I'm trying to work my way up to being a novice in Javascript but I'm not there quite yet.
My problem is that I want to create a form in which multiple form fields can be duplicated/deleted upon clicking a button. I have some javascript here that does exactly that, but it will only do it for one table row. This creates a problem since the form I want to duplicate would contain multiple rows.
I've tried containing everything in a nested table within the duplicatable row. That actually works, but it disables the delete function. Same goes for using a div.
I have a set of data that I display in a table. Each row has a category and there may be a dozen or more rows in the same category. I'm looking to add filter buttons to the page to hide/show categories on the fly.
Currently I can: Set the id on the tr to (category name) or to (category name.data id).
Using the first, is there a way to hide all rows with that same id? It seems currently to only hide the first row with that id.
If not, is there an easy way to find all rows whose id starts with (category name)? I figure I could regex over every element in the page looking for ones that begin with a particular id, but that would be silly.
Also, is there a way to refer to every row of a table? I'd like to first hide every row, then show those in the required category.
I'm a newbie to jQuery and I'm facing a "big" problem for my actual knowledge.. code...
If I run the code and click on "Delete" what I can obtain is only a partial remove of fields (the "Label4" and "Label5" still remains on the screen, all the others are removed)... but what I really need is a complete remove all of the "two" rows... I did many search on the forum but I wasn't able to find an answer .
Using the following code , I'm trying to delete 2 rows from a table , the first row deletes ok but then I get the error When trying to do the delete the table contains about 10 rows , I'm trying to delete row 3 , and then row 3 again
displayTbl has no properties
Any ideas..
var displayTbl = parent.expenseDisplay.document.getElementById('expenseDisplayTable');
I am using a Toggle function right now that does a getElementByID check. I have a table dynamically being built by ColdFusion that shows a bunch of time entries for a support ticket. Each time entry has 3 rows that I only want to show if the first row is clicked. Right now it only displays the first of the three.
Code: <script language="JavaScript"> function toggle(divid) {
I have a table that contains many rows, some in italian with code <td nome='riga_i'>. and some in english with code <td name='row_e'>. I have created two buttons with different background flags: italy and uk, so when one pushes the button with flag uk, the html page will be reloaded with only english rows, and when one pushes the button with flag it, the same page is reloaded containing only italian rows. All the code posted here works well, but I think that the code can be better because to reach this result I had to dupplicate the same function and I don' t like this.
Here the code:
To better the code I have tried in this way but without success ...
With my very limited knowledge of both jQuery and JS i made a small script (with a little help) that duplicates a tablerow when a button is clicked. This works like a charm, however, i would like to add a datepicker to it. This also works well, but just once and not on the copied fields or visa versa. It's probably because the datepicker "thinks" there is just one field.I found several sources to solve the problem, but again, with my newbie knowledge, it's just to hard. I am playing with this for almost two days and can't get it solved.
I have a table that contains many rows, some in italian with code <td nome='riga_i'> and some in english with code <td name='row_e'>. I have created two buttons with different background flags: italy and uk, so when one pushes the button with flag uk, the html page will be reloaded with only english rows, and when one pushes the button with flag it, the same page is reloaded containing only italian rows. All the code posted here works well, but I think that the code can be better because to reach this result I had to dupplicate the same function and I don' t like this.
Here the code:
To better the code I have tried in this way but without success ...
I know it involved naming the html form inputs as col001row001, though. Doing that dynamically in asp is no problem, but how do I get the row number to be recognized inside javascript's "document.form.column###.value" while going through a for loop?
I am really struggling with a little bit of javascript I am working on. I know the solution with a bit of javascript is simple but unfortunately I am no javascript wizard.I have a form that will initially contain 1 table row with 3 form elements (2 text boxes and one dropdown select). The form tags are wrapped around the table. What I want to do is use a form button to add new rows on demand. So if the button (labeled with a +) was clicked a new row would be added with the same 3 form elements listed above but with a new name for the element (1,2,3 so on..). Each time the + was clicked a new row would appear. I know this is probably simple but just can't seem to find any examples anywhere on this entire world wide web
i'm creating a ASP page, which is going to have a form in it that needs filling out. part of the form will be a table with a header row, then the next rows will have text boxes that need filling out. is there a way of putting in a dropdown box that contatins numbers that will dynamically show the rows. for example if i select 5, then five rows of text boxes will appear. if i select 14 then 14 appear.
I have some JQuery that makes an Ajax call and then adds some rows to an existing table.
function LoadDestinationTable() { $("#destinationTable tr:gt(0)"[code]...
The problem is that the only place where the click event fires is on the rows that were added when the page was 1st rendered – the th, for example.I also tried adding an onclick event handler to the input button’s creation – that also does not fire.
I have a need to select all table rows in the outer table of a cascading table structure, that is a table with contained tables. I tried to use the "Context" section of jQuery, but the table rows of the sub tables are being selected as well.
I've been stumped. I'm usually good at figuring this stuff out, but I'm completely confounded here.I have a form with tables in it to add items to a series. The rows are being added dynamically by Jquery on the click event.
I have a site with 2 side by side tables with matching data. The left table is a drag-n-drop implementation so you can reorder the values in the database just by dragging and dropping. It works wonderfully. I want the right table to reflect the changes instantaneously. I got the right table to reload itself with the following jquery line:
I have a dynamic HTML table which gets populated by coldfusion and displayed in the page, I have a column called performace which holds numeric values. I need to select the top 3 best performace value in the column and then highlight the entire row in different colours (top 3 values for performance). Can any one help me in doing it?My server can run only Javascript and coldfusion, No Ajax/PHP.I need a complete set of code which such that I will add the script and it performs the calculating and highlighting part.
I'm new to this forum and also to Javascript. I've modified some script to add a browse button when "Add More" has been clicked.I was hoping someone may know how I can duplicate the entire row so that the two drop-down lists are also duplicated, in addition to the browse button
What I am trying to accomplish is this, I have 4 radio buttons with something different on each. Now depending on what is selected, a table shows with maybe 10 items (its very random really, could be 5, could be 50, but probably more like 20 at most), anyways. I was thinking just delete all the rows, and just recreate the table... but now after thinking about it, just make the tables invisible, and visible depending on what is selected... which is suggested, and could anyone give me hints, or show me how I would be able to accomplish this?
I'm getting an error in displayDirectors() on the line shown. What I want to do is hide the rows in the table where rs_Board("DirStatus") = "Retired" with hideDirectors() and show all records with showDirectors(). What I did was create a column with a checkbox which is not visible to the user and check this box when rs_Board("DirStatus") = "Retired" and leave it unchecked when it doesn't. There's probably a better way of doing this. I also want the text in <span id="DirectorsCaption"> to change with each function but I'm pretty sure this will work when the other error is debugged. Code:
I write a simple javascript to expand / collapse some rows of a table. The problem is that when I click more than one time the link to expand /collapse the rows I get an unwanted extra space after such rows. Code:
