I am looking for a simple parallax/animate like effect, i have a single image and if i hover on it the image should move like the parallax effect. So if i put my mouse in the topleft corner the image should move in the direction bottomright. I know this i very simple but i cant seem to get it working or how to get this working.
View 4 Replieswant to hover over an image and have it animate up and bounce at the end. I have tried several lines of Jquery code trying to do this but all I get is an upward movement.
$('.class').hover().animate({height:'20px'},
I m having trouble restricting an action to a single image. I am trying to make the background fade to full opacity on hover, and have that working like I want to. The problem is that when I hover one image, ALL the images fade to full opacity. Obviously it would be nice to only have the one that is being hovered over. I am sure it is just a simple thing in the code but I just can't figure out what it is.
[Code]...
look at: [URL]
I have built a hidden div as you can see in the source code which contains some text. I have done these for the first two images
I would like when a user hovers over each image, the image to fade out with the text div for that image to fade in.
Then when the user moves the mouse out, the text div should fade out and the image should fade in.
I have this code for a hover effect, it was working, but now won't. jQuery is working, but events from jquery aren't...
$(document).ready(function () {
$("#logoimg").hover(function () {
$("#logoimg").attr("src", "Media/imgover.png");
$("#logoimg").animate({ width: 420 }, 300);
}, function () {
[Code]...
I've been looking for an "Ajax CMS" but decided to learn jQuery to learn how to code it myself in order to earn some geek-girl cred among my male colleagues. I've learn a lot about jQuery in a week but as you can imagine I still have a lot to learn.
I have successfully animated an image (move to the left and increase opacity) when the mouse hovers a div and reset the image (move it back to its original position and reset the opacity) when the mouse move outside the div. So far so good...
Here comes the question: What I need to do -and don't know how to - is when the user clicks on the div the image should stay in the hover position while still being able to hover any other divs and activate the animation normally.
When a different div is clicked the previous "Clicked" div should return (animate) to its original position and the new "Clicked" div should stay in the hover position. Content will be loaded when the divs are clicked but there won't be page refresh since I'm loading the content by using the load funtion of jQuery.
I'm including the code:
I've tried to make a simple hover effect about small images but it won't work. I also tried to make the following script: 2 seconds after page loading image1 changes 2 seconds after that image1 returns to back state and image2 changes and etc.
<html>
<head>
<style type="text/css">
#as:hover{
background-image: url(images/numr.png);
} #ad:hover {
background-image: url(images/numr.png);
}#af:hover{
background-image: url(images/numr.png);
}
</style>
</head>
<body>
<input type="image" src="images/num1.png" id="as">
<input type="image" src="images/num2.png" id="ad">
<input type="image" src="images/num3.png" id="af">
</body>
</html>
I need a marquee effect that will fire an event at the start/finish and it looks like my only option is animate() but I can't get it to work right
View 1 Replies View RelatedI want to animate the menu 'height' on mouseout (it works fine on mouseover) - basically a slide up/slide-down effect.
View 5 Replies View RelatedI've created the following rollover effect but it doesn't work as expected :
$(document).ready(function(){
$('#area-row-2-sub-left a').bind({
mouseover: function() {
var tHeight = $(this).height();
[code]....
animate({height: tHeight} correctly sets the initial height but with a duration equal to zero. Seconf problem : a second mouseover on the element won't show the animation at all.
I want to animate a div when i hover on my "Home" link, the animate would expand the div with the content in it...how can i achieve this using jquery ?
View 3 Replies View RelatedI've been trying to find a way to animate a font-size increase on hover - which I'd expect is probably quite straightforward but so far I can't seem to find how to do it (and incorporate into below).
I have a ul list using "hoverscroll" and would like to use it on this rather than just doing a straight CSS hover font size which is a bit naff.[code]...
First of all, this is the first time that I use JQuery in my life. I have no idea of what I am doing. I have been following the following guide to animate a menu: [URL]... But as some of the people commenting on the guide I wanted the menu to animate with mouse over and mouse out. So I found the hover-function and the following comments on the guide:
[Code]...
I am having problems with the hover queue, see [URL] Now i found this plugin [URL] but assumes you are animating $(this) i my case a div triggers another div to animate
[Code]...
I have a grid that uses RowAltRow as the classes for the rows...is there a way to have the hover applied to both instead of having to define it twice (or more)?
[Code]...
I have an anchored list of items that when hovered over will add a background and change the color, giving it a highlight effect by toggling a class. Something like this:
$("#theme li a").hover(function(){
$(this).addClass('hoverHighlight');
}, function(){
$(this).removeClass('hoverHighlight');
});
When I press one of the anchor items, it runs a function that changes a bunch of css values across the page, including the values of the 'hoverHighlight' class. The thing is after the function runs, all the css changes gets applied (I can see this), but the hover still uses the default values I set in the css file, and not the new ones I set in the function. How do I make it so the hover function refreshes to the new values?
I would like to create something similar but not sure where to start, looking at the code, it would seem they are using jQuery, rather than grab the code, I would like to learn a little bit about how it was implemented, what plugins were used, if any.
View 1 Replies View RelatedIm trying to get 2 elements to execute some effect individually at the same time on a hover.Ive looked at .animate but if I understand it correctly I can do multiple effects but still limited to that single element.[code]So basically Im just trying to get 1st & 2nd on hovers to happen at the same time and 1st and 2nd off hovers to happen at the same time.
View 1 Replies View RelatedI am trying to create a border effect on hover so when the use hovers over a link the css border changes color to create some interactivity and also as a point of reference too.
Here is the code so far I just do not know how to implement the fade effect for the border to fade on hover;
Is there any way that I can simply change this code to work with it.
$(document).ready(function(){
$(".recentbot3, .recentLeft, .recentbot2, .recentcol1, .recentcol2, .recentbotLeft").hover(function(){
$(".recentbot3, .recentLeft, .recentbot2, .recentcol1, .recentcol2,
[Code].....
Can .trigger be used to simulate a hover effect? Or is there another way to force something to think it's been hovered?
View 1 Replies View RelatedI'm designing a website over a WordPress platform and I decided to use the post thumbnails feature to make post's look more interesting. The thing is I tried to do a javascript to make post thumbnails fade on hover, but it's not working, and i really dunno why.
Code:
$(document).ready(function(){
$(".wpis_main .img img").fadeTo("slow", 0.6); // This sets the opacity of the thumbs to fade down to 60% when the page loads
$(".wpis_main .img img").hover(function(){
$(this).fadeTo("slow", 1.0); // This should set the opacity to 100% on hover
},function(){
[Code]...
I'm a jquery newbie and am trying to use it in a simple web application. This application has a controller servlet that forwards the request to a 'login.jsp' page by default. In the login.jsp page, I used Jquery for the hover effect on the submit button. It works absolutely fine if change the extension of the file to html. If it is changed back to jsp, it the javascript is not working. I see the following error in Firebug console:
Syntax Error
[Break on this error] <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"
***Please see the attachments for the login.jsp and login.js files.***
I have the files 'login.jsp', 'login.js', 'jquery-1.3.2.min.js' under the webapps/QT/jsp/ folder.
I'm using LavaLamp [url] for the main navigation on a site I'm building, for a subtle animated effect.
The site itself is a single-page portfolio site with 3 sections organized vertically, "Home," "About," and "Work."
The problem I'm having is that the clicked navigation does not return to its original position on each panel if I double back on it.
For example, if I'm on the Home panel, and I want to get to About, I'll want to select "About." The LavaLamp animation will ease over to the "About" link on hover, and I'll click it, then the page will scroll to the About panel, where "About" in the navigation is being shown as selected (LavaLamp has a "current" class you can apply to whatever you want to start off as being selected)...
And that's great, BUT, say I want to get back to the Home panel. I click "Home" in the nav, and I'm transported back to the Home panel - but when I was there before, I'd selected "About", and since it's all on the same page, the link is focused on "About," even though I'm on the Home panel. Make sense?
I'm not good enough at JS or jQuery to figure out how to fix this. I think what I want to happen is for every link on each panel to STAY where it was originally assigned ("Home" link will stay on Home, "About" link will stay on About, etc.), but animate on hover only.
Is there a way to write something into the LavaLamp JS to make it so the animation works only on hover, and not on active, focus, or visited?
Here's the code, can't provide a demo page, I don't have anywhere to upload it at the moment...
index.htm with an example of what each panel looks like:
jquery.lavalamp.js:
And last but not least, the LavaLamp CSS:
Forgot to add the page js:
EDITED ALSO TO ADD: Could it have something to do with this:
Now, I have a script that has auto complete thing with the help of Javascript and DOM and AJAX, and I follow this tutorial [URL]
Well everything working great, but, I want 1 thing. When the Suggestion box is visible, and has all the options, and If I mouse over them, it will show the hover effect. I want to achieve the same with keyboard. Like if I press down for the first time, the first option will be selected, and then if i press down again, it will select (hover) the next and so on, and similar is the case with up arrow key. Now, when i press enter, the selected option should go to the text box as if I click on a item.
I have the following script which adds a touch of style to the labels that contain checked checkboxes:
function decorateCheckedBoxes()
{
var form = document.getElementById("filtreEtudiant");
var inputs = form.getElementsByTagName("input");
[Code].....
If I take the script away, the css works fine. but as soon as I add the script, I need the orange part to acheive the rollover effect. Is this normal? Is there a way to change the style of an element without affecting it's onhover style?
Is there any way i can fake it, so that the mouse over a hyperlink (when its not), just so the link will display the hover effect?
View 3 Replies View Related