo javascript with the reference variable passed to it in the url.
I have PAGE1 with the link to PAGE2 with iframe. (iframe load several naked html). I want to add directive to the link to point sprcific content of iframe. to make it clear
link on PAGE1 -> load PAGE2 with iframe -> iframe content is specified on link = whole PAGE2 with iframe with desired content...
solving problem with creating several different PAGEs2 poining wanted iframe src is not the case.
Having a bit of trouble with this. I'm not a JQuery novice, but can't seem to understand why the Triggerhandler isn't working for this particular PHP site I'm working on. I've used the same type of code in a Drupal site successfully.
I can't seem to find a plugin that can help with either.
I understand the thread title isn't very descriptive, but what I am asking is hard to describe. Basically, I am linking to ID elements on the page. Once the link ttp://www.example.com/page.html#linkID is clicked, it jumps down the page to the ID.Normally, this is not an issue. However, I have a fixed position navigation panel layer above the page content. When the link is clicked, it cuts off part of the content that I want visible because the fixed position layer is covering it.Is there a way with Javascript (even better if it can be done with CSS) to control how far down the page goes once a link is pressed? For instance, can I say: On link press, go to ID and apply top: 20px; or something to the effect?
ain question:can I work with variables in jQuery selectors?I have 5 links with different HTML-IDs on my page. and there are about 75 pictures with HTML titles from one of the 5 link groups. the name of the link IDs match the 5 possible title attributes for images.if I click on a link, I want to make fancy jQuery stuff with all the images that have a title with the same name as the IDs. the code template:my noob-ask-query would be as follows:
var matchingname = $("a").attr("title"); $(matchingname).click(function () { $(".matchingname").eq.hide();
Since this list include every country in the world (a long list) I'd like to offer users the a few text links along the side that select popular countries within the list without having to scroll through the huge list ... click here to select United States, click here to select Japan, etc.
I have a single webpage that contains information on all 50 U.S. states. There are 50 links at the top to jump down to the state you want, and at the bottom of the information for each state a Back to Top link.
I'm making the Back to Top link into something more complex, and it will require three or four lines of code.
So that I don't have to repeat the code 50 times, and create a burden when I need to edit it, I want to place it in a .js file and call it x. Then below the information for each state I'll simply have:
Does calling code from a .js file 50 times slow down the page load? Which method would load faster?
I am wondering how to select a div on a page that is loaded using the .load() function.I have tried using a function in the callback of the page to select elements but this didn't work.It appears the pages are called after a the document has loaded (which makes sense) thus anything I place on the page that is loading the various data into the the content div can't selected the newly loaded content.I could include the new script on the pages I am loading but this would result in the undesirable editing every page I have made.
I am trying to use facebox on my site where when a thumbnail of a image is loaded, the large image appears on top. Currently when I select the thumbnail link it goes to new page with large image. I have done the following but still doesn't seem to be working.
I have downloaded css and jquery files and places in relevant folder, also given images. <a href="<?=WEB_PATH?>/images/large/<?=$Row['file_name']?>" rel="facebox"> This is where my large image files are saved.
I have some javascript code that does some GET and POST requests that are required. Sometimes it doesn't fully execute for the user because they close or click onto another page before the javascript is completely done. Is there anyway I can let all of the javascript load first and slow down the actual page load of the website.
I am building a web application using PHP. It lists each salesperson and below it, the clients assigned to them. There are only about 5 or 6 salespeople. There could be any number of clients for a salesperson. Each salesperson is given their own div and client information (name, email, phone) is grouped with an unordered list:
I would like to be able to delete (actually hide) either a salesperson or client depending on which link the user clicked. I have been using JQuery throughout my site so far and I can accomplish the task for the salespeople by creating individual events for 6 salespeople. If there are only 5 people, the 6th event will never be triggered. If there are 6, everyone is covered. The tricky part are the clients since I can't guarantee a specific number of them. I would like to fit best practices as much as possible and reduce the complexity of my code if I can. Keeping that in mind...Is there a better way to handle the salespeople rather than rewriting the function 6 times? Can I pass a variable to a JQuery function using the onClick binder on the <a> tag --> <a href="#" onClick=deleteClient(10)> and use the variable to determine which client to delete? Would using a function in plain javascript and ignoring JQuery for this entirely be better?
I have seen the "Select All" button or "Highlight All" button on numerous sites in the way of selecting text in a form field, but what I am wanting to do is with a button select all text in a table so all the viewer needs to do is press CRTL+C to copy the text. I have tried javascript:document.MyTable.select(); but it doesn't work. It really isn't an option for me to use a text box for the data as it is being formed dynamically in a table from a database.
Is it faster/more beneficial to have two snippets of code be generated by php at 2 different urls and then have a load function for each url? Or have the two snippets on one page, surrounded by id's and then load them that way?
I'm having an issue with the status bar in Mozilla and Netscape showing that it is still waiting on the page to load even after it is finished. This problem does NOT occur with IE.
In summary, I am using a onLoad event in the BODY tag to communicate back to another server each time a page finishes loading. I do this by using a "new Image()" and setting the .src property to the server. The .src includes a value in the querystring so I know what request it was that finished loading.
The challenge here is that the status bar still shows "Transferring data from www.mysite.com..." despite the image being loaded. It never clears and leaves the user with the impression that there was a problem loading the page. My web server logs at the mysite.com show that the browser does indeed make a request for the image and I get the querystring just fine and it returns a status of 200 so the image is being found and served ok.
I've tried everything I can think of to solve this and really could use your help please. Bottom line is that if you use the "new Image" statment from within the OnLoad event of the Body tag, Netscape and Mozilla never seem to update the status bar to show "Done" despite it succesfully loading the image.
Here is a simply snippet you can use to easily reproduce this issue:
when you click on the link a new page html page opens and on that new page, information found in a database with the id of 12(as found in the link) will be displayed using external style sheets etc. Can this be done with html css javascript and json? P.S I know how to do this with php however I want this to be done in my mobile app so the actual page cannot be a .php page
I use jQuery load function to load another page into part ofcurrent page in asp.net. it is work correctly but insecond page i haveone instance ofCKEditor that is not loaded in first page after use load function.
I know the question begs a question. Why? I have no control over the DB or the Forms. Using 3rd Party based web app. I have this: $(document).ready(function() {
I am trying to add a class to my menu for the page it is currently on.
I followed this example: [url]
But I am not able to make it work at all.
Here is my HTML:
To make the nav element highlighted, the list item must have a class of 'hover' like this '<li class="hover">...'
And here is my jQuery:
The script is not applying any CSS to the list elements. I tried different combinations, tried to add a class to the a element by removing parent(), but nothing is triggering.
when i load page it does nothing only blank page, may have code in wrong place but not sure so can someone show me a working example so i can find out what i'm doing wrong also i would like the part of page to refresh evey 120 seconds is this possibe with jquery?