When i press tab in my document which has editor it brings focus on editor iframe. Now if i again press tab then the focus goes to send button which is below the editor. But also cursor stays in editor.In such condition if i start typing, then as soon as press space my form is submitted as focus was on send button.
View 5 RepliesI have an editable Iframe control that I am using to allow users to
input formated text into a database for later viewing. One feature I
am toying with is the ability to vertically align their text. The idea
is to have a button for TOP, MIDDLE, and BOTTOM in which each will move
the text to the desired location within the box. So far I have tried
two ways to accomplish this. One is with a DIV around the text and
when the button is clicked it moves the DIV based on how high the DIV
has become. The other way I have attempted this is with a TABLE which
covers the entire iframe. When the buttons are clicked the appropriate
location is set in the cells valign property.
With the DIV attempt the body of the iframe has contentEditable turned
off and the DIV turned on. This would restrict the user from typing
outside of the DIV. The problem is that when the user clicks on the
iframe but outside of the DIV the cursor is gone. The user could also
hit ctrl-a on the keyboard to select all and eventually delete the DIV.
With the TABLE attempt the body of the iframe has contentEditable
turned on sice the TABLE seemed to not have that property. With the
body being off the table couldnt be edited. The problem here is that
the user can now type outside of the table and also delete the table
much easer than the DIV.
I'm creating my WYSIWYG html web editor. but now I want to know witch
image is selected. I try the selection.createRange().htmlText but it
returns me null. I see that when i have an image selected, the selecion
type returns me "Control", but how can i access the properties of this
control?
I have an iframe which is by default hidden. It becomes visible on a double click event and should be in editable mode. I set iframeObject.contentDocument.designMode='on' on body load event. But when i fire a double click event, iframe becomes visible but not in editable mode. How to achieve this specially for firefox2.Any other alternative, let me know. In IE its working fine. Also i want to know how to set textarea value to an iframe
View 1 Replies View Relatededitor.document.execCommand("insertHTML", false, "<br />") doesnt work when the text cursor is at the end of a sentence... but is does work when the cursor is at the middle of a sentence.
<script type="text/javascript">
window.onload = edit;
function edit() {
[code]....
I'm trying to get the cursor position to move to the end of the text within an editable iframe or div.I've been pointed to something called TextRange and have been reading up on it for days yet couldnt make sense of much (i'm still very new).what i'm trying to do is on a button click, the cursor will move to the end of the text in the iframe.
View 3 Replies View RelatedI have several issues with my multilevel drop down menu The First issue is : the page has 2 iframes (one has the horizontal multilevel drop down menu on the top) the below iframe has my site address Now, when i hover over the menu it does not open or expand but when i open just the menu without any iframes it does This clearly means that the menu is not coming out of the iframe bring it on top of everything of the page Note: i have placed the menu in one iframe and a page opens below it in another iframe. The Second issue is : I want the navigation bar that is the multilevel drop down menu to be editable Which means i have a blog and a forum on my site but my visitor wants that the blog should not appear there and another link to play games should
be there and hence he/she can edit it And please also try to make it work on cookies so that the user info and preferences are saved in cookies and whenever he/she comes back they see the page their way. For you: I would like to tell you that IdeaLab has launched a Twitter Advertising, Widget and Search platform and the first 1000 people are getting $100 go to tweetup.com
I'm trying to implement is a table with editable rows and columns that will feed back into a database. If I could do it with AJAX that would be great too, but I'm not too familiar with javascript. I don't need the code, I need more of an idea. The HTML Table is currently a recreation of the MySQL table minus a few columns. Its all in text, but if I could make the text editable, or better yet, make the text turn into input boxes it would be really cool. I'm not really sure what kind of methods and properties I would need, or quite how to put it all together. What do you think is the best way to go about the entire project?
View 8 Replies View RelatedI was hoping to get some insight on my problem. Please be patient, as I am new to this.
I have two iframes, "menu" and "register". When a menu item is chosen, the "register" iframe loads up the necessary jsp. However, I can't seem to access any of the links in the "register" iframe - these links are simply displayed as text.
Is there any way to redirect focus to my "register" iframe so that I can access its links?
I've tried stuff like:
top.frames.register.document.all.elementID[0].focus();
top.frames.register.document.focus();
top.frames.info.document.menuItem0.focus(); // where <td id="menuItem0"> ... etc.
How do I focus() to a form-field, from a iframe - to its parent frame?
View 2 Replies View RelatedI have an intranet page which has an iframe which links to a number of
different possible .NET pages.
In one of the embedded .NET pages (and soon to be others) we want to be
able to capture keystrokes in order to link to other apps. we do this
by setting document.onkeydown to a function which handles the various
possibilities.
The problem I have is that when the intranet page loads with my .NET
page in its iframe, focus is not given to the .NET page, and so in
order for the page to capture keystrokes you have to click on the
contents of the iframe, which is both clunky and (it seems to me)
unnecessary.
How do I automatically give focus to the contents of the iframe when it
loads up? I've tried putting the following script at the bottom of the
intranet page itself, but this doesn't seem to work:
I'm working on a site that uses an iframe to load cross domain sites.The problem is that some sites use javascript to say put focus into an input field.I have managed to prevent this by using setInterval that continuously gives focus to an input on my page but this causes the problem of not being able to click into the location bar.So basically, is it possible to to only regain focus when an element inside of the iframe takes focus? Or even just solving the location bar problem with my current solution would also work. (And I have tried things such as applying onfocus events to the iframe element - but they simply don't work because it's not the iframe that's gaining focus, but elements inside of it)
View 2 Replies View RelatedI have this page below which I run locally that is created dynamically: [URL]
I need a piece of javascript to focus on the captcha as shown in the image inside the green box. At this minute I have this which doesn't work all that great for some reason but it gets it to the general area...
if (( document.URL.indexOf("cast_skills") != -1 ) || ( document.URL.indexOf("security_prompt") != -1 ) || ( document.URL.indexOf("joinraid") != -1 )){
if ( document.forms.length > 0 ) {
document.forms[0].elements[1].focus();
}
}
As I said this does the job to some extent however it does not leave the focus in a perfect position so that the captcha is readable and the text box visible to type in, as illustrated in the red box in the above image.
have facing a problem with .toggle()i have a requirement that when i click a button a row will be editable when i click it again the row will not be editable.when i use .toggle with alert, the first time it shows the first alert. when i click it a second time it shows alert 2. when i press ok on alert 2, alert 1 fires. how do i stop this?
View 3 Replies View RelatedI have the following HTML:
<div class="Field">
<input type="text" name="phone" />
</div>
To blur the div when the input has focus I have the following:
$('form :input').focus(function() {
$(this).closest('div.Field').addClass('Hover');
}).
[code]....
The problem is that now I have a div.Field with TinyMce so an iframe inside it.Something like:
<div class="Field">
<iframe>
<html>
[code]....
I need to blur the div when the mouse "focus" the iframe body.And of course blur out when it doesn't.How can I add thisfunctionalityto my code?I tried a few changes but none of them worked.
I'm currently making a web application which needs to be fully compatible with iPad. The functions I've implemented so far work perfectly on Firefox, Internet Explorer and other browsers. However, the iPad itself responds a bit different. After a certain action, I want to put focus on a textfield with the help of Javascript. Again, this works perfectly with the normal browser, the iPad browser however seems to be blocking the focus. The reason I'm not posting any code is because it's basically irrelevant. All I do is:
[Code]...
Is there a reason why setting focus to a textbox input, also gives
focus to a submit button on the page, to where if you click enter in
the text box, the submit button will be clicked.
The default behaviour of focus() method is displaying the cursor at start of the char(In FF focusOffset is 0(zero) and anchorOffset is 0(zero)). I need to display the focus at end of char after calling focus() method.
View 5 Replies View RelatedI think the problem is cause by my lack of understanding of how the browser (firefox 3.6.3) handles focus.A simplified version of my problem is:I've defined the function
function two_focus()
{
document.getElementById("two").blur();
[code]....
The code below calculates Total = (Quantity_01)*10.00 + (Quantity_02)*5.00, and displays the Total in a TextBox called "result": document.myForm.result.value = Total.toFixed(2);
I don't want and don't need "result" (Total) to be an editable input TextBox, like it is now. I would like it to be something like a label, non-editable. I played around with "writeln" and <LABEL> but actually I don't know how to combine them with document.myForm.result.value = Total.toFixed(2);.
I just want the Total not to be editable. Code:
i have some mysql articles and i would like to change the title when it displayed on the page by clicking on the h3 tag i have got the articles displaying on a while loop so i need something that would work with that i was thing of somehow changing the h3 tag to a input tag
View 3 Replies View RelatedI've got this prototype funtion
function makeEditable(id){
Event.observe(id, 'click', function(){edit($(id))}, false);
Event.observe(id, 'mouseover', function(){showAsEditable($(id))}, false);
Event.observe(id, 'mouseout', function(){showAsEditable($(id), true)}, false);
}
that make editable a <p id=xxx> with an speial id I want to modify it to makeditable any of <p> with that id if it's been clicked and also i use this function on a button how I can avoid this function from multiple executing by multiple clicking by user?
Is there any way to make a combo box(drop down list) in the HTML screen editable?
Like when i select an item in the combo box, a text box should appear in the place of combo with the item selected and once i am over with the editing the combo should reappear with the new value. I should also be able to add to new items to the combo box.
is there a way to make a layer content editable like in ie? suggestions?
View 3 Replies View RelatedHow to Editable the combo box using with Javasscript.
View 2 Replies View RelatedI am not sure this belongs in the JavaScript section so apologies if it doesn't.
I want to be able to open a link in a new window, but make sure the users are not able to modify the URL.
Is that possible?