I am using a Toggle function right now that does a getElementByID check. I have a table dynamically being built by ColdFusion that shows a bunch of time entries for a support ticket. Each time entry has 3 rows that I only want to show if the first row is clicked. Right now it only displays the first of the three.
[Code]...
I have 3 checkboxes from which I wish to toggle one div.
condition
1. IF any checkbox is checked, div should show
2. if all checkboxes are unchecked only then the div should hide.
I've got two sections of my page that I want to remain in sync as they cycle. I think I'm 95% of the way there, but I just can't quite get it to work. The #slideshow cycle works perfectly, as does the pager, but the #descriptions cycle behaves oddly. It hasn't been completely consistent, but usually it'll cycle after the 2nd slide, then never cycle again. This is the case whether or not I click the pager to #2 then back to #1 or if I just let it cycle.
[Code]...
I've been stumped. I'm usually good at figuring this stuff out, but I'm completely confounded here.I have a form with tables in it to add items to a series. The rows are being added dynamically by Jquery on the click event.
$('#add_hybrid').click(function(){
$('#hybrid tr:last').after('<tr><td width="15%"><?=brands('hybrid');?><input name="clubtypes[]" value="6" type="hidden" /></td><td width="25%"><?
[code]....
Is it possible to do so?
View 2 Replies View RelatedI know it involved naming the html form inputs as col001row001, though. Doing that dynamically in asp is no problem, but how do I get the row number to be recognized inside javascript's "document.form.column###.value" while going through a for loop?
View 4 Replies View RelatedI have a set of data that I display in a table. Each row has a category
and there may be a dozen or more rows in the same category. I'm looking
to add filter buttons to the page to hide/show categories on the fly.
Currently I can: Set the id on the tr to (category name) or to (category
name.data id).
Using the first, is there a way to hide all rows with that same id? It
seems currently to only hide the first row with that id.
If not, is there an easy way to find all rows whose id starts with
(category name)? I figure I could regex over every element in the page
looking for ones that begin with a particular id, but that would be
silly.
Also, is there a way to refer to every row of a table? I'd like to first
hide every row, then show those in the required category.
I'm a newbie to jQuery and I'm facing a "big" problem for my actual knowledge.. code...
If I run the code and click on "Delete" what I can obtain is only a partial remove of fields (the "Label4" and "Label5" still remains on the screen, all the others are removed)... but what I really need is a complete remove all of the "two" rows... I did many search on the forum but I wasn't able to find an answer .
Can someone provide me with the javascript code for deleting multiple rows..i.e..User will be selecting certain rows with checkbox and on clicking on the delete button,those checked rows should be deleted..I want it in Javascript and not Ajax.
View 13 Replies View RelatedUsing the following code , I'm trying to delete 2 rows from a table , the first row deletes ok but then I get the error
When trying to do the delete the table contains about 10 rows , I'm trying to delete row 3 , and then row 3 again
displayTbl has no properties
Any ideas..
var displayTbl = parent.expenseDisplay.document.getElementById('expenseDisplayTable');
displayTbl = displayTbl.deleteRow(lineNo);
displayTbl = displayTbl.deleteRow(lineNo);
I have taken from internet a script that adds and removes rows but I made a little changes to that script that is renumbering rows after deleting. I can delete all rows by selecting at once except firts row. For ex. I have added 10 rows and I chose 9-th of them I delete them with no problem. but when I choose the first row it deletes one by one and displays error. If possible Why the error displays when choosing first row (no matter only first row or all rows with the first row also). My script is below:
<HTML>
<HEAD>
<TITLE> Add/Remove dynamic rows in HTML table </TITLE>
<SCRIPT language="javascript">
var rowCount = 0;
function addRow(tableID) {
rowCount++;
var table = document.getElementById(tableID);
var z=table.rows.length;
if(rowCount>z)
rowCount=z;
var row = table.insertRow(rowCount); .....
I'm trying to make a table that will hide multiple rows in single js functions... now I put together a way to do it, but it requires multiple id declarations in the functions, is there any way to do it with classes instead of IDs, so that I can have a blanket class that I can use?See:
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">[code]......
I am using a Toggle function right now that does a getElementByID check. I have a table dynamically being built by ColdFusion that shows a bunch of time entries for a support ticket. Each time entry has 3 rows that I only want to show if the first row is clicked. Right now it only displays the first of the three.
Code:
<script language="JavaScript">
function toggle(divid) {
[code]....
The following works if the row that i want to display has one class. But if it has two classes this don't work.
For example this works
Code:
And this don't since it has two classes. How can i have two classes on a tag and still chose wich one i want to use when i want to show them or not??
Code:
Code:
I'm trying to work my way up to being a novice in Javascript but I'm not there quite yet.
My problem is that I want to create a form in which multiple form fields can be duplicated/deleted upon clicking a button. I have some javascript here that does exactly that, but it will only do it for one table row. This creates a problem since the form I want to duplicate would contain multiple rows.
I've tried containing everything in a nested table within the duplicatable row. That actually works, but it disables the delete function. Same goes for using a div.
Here's the javascript:
Code:
And here's the html:
Code:
I have a table that contains many rows, some in italian with code <td nome='riga_i'>. and some in english with code <td name='row_e'>. I have created two buttons with different background flags: italy and uk, so when one pushes the button with flag uk, the html page will be reloaded with only english rows, and when one pushes the button with flag it, the same page is reloaded containing only italian rows. All the code posted here works well, but I think that the code can be better because to reach this result I had to dupplicate the same function and I don' t like this.
Here the code:
To better the code I have tried in this way but without success ...
Trying to display events on my website based on what my clients want to view. I have 3 checkboxes setup to toggle the connected events, but I can't seem to make the onclick handle more than 1 event at a time.
Basically, I want to know
1) how to display more than one tr row'd event with the selection of any given checkbox.
2) how to have all boxes checked on the page load (checked=true only checks the box with no info showing)
3) AND/OR how to create a CHECK ALL option
4) and, lastly, how to give it a scroll in case I have many events code...
I will have a page with about a 100 or so different links and I would like each one to toggle the visibility of its corresponding hidden div.For instance, if I have a county 'Johnson' when it's clicked I would like the hidden div associated with that county to become visible. I would like to do this without having to write a different function for each one. Is there a way to do this easily?
Below is a solution I was given elsewhere but I couldn't get it to work.Most ideal of all I would like it to work with an image map, with each county having it's own set of stats to be toggled in.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>[code].....
I have some jQuery code to add and remove a class to toggle an image. It works for one but now I want it to work if I add other checkboxes. Currently all the checkboxes change the 1st div. I would like to make it toggle it's respective div.
<html>
<head>
<title>jquery to Show/Hide a Div</title>
<script type="text/javascript" src="[URL]"></script>
<script type="text/javascript">
$(document).ready(function(){
$("input").removeAttr("checked");
$("input").click(function(){ .....
I have some jQuery code to add and remove a class to toggle an image. It works for one but now I want it to work if I add other checkboxes. Currently all the checkboxes change the 1st div. I would like to make it toggle it's respective div.
<html>
<head>
<title>jquery to Show/Hide a Div</title>
<script type="text/javascript" src="http://code.jquery.com/jquery-1.4.1.min.js"></script>
[Code].....
I am trying to toggle multiple divs toggle open/closed show/hide with a slide left effect It works but is buggy if you click too fast [URL] I want to create this but control to content in the sliding divs [URL]
View 1 Replies View RelatedTrying to get this to work individually with each individual instance on the page (usually 5-10 questions on each page)Right now it adds the class to every instance of the div that has the answerCorrect class. need the link to only turn on the specific answer associated with it.
<script type="text/javascript">
$(document).ready(function(){
$(".showAnswer").click(function(){
[code]....
On the homepage of my site, I would like to have some nav links that toggle between a few divs that are below in the content The divs in the content should display one at a time. For example, if you click nav1, the user would see div1. If nav2 is then clicked, div1 would hide and div2 would display.
I have some code that will do this, but for some reason it is hiding any divs that are within the toggled div. I'm very basic with JS and could use some help here. Here is my code:
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3/jquery.min.js"></script>
<script type="text/javascript">
function toggleID(IDS) {
var area = document.getElementById('secondContent');
var sel = area.getElementsByTagName('div');
[Code]...
I'm looking for a lightweight way to be able to switch between 2 divs on a page.
I have found various ways to do this online with jQuery, but none of which are able to handle multiple switches and make it extendable across the pages of my website efficiently.
For example I could have 12 - 15 individual elements on a page (All with same style) each with an option to switch content e.g. "Click here to do something" then once clicked "it would reveal something" (Within that element/<li> tag) - so it's element specific.
For example:
Code:
<ul>
<li class="box>
Title
[Code]....
But of course as it's element specific you have to associate each id together but you can't have two id="2" - as that won't validate.....
Looking around, a perfect example can be seen at: [URL]
And because it's CMS driven and will have multiple categories/pages, you can't list all the id's with the javascript, so it has to be portable/OOP (Is that the word?) so just a main identifier in the JS...??
Where you click to reveal code and it switches div, but only for that element, it doesn't effect anything else.
Im trying to toggle a block of info on a forum that gets displayed multiple times. The below works for just one ID but I'll have more then one.
Code:
function toggle() {
var ele = document.getElementById("toggleUserinfo");
var text = document.getElementById("displayUserinfo");
if(ele.style.display == "block") {
[Code]..
I am trying to make a multiple checkbox filter. It works by selecting/unselecting checkboxes the divs with classes revered to the checkboxes will activate deactivate.
This is the javascript I founded on the net:
Code:
<script type="text/javascript">
$(document).ready(function(){
$("#events li."+$("input.type_check").attr('id')).addClass('type_hidden');
$("#events li."+$("input.type_check").attr('id')).slideUp();
$("#events li."+$("input.start_check").attr('id')).addClass('type_hidden');
$("#events li."+$("input.start_check").attr('id')).slideUp();
$("#events li."+$("input.place_check").attr('id')).addClass('type_hidden');
$("#events li."+$("input.place_check").attr('id')).slideUp(); .....
To see it working online look here: [URl]
There two problems. I want to replace the sliding effect. I want to make a table with the divs in it. And when a div is deactivated the text or image shows grey and the link is disabled and when activated the text/image shows black/color and the link is enabled. So when you uncheck/check the boxes the divs will toggle between the two styles clickable and unclickable. I also want to make a second checkbox/radio row with different css styles to choose from. When a style is selected and you click on a link in div it will send you to the page with the selected style.