I use a bunch of overlapping divs. They operate as pop ups i.e. user clicks button, calls function to show div, it also hides any other divs that might have been open previously i.e. only one div open at one time i.e sample code:
i.e. I thought that if I put the pop divs in another container i.e. another div, then told the container div to hide, then all the embeded divs will also be hidden. This did not seem to work
I'm working on a website where I need some help with open and closing divs using javascript.
This is the website: [url]
As you can see I'm using a javascript to open each jeans style link, I don't know if this is the best way to do it, but it's how I've done it so far. If you click the "Frankie style link" at the bottom the div called Frankie will show and you will see a little image in that div that says "next wash". What I would like this link to do is to close the frankie div and open up another wich looks almost the same as the previous, the only thing that will change is the pictures actually.
I've got a div that slides out from the left of the screen when the page loads but I can't figure out to get it slide back when another navigation button is clicked. The navigation has several buttons so clicking on any of them would make current div to slide back out of site.
I am building a large registration form. In this form, a sponsor/educator must register himself or herself and then may add up to 6 more " delegates" in pairs. The first two pairs registration info on the form is shown by default. I need to hide the other two pairs until when/if the user clicks on a button to add two more delegates at a time. I used javascript to show or hide the parts of the form that I had put into two divs and adjusted the css display attribute. However, my problem was that, if the user filled out the sponsor/educator section and the first two delegates, and then decided to add two more, when the user clicked on the button to show the part of the form for delegates 3 and 4, it reset all the previous visible form fields to empty. Not good. So, I thought, maybe AJAX.
I created the request object (I am a relative novice at AJAX), had it grab a text file with the code to insert into my target div, in this case a div with id = "delegate3and4". Surprisingly however, it still reset the previous form fields to empty. Am I misunderstanding how AJAX is supposed to work? I figured that, because it does not refresh the page that this would not happen. In fact, to test this out, I created a simple page from scratch with just a single input field and then used AJAX to insert the file in a div after this field and it did not reset the previous input. So, I am totally confused about why this would be happening on my live page. The page is a php page as it submits the form to a php script for processing but I don't think this should make a difference.
I have five divs that I want to work kind of like an accordion, but you can open multiple sections. Right now, when user clicks any link, it opens all five sections. And when you click to close, it closes all five. I want to be able to open one section, then go to the next and so on.
I have a element when click, it will trigger some other elements to be selected. and those elements will trigger elements in next level.
It is a three levels hierarchy so to speak. but each element will send an ajax request when selected. Those requests will become out of control especially when I repeatedly click the root element.
Can I queue those XHR request in a queue and send them one by one? or maybe add a delay before send so that they can collect their information into one batch request and send one request after that.
I am looking for a way to simplify a large series of �object definitions� in the form:
var Img0 ={init:function(){Img0.div = document.getElementById("img0"); Img1.init();}}; var Img1 ={init:function(){Img1.div = document.getElementById("img1"); Img2.init();}};
[Code]....
The program I have developed (for animated greeting cards) works fine but for a large number of images there are an equal number of these object definitions. I am aware of such techniques as using �+i+� in place of the numbers 0, 1, 2, ... and assigning an increasing value to i in a loop. However, I do not see a way to use such a loop here.
The standard Number.toString() method returns values in scientific notation once they exceed 10^20. In many cases, this is not an expected or desired result.
The toLongString() method provides a solution by always returning a literal numeric value regardless of the number's size. However, the value returned will not be accurate beyond the first [log base (radix) of (10^15)] digits.
radix: Optional. A number between 2 and 36, inclusive.Number.prototype.toLongString = function(){ var radix, n = this, d, t = '', p = '' if(arguments.length>0 && typeof(arguments[0])=='number'){ radix = Math.round(arguments[0]); if(radix<2) radix = 2; if(radix>36) radix = 36; } else { radix = 10; } if(n < 0){ n *= -1; p = '-' } while(n > radix){ d = n % radix; n = (n-d)/radix; t = d.toString(radix) + t; } return p + n.toString(radix) + t; }
Does the detach method work recursively? Say I have a div with a considerable number of elements, sub divs, etc and many of these elements have listeners, will detach preserve all of these elements or just the listeners on the parent?
I have a starting page, Page1.php that uses Page1.js.In Page1.js, I'm using the onclick event for a button that's on that page. When the button is clicked, it goes to Page2.php. Okay, fine.Page2.php is using Page2.js. But when the browser switches to page 2, I get a javascript error because, somehow, it's still referencing the Page1.js file. (Using IE8)So how do I 'dereference' the first javascript file, so that when Page2 loads, it doesn't still try to instantiate the objects in Page1.js? (I'm getting a null object error when Page2.php loads).
I am using javascript to switch between a series of divs, on clicking a navigation tab the divs display property is set to 'block' and all other divs have their display property set to 'none'. That works fine, the problem I have is when I redirect to another page (e.g. a PHP script) on return to the index the divs have reset and only the default div is shown, rather than the div that was showing when the user left the page. The solution, as I see it, is two stages: Write a function to display the relevant div based on the variable passed to it, then work out how to pass this variable around various pages (post/get). I am very inexperienced with javascript and it drives me mad that the script literally does nothing rather than throwing up an error (as in PHP) but this is what I have so far in terms of a function:
I have been trying to do some tooltips for a website and desperately wanted to learn something new and do that with jQuery.However, every time a mouse hovers over a tooltip, all hidden divs are shown, not just the one that supposed to. Here's my html:
I'm looking for some javascript to work with wordpress (jQuery preferrably) that will show/hide multiple divs on one click.
I had one working but it was kinda janky because it was causing me to have two divs with the same ID on one page. No good.
Since I updated to wp2.8.3 prior to launch, it's not working. So I've decided to just try and do it right.
Here's a page: [URL]
So, what I want to happen: On page load, the first tab: "general" and it's corresponding div beneath should be showing. And the first image should be showing. The other content divs and images should be hidden. I've given the text content divs a dashed border to show their borders. When a visitor clicks "dine at home" the general div and image hide, the second content div shows, as does the second image (it's currently the identical image, but the client may change later.) Etc.
I'll be using this function on a few other pages as well.
how to adjust this javascript to work on two different IDs at once?
I have this script that is supposed to check if a number the user guesses is the same as the randomly generated number.Problem is that the random number generated at the start of the program keeps on changing everytime I click on the "Check if I'm right" button, the random number gets generated again and I never ever get to reach the correct answer
HTML CODE <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head>
Hello everyone... I've got a question about an onKeyUp event. I'm using a text box that HAS to be a negative number therefore it has to have a - sign in front of the number. Can someone point me in the right direction as to how to write a function to do this? Thanks so much...
I am working on trying to create a Picture Bingo JavaScript. I am using the standard Bingo Card Generator and it works great however, I need help coding the script so that the number are associated with a picture for example everytime number 12 would show up on the card an image would replace the number. Here is the code that I am using:
When updating our agency's webpage daily, [URL] I am looking for a shortcut to save time.. When I update air quality numbers. I have to put the conditions. Ex.. 50 = good 100= moderate etc etc. As you see here(bold and underlined)
[Code]...
Well instead of having to type good or moderate every-time to correlate with the numbers, I want to find a way the category can automatically default correctly when I put in just the number. Ex, if I put in the number 100, it automatically knows to issue/ put Moderate with out me having to type it. I semi wrote a code .. Yet can't seem to know how to execute. Seeing if Maybe I can get some assistance.
I have a function below where every time a question is submitted, it will add a new row in the table with a textbox which allows numbers entry only. My question is that I don't know how to code these features in this function:
I want the text box to be between 0 and 100, so if text box contains a number which is above 100, it will automatically change the number to the maximum number which is 100.
Does any one know how to code this in my function below in javascript:
When I used toFixed() method on a number, I thought that this method round a number to a specified approximation, but I got a surprising result, the number became string! 15.23689.toFixed(2) ==> "15.24". So does it convert the number into string?
I am trying to figure out how to make a random number I can plug into a script count down from that number at certain times of the day until it reaches 0. I would like it to reset itself at midnight every day. I'm trying to make it work with a script I found on here that resets itself at midnight every day. So instead of it counting down too fast, it would count down to the next number after a randomly generated number of minutes until it reaches 0. But it wouldn't necessarily have to end at 0 at midnight. It could go from 845 to 323 at the end of the day at a slower pace. Is that possible?
Hello, I have a very large function that activates on one click. It does many individual events that modify my site. They all work seperately but when I put them in a single function they all break. Is there a way, order or priority for putting large things of code in functions?
Here's the situation: I have a simple php file which retrieves data from a mysql database and displays it in a table. However, the number of records has gotten so large that retrieving all the data takes a lot of memory and the browser freezes.
I been googling for a solution and some1 mentioned something called live scrolling where the data is retrieved only when you scroll up or down. Since am just an amateur and not familiar with XML, XSL, etc; can any1 recommend some link where i could find some JS script with such a feature? one that's easy to get started with if possible...
I would like to calculate factorial numbers that produce results of say 100 digits. What is the best way of doing it in Javascript? Can I define a variable and somehow have control on each of its digits individually?
Can I multiply two relatively small numbers and determine that there was a carry?
I have this large string mixed in with PHP because the drop downs offer a query from the users already uploaded. Anyways, somewhere there is an error inside the string, probably because the single quotes cancel each other - but I can't seem to combine them to fix it. Let me know if you see anything, or have tips.
var inner = '<colgroup><col span="1" width="250" /><col span="1" width="200" /></colgroup><tr><td class="leftAlign">Letter of Recommendation</td><td><? if(mysql_num_rows($f) != 0) {echo '<select name="recommendation_archive">';include "includes/objects/files_drpDwn.php";echo '</select>';}else { echo 'No files in archives.'; }?></td><td><input name="recommendation_upload" type="file"
I have an issue where I have a background image wrapped within an A tag and upon hover I want a different image displayed which is a few pixels larger.This is for an intranet so needs to be IE6 compatible
