I'm working on a site where the name attribute of an input will not be known beforehand. I'd like to be able to modify or extend the validate plugin to set the rules and messages based off of the id of an input instead of using the name.
View 10 RepliesI am having 2 input fields. Both will have only the integer values. Its a minimum and maximum values. The condition is The minimum value of the 2nd input field should be greater than 1st input field. and 1st input field value should be minimum than 2nd input field. For that I tried with
Jquery Script
$('document').ready(function(){
$('#project_form1').validate({
rules: {
minfield: {
[Code].....
I am validating a page (image attached) to make sure that total hours entered do not exceed the allocated amount, which is stored in the database. I have already validated to make sure that they enter a number and that it is not greater than 8.
var returncode = true
var inputs = document.getElementsByTagName("INPUT")
for(var x=0; x<inputs.length; x++)
{
[Code].....
I want to check that only letters were entered in a field.formElements[i].value.search(/^[^a-zA-Z]+$/) != -1Will the above line be true if characters other than letters are found?
View 3 Replies View RelatedI am looking for a little help validating a forms input. On the form are key
items which I do not wish to be zero length.
I have wrote the following function:
<script language=javascript>
function ValidateLength(oid, min, max)
{
var txt = document.getElementById(oid);
var length = txt.value.length;
if(length == 0)
{
alert("You must enter your reference, Company Name and Contact Name");
}
}
</script>
However their are still a few issues I would like to work out.
I all it with my forms sumbit event with the following:
<input type="submit" name="Submit" onclick="ValidateLength('txtRef',0,100)"
value="Submit Details">
However that will only check the length of the item txtRef, how can I check
more textbox values? Also how can I stop the form posting if the alert is raised?
I am using a validating form plug in for jquery and I have a question about it. Let this function will be an ex.:
[Code]....
'e' is the name attribute of one form element, but can I choose more elements using jquery (CSS) rules like this: input[name*=e] or how can I do something similar?
I have a selection list that users can choose one value from about 300 different values. I wish to add some cross value vaidations to ensure some extra data gets entered should the user choose one of 50 of these values. Now I know I can write a JS validation individully fo each of the 50 as follows:
if theForm.field1.value=="25" && theorm.field2.value =="" {
alert("Enter field2 value");
}
Then repeat this alidation 50 times.
My question - is there a way to shorten the code to someting like this:
var fieldx = "1, 2, 3, 4, 5"; etc with all 50 values defined here, then something like:
if theForm.field1.value==fieldx && theForm.field2.value =="" {
alert("Enter field2 value");
}
I'm working on a page that has an iframe that loads a page with a file input on it. What I need to do is validate that file input to make sure that it isn't empty.
View 1 Replies View RelatedWhy my email field is validating, but mycode for validating empty fields is not?
View 1 Replies View RelatedI'm experimenting with the load() function. It works fine except when I try to validate (using jQuery Validate).
I have a page called "index.php" which contains the bulk of my code (including the jQuery validate call). The load function calls in a div from another page which we'll call foo.php. The page loads fine, but it just won't validate. I've wondered if you simply can't validate a "load"ed page, but I find that hard to believe.
Here's my code:
In index.php:
And from foo.php:
I am using the Jquery validationss plugin for my form validations. NowI have a situation where I have two submit buttons in a single form(say button A and button B). For button A, I want to run validationsbut for button B I don't want to run the validations and submit theform without validating.. How can i do this?
View 2 Replies View RelatedI've used this plugin many times and this is the first problem I've had with it (1.8.1). I've uploaded my standalone version (unstyled) here to demo: [link redacted, see reply for solution] try submitting the form, then focusing on some fields and attempting to resubmit. I have a form with 6 fields, all required (class attribute 'required' has been added to them all). On submit, only 2 of the fields display an error message as they should. The other fields do not act as required. Filling in data for the 2 working fields and re-submitting will work, when it shouldn't be.
However, if I click through to focus on the fields, they will appear to "get" the validator property. Clicking submit how, however, will actually toggle the error message on and off. I have never seen this kind of behavior in the past and am scratching my head how to proceed. I have checked in Chrome and Firefox, I have re-downloaded the plugin and used various jQuery versions, I have stripped out the functionality to a completely separate standalone page to remove any potential conflicts. Markup and JS validates. No luck.
I have the form:
<form>
<div id="portion1">
... some inputs ...
</div>
[code]....
By default, only #portion1 is visible. If inputs inside it are all valid, #portion2 will be visible and #portion1 will be hidden, and so
on. The problem is that jQuery Validate will only validate the whole form, so something like $('#portion1').validate().form() won't work.
I need to check that a user's birthday has been filled out completely, using drop down menus. I can validate each of the menus individually (see code below), but what i really want to do is make one check that all three are selected so that I don't have 3 extra error labels.
[Code]...
I am using the validation plugin, and I would like to cause the error message of one of the validation rules to appear immediately when the page loads, before any actual validation takes place. Can this be accomplished in some way, perhaps using javascript? Below is an example form, I would like the "Field is required" message to appear normally next to the input, as soon as the page loads. When the user edits the content of the input, the message should remain or disappear depending on the validation rule, as normal.
<script type="text/javascript">
$(document).ready(function(){
$("#form").validate({[code].....
I'm creating a form that will only allow user with specific at email addresses to be able to submit the form. For instance, these are preferred customers from say a company called Sanderson. Michael may have the email michael@sanderson.com. I want to make sure that my form only excepts emails from this company; only specific @sanderson.com email addressesHow can I do that?Right now I'm trying to use:
<script>
$(document).ready(function(){
$("#request-form").validate({
[code].....
I'm trying to validate a set of dynamically created field names, for example
Name: <input type='text' name="s1[name]" id="s1[name]">
Image: <input type='text' name="s1[image]" id="s1[image]">
Name: <input type='text' name="s2[name]" id="s2[name]">
Image: <input type='text' name="s2[image]" id="s2[image]">
[Code].....
There can be any number of 'groups' but I would want to apply some validation for each item in a group. I can only see that the validation is done by specifying a id? however as the id's are going to be dynamically created how can I do this? can you validate for a css class?
Is there a way to validate a form using a link and NOT a submit button? I have a link on my form that I'm using as a submit button to do some ajax posting. However, I need to validate some of the input fields before the data is sent to the database.
[Code]...
I am sure that this is a BASIC question for javascript gurus but I'm struggling to resolve.The form starts with the cursor focus in the FROM ACCT NUMBER FIELD. When I tab to the next field without entering any value in this text field I want to send an alert to the user that the field is required and put the cursor back on that field. I attempted to do that using:
$(function() {
$("#ARTransferForm\:fromAccountNumber").blur(function() {
var fromAcctNumLen = $("#ARTransferForm\:fromAccountNumber").val().length;
[code]....
I am stuck on this seemingly simple validation loop.I want to iterate through a list of comma separated emails entered in a textarea input and check their validity before submitting the form.For some reason even when I enter all valid emails every other email doesn't pass the validation test!
var okEmailArr = badEmailArr = new Array();
var emails = $('#emailList').val(); // Get email list from text are
input[code]....
I am validating my form fields using jquery validate plugin. but itsnot executing my methods. its hitting my validate() method but notactual validation code.I am pasting my code here for your reference.My javascript code:
mysite.validateFormFields = function() {
alert('here'); [color=green] [b]// its hitting here
[/b][/color]
[code]....
im using Jquery.validate, and I have a particular issue, jquery plugin is validating fields which didn't have rules. this is my code. Im attaching my code.Display name, First and Last name works fine. The wrong behavior is when I change DDL values and Do click elsewhere in the page, the minlenght validation activates for the dropdown lists.
Attachments
markup.txt
Size : 2.11 KB
Download : 276
I am having the following issue, when I try using an image to post Icannot get the validation to run. When I click the button the formsubmits and nothing is checked. I've been searching all over the web One way of coding doesnt work and the other
does. I have included both below.
$().ready(function() {
var container = $('div.container');
var validator = $("#CustForm").validate({
[code]....
Here is my handler:
Here is my button:
How do i trigger a validate when the submit button is clicked?
All of my validations work while I am working with the form but the button does zilch.
I am a newbie to jQuery and still learning the ropes. I would greatly appreciate your help in resolving the following issue: I am using jquery.validate.js plugin to validate a form.
The form has two groups of radio buttons with names ( g1 and g2 ). It also has other elements like textboxes and select boxes.
[Code]...
It doesn't appear to be possible to validate multiple forms on a pages that only has a single <form> tag, using the JQuery Validation Plugin offered by Jörn Zaefferer. The reason I need to do this is because my pages are created with ASP.NET whose architecture generally calls for a single page-wide <form> tag. In my designs, I'd like to submit my data using a custom ajax call to a web-method, and link it to a click event on a button.
Below is an example:
<!
DOCTYPE
html
PUBLIC
"-//W3C//DTDXHTML1.0Transitional//EN" "[URL]" >
<
html
xmlns
=
"[URL]"
> .....
I'm not sure that I fully understand the documentation for the Validation plugin, but it doesn't seem like this is possible, as the plugin seems to need a <form> for each form.