Im trying to use jquery to try to do what the image shows: Its for a website made for iphone so im trying to add the slide effect. It all seems a little complicated, but ill explain: 1-The user clicks a link
2-A loading message (or image) appears Meanwhile, the new page loads on a hidden side (its a FULL page, not just a div)
[Code]...
Anyone loading a bunch of CSS or Javascript via <link> tags on a web page knows about "blocking": where the browser stops the loading of the page because it has to go fetch (and read/parse) an external file. If you have a lot of these, or even if you don't and the user has a slow connection, you have a slow page. Users hateses teh slow pages, hatses them.
At the 2010 Fronteers Conference, Stoyan Stefanov gave a talk on Progressive Downloads and Rendering, where he listed some tricks to get around blocking by Javascript or other external files to make page load speed up. One trick was adding a <script> tag in the body (near the bottom, so after the important stuff has loaded) which adds a <script> tag to the <head> dynamically and runs it. While that file is being fetched, the rest of the page can continue to load. This is a bit asynchronous, isn't it (similar to web pages still loading content while also fetching images)?
As a follow-up to his Higher Order Javascript article (see SitePoint thread about it), Piers Cawley has gone further with Asynchronous Streams, where he uses jQuery (as an example) to load external files asynchronously to avoid blocking of the HTML document loading. In my web development career I haven't worried about blocking, but plenty of folks around here are loading ginormous files, and lots of them, for large sites. As developers, what do you do to get around slow page loads? Have you done anything like this asynchronous calling of the external files?
How can i slide all page on loading? From right to the left? Is it possible with jquery or something else?
View 3 Replies View RelatedI have some trouble with my app. User enters his login&pass, they are being checked on server using ajax, and if they're ok, i wanna open new page, which'll set cookies and session vars, but i have an universal script, and I need request something like universalScript?mode=login (mode is GET) and some POST parameters such as login and pass, besides it must be new page, not ajax, Some ideas?
View 2 Replies View RelatedI've seen websites that had large flash ads that covered content on pages that, after they had run, resized or disappeared.
We would like to use the technology behind that (presumably JavaScript) to show and hide an intro flash on a home page. We would like to have a "close" link on the flash also.
I have searched Google and here but haven't found any good resources and many of the sites I have seen using the technology are no longer using them. I just need a little assistance on the JavaScript part of the puzzle.
We want the flash to start over the copy on the page and then roll out softly when it's done playing, revealing the content below. Code:
1.In ZZZ.html i have a long list of text items formated like this:
<div="part1">
<span > <h3 >AAA</h3><h4>BBB</h4></span>
<span > <h3 >CCC</h3><h4>DDD</h4></span>
[code]....
In another document i made some buttons to change slideshow content by loading sections id to
<div id="cyc" class="slide"></div>
using function:
$('#cyc').load("ZZZ.html #part1");
etc...
Text loaded, but the slideshow didn`t work
2.How can i loop specific range of slides ( and make it modifiable with some "range selector" in browser) ?
3.Is it possible to trigger some event on the desired slide number ?for example:
on slide 3 - play sound
on slide 6 - display message
on slide 15 - go through slides 10-15 four times
[code]....
I have a site that is very jQuery and image heavy. The main sections of the site link to sections that are built with several Tabs, and as it loads, you briefly see all the content load and then it is hidden by the Tabs code.
The plan is to have a full window DIV that sits above all the content with a loading icon that plays until the entire page loads, and then it fades down.
After some hair pulling and research I have code in place that does exactly as I ask, however it does not seem to work in IE6+7. It works in all other browsers.
The current code is:
CSS for the loading DIV is:
A working link is [url]
I'm having a little trouble with 2 differentJS scripts. I have a drop down slide menu and a parralex slide gallery. Both work on separate pages and puton the same page they still work however the submenu of the slide down menu does not. if I remove the style sheet that belongs to the gallery
Then the munu works, however (obviously) the page layout goes wrong. if i remove<h1 class="title">Alex Holland Perspective</h1> the menu works however page layout goes wrong andI loose my header
Here is the code.
I want to make a page which loads the div's with ajax The html code of the page is
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
//styles and other script code
<script language="javascript" src="../js/intro.js"></script>
</script>
[Code]....
Now the problem is that javascript "freezes" and setInterval does not work.. Is there any solution to load the files order such i have it in code one-by-one and run the message function?
I have a lot of javascript functions that request information from an iframe hidden on the page. I see other sites do this, but their browser does not do the loading action (like the processing circle in Firefox). When I do it on my site, each browser shows the loading icon, as if a page was loading. Is it possible to not have this?
http://bit.ly/cv1YqN
That is a sample link. Go down right side of page where you see three buttons: Trailers Featurettes Clips.Those return iframe information to work.
I'm having (once again) tremendous problems with IE (7), trying to create an application that behaves properly.
This time, it's with Ajax calls triggered by a button click, which do not behave asynchronously.
Here is the highlight of what I'm trying to achieve: a button clicked sends an ajax call to the server whilst the call is made and until the callback function has returned (or an error has been identified), a "wait" animation is triggered. (in the case below, simulated by appending a status in a div)
To achieve this, I decide to use .ajaxStart(), .ajaxStop() and .ajaxError() to trigger the wait animation. It works perfectly in FF and Chrome, but (as usual) not in IE. In IE, when I press the button, the button remains depressed until the ajax call is finished, and then all statuses are dumped at once onto screen. Not very asynchronous...
Here is my code:
If I uncomment line 11 and uncomment the alert, it seems that this forces IE to do things in the proper order. Obviously that's not a solution however...
Will I have to (once again) write IE-specific code to get things working properly?
I'm in the process of trying to shave off as much load time from my site as possible :) I notice that this takes a heck of a long time to load:
[Code]...
Is there a better way I can do this? Maybe using AJAX with ASynchronous? (like we're doing with GAnalytics on the site)
synchronous vs asynchronous $.post
may i know the difference?
Does anyone know if there are useful scripts in jQuery that allows me to create a page slide effect like this website?I think the logic behind it is that it loads every single web page of the entire website first, pans them out horizontally, then shifts the page left or right X amount of pixels depending on which link is clicked. I'm pretty new to javascript so I'm not sure where to look, and I don't understand half the code by looking at the source code either
View 1 Replies View RelatedI have a quick question for all you skilled developers -- I'm new to the forum, intermediate with JS/jQ.
How simple would it be to implement a subtle and quick slide-in of the page content using jQuery (only that once for the home page onload).
For a reference check out this site example. I wanted to do something nice like this WITHOUT FLASH =)
I'd like to process several blocks of parallel actions, but in a sequential manner.
As an example:
Thus, I want to process blocks, from which I don't know how long they will take and afterwards have a couple of actions, before beginning with another block. I already tried it through using .queue, .ready() etc, but that leads to very ugly or unusable code..
Can I do the following without my program crashing? [code]...
I have created an application that does something similar to the code I just posted. However, my program crashes intermittently. Sometimes it will crash after calling jQuery.get() a few times (with several http requests still pending). Other times it will get through all of them just fine.
I want to know if Ajax can handle that many asynchronous requests without crashing? Can someone look at this to see if there is something I am missing?
i want to make a iframe page that loading a page from other site. I have try "jQuery iFrame Sizing" to set auto height in iframe... but it is failed.
This is my code :
-------------
on Head
<script type="text/javascript" src="js/jquery.js"></script>
<script type="text/javascript" src="js/iframe.js"></script>
on Body
[Code]....
I want to slide an image or a page on page load..the below is an example
[URL]
I'm making a form with some fields. Once the form is submitted it updates the page with a new div containing the data entered without refreshing. Im using jquery form plugin. What I'd like to achieve is the new div(.record) to .slideDown. I guess I need to somehow specify the exact div by giving it an id or number. I'm not sure and why im here.
At the moment when i submit all of the divs(.record) are hidden with .hide, then they all slide down with .slide. Best i can understand is to hide the last div then slide down. But again.. I don't know how to specify to only slide down the last div added and not the current .record divs on the page.
[Code]...
I have the code for a javascript slider in my header. It is supposed to slide a menu out to the LEFT of the facebook icon at the top of my page. Unfortunately....this is not the case. Here are the 2 issues happening. I think they are both related to the javascript, but I do not know enough about it to fix it. [URL]
The attached pic shows what the alignment of the icons, is supposed to look like (my nav menu is pushed down a few pixels, as well). Here is what the sliding menu is supposed to do (top right menu in the white part of the page) [URL]
If this is synchronous, normal json request, I can capture the result (data) and return it to a calling function.
However jsonp is not synchronous. Whilst the data IS returned, and I can view it from within the success function, but I cannot access it after that.
$.ajax({
url: remote_url,
async: false,
cache: false,
[Code]....
I am building a library of functions which call this function, so I cannot have the data processing done within the success function, I need to extract the data itself.
I want to send another ajax request when one request is in process to get the status of first request.
If I call both the request the second request gets blocked till the completion of the first request.
Im looking for something that would allow a user to click on a button / link that would then reveal hidden content by sliding the whole of the main site content / container down.
I found this which slides the page content to the left or right [URL]
But need something vertical, almost as if the whole site was a big vertical accordian.
Or like on twitter / facebook phone app when refreshing for new tweets etc.
I'm using jQuery cycle plugin right now, and I want to add a new slide based on the newly created image and I want to replace this slide later if the user has updated the image. I read the document of jQuery cycle, and I found it's using onBefore callback to do the job, but it's not on the fly, how could I do it on the fly?
View 2 Replies View RelatedHow to insert and remove slide in jquery cycle before the first slide.
View 3 Replies View Related