I use jQuery for loading ajax content, changing css etc. I want to make button that does something similar to "Refresh" - changes back all css changes to defaults.
Is there a function that could do this?
There appears to be no difference between these two when the page loads.
<select id="one">
If there is no "selected" then it always defaults to first value.
How can I tell if the page has loaded and no options have been selected?
My jQuery-Plugin shoud produce two buttons with a onclick-event.Problem:The onclick-event got fired, when I call the plugin, without clickingon the button.Why got the click-event fired without clicking the button?Here my (shorted) plugin:
(function($) {
$.fn.rte = function(options) {
$.fn.rte.defaults = {
[code]....
I have a table (not in a form) that has several input text boxes. I want to have a reset button that acts like the form RESET button. I thought I would use the following jQuery method:
Here's my reset button code:
Here's one of my table input lines:
I thought this would be simple, but I can't seem to figure out how to target the text that the user types into an input field before he/she decides to "reset" and start over.
I'm thinking that my problem is that I can't find the correct syntax for my line: $('input.firstname').value('')
I have a form and am calling the insert into page using ajax. However when I click on submit my welcome page, set as my default page is called.
Looking around I think possibly a 401 is being generated by my Header and so it is being set to my default page.
So I guess my questions are:
1. Is this the most likely reason or when you look at my script does something else spring to mind?
2. How would I test to see if I am right (I tried getHeader but I don't think I understood how to set it out properly)
3. How would I resolve this.
My code is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">
<html>
<head>
[Code]....
How can I create argument defaults for a function? I have this function (the purpose of the lines I included were to set defaults if the user forget to input something simply to prevent an error.
Code:
addHSLink = function (hsElem, hsUrl, hsType, hsTitle, hsWidth, hsHeight) { //hsElem[string], hsUrl[string], hsType[string], hsTitle[string], hsWidth[string/number], hsHeight[string/number]
var jQElem = $(hsElem);
if (typeof hsUrl !== 'string') {
hsUrl = '[URL]';
} if (typeof hsTitle !== 'string') {
hsTitle = '';
} if ((typeof hsWidth !== 'string' && isNaN(parseFloat(hsWidth))) || hsWidth !== 'number') {
hsWidth = 800;
} if ((typeof hsHeight !== 'string' && isNaN(parseFloat(hsHeight))) || hsHeight !== 'number') {
hsHeight = 600;
}
//Some other code
}
I would like to save some programming space and time by finding another way to set defaults. I saw somewhere that you could set a default in the arguments list
Code:
function someFunction(aVariable = false) {
//some code
}
But when I try to do this with all my arguments, I get the error:
"Missing ) after formal parameters".
I have a long form and I have some checkboxes that do a onclick and show and hide the sub forms. This all works just fine but i want to onclick to also load some defaults into some of the subforms. Most of the fields in the sub form are drop down boxes. Below is my code to hide and unhide the tables I would like to just add to this code so I can just pass it a variable to change the defaults of said table.
function check(tableId, ctrl){
document.getElementById(tableId).style.display = (ctrl.checked) ?
"":"none";
}
If I make no sense on what I am asking for I will try to explain more.
I've been trying to fix this.
Code below:
After a <div> has run its animation (.animate, left), How do I get it to *Reset* for its next trigger event?
View 2 Replies View RelatedI have a form with 40 radio button lists. Each radio button list contains 2 radio buttons = "OK" and "NA". The radio button lists are given ID's like "page1RB1", "page1RB2" etc. The radio button lists are assigned a class "rbOK". I am trying to reset all of the radio buttons to "OK" using the following code:
function clearChecklist(){
$('.rbOK').each(function(intIndex){
var theText = "#" + $(this).attr('id');
var theDL = theText.replace('RB', 'DL');
$(theText.replace('RB', 'CP')).css({'color':'maroon'});
$(theDL).css({'color':'gray'});
$(theDL).val(-1);
$(theDL).attr('disabled', 'disabled');
$(theText).css({'color':'black'});
$('input[name=' + theText + ']:eq(0)').attr('checked', 'checked');
});}
As an aside, I also have a drop down list and label associated with each radio button list using a similar naming/ID convention where RB is replaced with DL for the drop down list or CP for the label. That is, page1RB1 is associated with page1DL1 drop down and page1CP1 label. In this code, what I am trying to do is step through all radio button lists; read the radio button name/ID; use it to set the color and value of the drop down list and label and set Radio Button checked to OK. It is the last part that is not working. the above code handles the drop down list and label perfectly. But for the life of me, I can not get the radio buttons to reset to OK. When I click on the NA, they stay checked.
I have a textarea in a dialog and everytime I am resetting the textarea value before open the dialog.But on FF4 dialog value is not resetting. I checked the teaxtarea value from the Firebug and it is blank but still textarea conatins the previous value it had. If I reset the textarea from console the it works perfect.I didn't found any solution. At the end I am removing the textarea and re append it to the dialog when I am opening the dialog.
View 2 Replies View Relatedis it possible to reset the toggle function?
$(".element").toggle(function(){
// do something
}, function() {
[Code].....
I want to make 3 panel that functionally like we browse files in mac. I already suceed made 2 panel, the problem is, at the first load, the second panel already shown. I want it keep hide, until people clicked the button.
[URL]
This the complete script
<html>
<head>
<style type="text/css" media="screen">
[Code]....
I am still experimenting but I have a href which runs a function with a delay of 1 seconds, in that time; jQuery is also playing a 1 second animation. The new page is then loaded successfully. However, when I navigate with the browser Back button, how would I make sure that the initial page is reset to it's inital state as at the moment it appears as it would after the animation (which occurs when the href is clicked) has played.
View 1 Replies View Relatedwhen reloading a page containing some jquery code based variables (which are: a variety of datepickers with set dates, and a number of form textfields containing calculated and formatted monetary values) it appears that those variables remain set. If I set a variable on the page (in a form field) then refresh the page I would like for everything to be cleared out (start with a clean slate). I work around this by setting standard values to all those fields and datepickers manually, but I would rather avoid that and clear all variables/set values, rather than assigning a value to all those fields and datepickers manually to remove previous usage traces of the page. I want the refresh to behave like a full reload. I read somewhere that loading jquery with a variable at the end of the url string would achieve that. While I know how to o that, I would rather use just jquery and make sure cache / variables are cleared each time the page is loaded. My main reason for that is I'd like users to take advantagef of google APIs (so they use a cached jQuery version, for faster page loading).
an example of the page (with manual workaround in the code) can be seen at [URL] I work around the issue by using
$(function(){//clear all numbers on refresh or new pageload.
$("input.nbr").val("0,00");
});
I've created a drop down list as below:
<select name="declinereasons" id="declinereasons" onchange="declinereasonsChanged();" >
</select>
And on some event I call the following function to fill my drop down
function fillDeclineReasonList() {
$.getJSON('<%= ResolveUrl("~/myurl/")%>', function (data) {
ReasonCollections = data;
[code]....
Code...
How do I register a handler to the form reset event?
I have a photo gallery built with XML and PHP (pulling images from a client's Myspace albums).The gallery works fine, displays thumbnails and captions, paginates properly, etc.The whole thing is loaded by AJAX into a div, which complicates things a bit, but it works.When a visitor clicks a thumbnail, the full-sized image displays in a div overlay on top of the gallery div.The overlay is hidden until a thumbnail is clicked, when it is toggled to "visibility:visible". When the overlay "close" link is clicked, the overlay is hidden again.That also works. Some of the images are too large to display properly inside the div without throwing off the layout, so I had to set a max height and width.I can't just use CSS to set the dimensions or it'll size EVERY image to those dims, and the photos are all different sizes...some wider, some longer.So I used javascript to check the image size when the thumbnail is clicked.
All of that worked.(Although strangely, if I try to toggle the visibility as part of the function rather than putting it into the link, it doesn't work!)The problem is that once the dimensions of "img1" are set, they STAY that size even when the next thumbnail is clicked.So if the first image is 800px tall, the script crops it to 640px...then the next image may only be 400px pix tall but it displays as 640px high, making it distorted.I tried to add a "resetImgSize" function to the "close" link in the overlay, setting the img1 dimensions back to 2px x 2px when the overlay is closed, but the same thing happens...Once the img1 dimensions are set to 2x2px, they stay that way even when a new thumbnail is clicked.
I'm trying to get a endless loop going, for example for looping continually through a group of photos. So what I have is:
$(function(){
var ima = Array("johnny_100.jpg", "beau_400.jpg", "mofat_400.jpg");
$.each(ima, function(index, val){
[Code].....
so basically how could I reset the index, or maybe there is a better way to make an endless loop?
I'm using serialscroll jquery plugin from ariel Flesler on this page : http://goo.gl/HMNUX the width of the container (#slideshow) is 100% of the window's width. everything is fine until the user resize the window. Then the pictures are not in the right position anymore. should reset the "offset" setting of the plugin on resize. I tried this, but it doesn't work :
[Code]...
I'm using this sortable method: [URL] Works perfect! I have one question though: When a certain action is taken by the user, I want to reset the original order of the <li>s in the list. I can't seem to figure out how to do that.
View 3 Replies View Relatedhow can I reset the stars without clicking on the cancel button, like on any other event on the page? is it possible?
View 1 Replies View RelatedHow to reset an input field to its default value, which is depend on another. There is a way to clear the input field but not resetting to its default value.
Example
I have 2 radio buttons. Depends of the radio button selection some other input fields are required. Those things are already done using the click function. It clears the input field. But I need to reset to its default value.
I'm using jQuery form plugin, but i want when when user clicks on a button to submit the form using the traditional submit, how can i reset the form to traditional one ?
View 1 Replies View RelatedI am using jquery.validate.js file to validate an input form, It works fine, my problem is the error messages are not get cleared while clicking the reset button in the form.
how to get clear the form?
I have got a radio button group. A click event have to reset it that the first radio button is checked again.
<input type="radio" name="msgtype" value="1" checked="checked" /> Gruß
<input type="radio" name="msgtype" value="2" /> Wunsch
<input type="radio" name="msgtype" value="3" /> Frage
That doesn't work so far:
$('#cleaner').click(function(){
$("input[name='msgtype']").filter("[value='1']").attr("checked","checked");
});