I have a submit button which is disabled unless you agree to the terms.What I want to do it pop an alert if the terms checkbox isn't checked.This is what I have so far, which enables the button is terms are checked, and disables if terms are unchecked... but how do I add an alert in there?
Code:
function apply()
{
if(document.form1.agree.checked==true)[code].....
I am trying to throw an alert with the attributes of a submit button in the alert.
What am I doing wrong?
I'm trying to set up a form such that the Submit button will be disabled until a set of values has been set in the form.I have latitude and longitude text input elements (named coordPointLat and coordPointLon respectively) and they are not acting as I would expect.With coordPointLat set to 354104 and coordPointLon empty the following test always falls down to the line where the Submit button gets enabled.
View 3 Replies View RelatedI have a disabled submit button sitting in the fieldset of a form. What I'd like to do is attach a click event to this button, but from what I understand this can't be done since you can't attach events to disabled elements.
Is it possible to attach it to the fieldset? I'm not completely familiar with event bubbling but maybe it's possible to capture the element clicked?
when the following code is used in my JSP page:
$('#myForm').bind('submit', function() {
$('#submit').attr('disabled', 'disabled');
});
it disables the submit button when my form is submitted (IDs are used). This action displays a result page. If the browser's Back button is pressed to change some of entered items, the submit button in Firefox is still disabled, while the same action in MSIE8 enables it again. I don't know if this is exactly JavaScript/browser/chache issue, how to get the submit button enabled 'automatically' Unfortunately the refresh button in Firefox doesn't help either (probably JSP issue) - I have to press Enter on the address bar which is not very obvious for every user.
I have a form that uses javascript for validation and cost calculating to place an order.
If someone has their javascript disabled, they will be able to submit the form, but without the cost figures showing up.
I want to prevent the user from submitting the form, but alert them that they need to enable JS to fill in/submit the form?
Is this possible? What do I need?
heres my code:
Code:
<script language="JavaScript">
var checkobj
function agreesubmit(el){[code]....
i need to make it like if the button is clicked and there the agreement checkbox is not checked.. it should give an alert that the alert is not checked.. i know that would require a if and else statement but i cant figure out how to do it
I have this form that depending on the shift you choose certain form elements get grayed out. Here's the part that I don't understand. I validate the form in php and display the errors but the form re-enables everything that was grayed out. Not the behavior I was expecting. How would I go about this?I attached a copy of the HTML source created from php.
View 1 Replies View Relatedi am facing a problem after using jquery jconfirm alert. Issue is that after receiving confirm alert, when user press tab to go on Cancel button and press Enter key there, despite of firing event of Cancel button, it fires the event of OK button. this issue is not produced when user press the cancel button by mouse. Waiting for your replies.
View 1 Replies View RelatedI've been tweaking a small AJAX login / user search page and I've run into a problem. I have three buttons, "Submit Query", "Add User", "Delete User" and a JS using DOM to modify everything on the login.html page.
I have a single external CSS file that controls the login.html page, buttons included. The way it works right now is the "submit query" button is blue, "add user" is green, and "delete user" is red.
In my JS file I diable the add and delete buttons if that user name already exists. Disabling the buttons is working correctly but changing the color of the disabled buttons isn't working. Here's what I've tried so far:
if( Name != null ){
b2.disabled;
b3.disabled;
b2.style="color:blue;background-color:yellow";
- or -
document.getElementById('b2').style = "color:yellow;background-color:yellow";
b3.style="color:blue;background-color:yellow";
- or -
document.getElementById('b3').style = "color:yellow;background-color:yellow";}}
I even tried adding a .disabled class to my css file:
#b2 .disabled{
color:blue;
background-color:yellow;
}
But nothing has worked so far. If you'd like I can paste all of the code, i.e. JAVA, JS, XML, CSS, HTML if anyone would like a working AJAX example.
I've got a form inside a PHP script that posts to itself, does some
processing on the PHP side, and if it looks good, PHP sends a HEADER
command that redirects the user out. All was fine until I added a
button disabler onSubmit to keep users from submitting twice. Now the
form disables the button as requested but just refreshes the page... it
doesn't get to the HEADER command.
Any idea what the problem might be?
<script language="Javascript">
function disable(theForm) {
theForm.send_email.disabled = true
return (true)
}
</script>
<form action="<?=$_SERVER[PHP_SELF]?t=$_GET[t]?>" method=post name=form
onSubmit="return disable(this)">
I have a form and when I post the button disables so no reposting can take place while form is being processed.But now I want to take it one step further by also changing the text of the button to something like processing....Here is the code without the processing.....
Code:
<form action="orderall.php" method="post" name="myform" id="myform" onsubmit="javascript:disableSubmit('mFormSubmit')">
<input type="hidden" name="updateidlist" value="<?php echo $updateidlist; ?>" />
<input name="orderall" type="submit" value="Order All" id="mFormSubmit"/>[code]......
I want to keep it as simple as possible.
I have a form that disables the radio options after choosing one and pressing a confirm selection button. Does the disabled attribute affect the value submitted?
View 2 Replies View RelatedWhen a button is clicked, the button then disables (as well as running its normal function).Obviously I'm used to using this.disabled=true but in this instance I cannot access the onClick in the <input> tag because the page is hard coded by a third party application.So I'm trying to make a function which locates the button, notices if it's been clicked and disables it on click. Seems easy to me! However I cannot make it work!Here are the two variations I've tried (both call the function in the page onLoad):
function disableButton() {
document.getElementById('submit').onclick=document.getElementById('submit').disabled=true;
}
[code]....
I'm trying a simple JQuery enable a disabled button once the fields have all been entered for the Horzontal section.
At the moment as long as one input val has been entered it enables the button?
Could someone advise how to make it so it only enables if all vals are entered?[code]...
I have a button and I want it to be disabled (not clickable) after 3 clicks. Also the button text must change at each click.
Example:
Test (3) <- button with text
-click-
Test (2) <- button text changed
-click-
Test (1) <- button text changed
-click-
Test (0) <- button can't be clicked anymore (non active button now)
I would like for a "Pay Now" button to be disabled unless a checkbox is checked:
<form method="post" action="https://form.php">
<input src="https://image.gif" type="image" name="name_of_image">
</form>
I have a script that enables a certain button when some conditions are met. I'm having an issue with it, so I made a simple script to get to the core of what I'm trying to do. This is the script that I'm using:
function disable()
{
document.form.button2.disabled='false';
[code].....
I am disabling an input button on my data entry form until all of the data validates correctly. When I enable the button it does not always display the same as the Cancel button that was not disabled. Ioccasionally appears asthoughthe mouse is hovering over it. I have discovered that if I tab to the button or if I hover the mouse over it, it then displays OK after I tab to the next button or move the mouse off of it.This is the html that defines the button.
<input type="button" id="submitButton" value="Submit Changes"></input>
This is the javascript that inits the button.
$("#submitButton").button().click(function() {
submitData(); // Submits data via Ajax
});
[code]....
I have a table row with <div> surrounded.
I want when page loads , <div> be disabled and when button clicked <div> enabled.
How do I do it ? Can we do it using javascript ?
Can JQuery be used here? how?
On my form I have 3 submit buttons which handle different things.I am looking for a way to stop or continue form execution with a confirm box on the third submit button and the third only.I can't use onsubmit because that will trigger on all three buttons.
View 2 Replies View RelatedIn the following .submit function, I am attempting to grab the value of the selected option in the facilityCodes dropdown list when I click the submit button and then during the submit function,select the facilityCode again in the dropdown list when the page reloads and then disable the list so that the user cannot change it.However,the situation is when I reload the page after the submit button is clicked the dropdown defaults to the first option and the list is enabled.I apparently am not understanding how.submit works so that I'm selecting the option I'm defining in my code below and then disabling the list AFTER the page reloads due to an error on the page. My question is how can I accomplish this?Here is my code:
$(function() {
$("#ARTransferForm").submit(function() {
var msgsCount = 0;[code]....
The following will submit the form data to popup by clicking the submit button. I want it will submit the form automatically to the popup, there is no submit button in this page. Basically this page should not show up.
<script type="text/javascript">
function submitmyform(f) {
f.target = 'foo'
window.open('',f.target,'menubar=no,scrollbars=no, width=800,height=800');
f.submit();
return false;
}
</script>
<form name="myform" action="popup.asp" target="_blank" method="post"
onsubmit="return submitmyform(this);">
<input type="hidden" name="item" value="item"/>
<input type="submit" value="submit to popup"/>
</form>
I'm using mailchimps signup box (they don't have a decent forum to ask on) on my website and want to adjust the submit button and change it to a normal link. Here's the button that submit's the form:
[Code]...
I have a Java form where I need to be able to switch a drop down with a text box using Javascript. The change would be made depending on the radio button choice the user makes. The drop down is the default form element and radio button A is checked by default. So when the user clicks radio button B the text box should appear and if they change their mind and select radio button A the drop down should come back.
Whats making this a little tricky is that I'm doing my form validation using Java via the form element name. So these two will have the same name. I need for the drop down to be switched off/disabled if they have radio button B and vice versa. Is all this doable using javascript?
I have a page with many forms that I need to change from a post to an ajax call. That part is working, no problem, but now I want to disable the submit button while it's waiting on the server response and then re-enable it when the response comes back.
Here's what I have:
$(function() {
$('form').each(function() {
$(this).submit(function(){
[code]...
I can't figure out what my selector should be to get the submit button of the form that's being submitted. What should I be using instead? Also, if the call errors out, I'd like to just post the form as usual.
