With a javascript timer to delay the loading of the main container div on a website.
The reason is that I would like the background image (560k) to load first and then the site to load after. I found the opposite of what I need;
I am looking for either a JavaScript or Coldfusion solution to the following problem. First, there are over 60 million product photos so downloading and resizing the photos using Coldfusion would be very tedious.
I would like the display an image within a 100 x 100 pixel container.
If the height or width of the image is great than 100 pixels, the image should reduce in size to fit within the 100 x 100 pixel container.
I want to avoid pixelation of the images as much as possible.
All images are external and not on the local server so I only have an image URL.
I would like to hide all images until they are resized appropriately.
Does anybody know of a piece of javascript code that can do something similar to this?
I've got a script that caches 52 card images and displays the
appropriate card based on user input. It works fine, except when the
page loads for the first time the results are unpredictable until a
few seconds elapse. My guess is that it's taking time to cache the 52
images. Is there any way to delay the loading of the page until all 52
images are cached?
I am using DOM to swap between DIVs to give the effect of a tabbed display window. Each of the DIVs contains its own images. I don't want all of these images to load with the page but rather just to load when the relevant DIV is selected. (All but 1 DIVs are hidden initially.)
By default, is this the case? Or can I use a function to not allow the images to load until I tell them to?
I have an image that I want to delay the load of by 3 - 5 seconds. I've found tons of stuff on how to preload images, but nothing on how to delay the load of images.
I think this is something I can do with JavaScript and the setTimeout function. (If it's not, just direct me to the correct forum.) However, this is the image code and I just need to delay it loading:
<a href="http://www.website.com"><img src="http://www.website.com/image.jpg" class="imgclass" /></a>
I need to delay something either an image or a table from loading for 2-5
seconds. So far I have not find a good method.
I need the rest of the page, even the codes after the delayed image, to be
displayed in real time.
I recently set up a JQuery script to show and hide a specific DIV on my site. Everything is working correctly except when the page is loading, the DIV is fully expanded and hides as it's supposed to a few seconds later. Ideally, I would like this DIV to remain hidden until the user actually clicks on it. This seems to be a performance issue, but honestly I am a JavaScript novice so I really don't know where to go from here.
The page in questions is here. And the specific areas that use this script are the "Change Log" and "Readme" boxes.
I have a button on my site, which when clicked calls an ajax function. What I want to do though, is append a loading graphic for just 2 seconds inside the button such that it looks as if the website is 'busy' saving when the button is clicked. This is obviously just for user feedback as the 'save' is done instantly - it's just for user feedback to make the user confident that the save button has worked. To do this, I'm trying to append a loading image to the save button, delay for 2 seconds, then remove the image, but it doesn't seem to work.
I have this HTML:
<p><a href="#" title="" class="save">Save</a></p>
And this jQuery:
$
(
[Code]....
Ok i just created my portfolio site using a simple accordion effect i got from. [URL] Im very new to javascript and coding in general, so im sure my code is far from pretty. My question, is their a way to fix the delay on the way the accordion loads. if you go to my site [URL] you'll see that initially all the sections are visible and then they collapse after a few moments. is there anyway to make it so they are collapsed immediately.
[Code]....
I am trying to have a container div generated by the DOM, holdeverything inside the body. I can't get it to hold the contents in the body.
<html><head>
<style type="text/css">
body {
text-align:center;
}
#container {
width:200px;
margin: 0 auto;
text-align:left;
border:solid 1px #000;
padding:5px;
}
</style>
<script type="text/javascript">
var d = document;
function insert(){
var box = d.createElement('div');
box.id = "container";
d.body.insertBefore(box, d.body.firstChild) // not what I want
// d.body.appendChild(box);
}
window.onload=insert;
</script>
</head>
<body>
This content should be centered and inside the div.
<h3>This text also.</h3>
</body>
</html>
I've read several articles about rounding div but all use the <b> tag with some CSS style to make it round.
I would like to work more on the div itself and to find a way how to make it round-corner state. Maybe working directly on DOM, who knows.
I have only started to learn HTML, CSS, and Javascript (roughly 2 weeks now). I am having a issues regarding when I submit form data to the server. I want to temporarily disable the 'submit' button while the browser is loading and then reactivate it once everything has finished loading. This was my attempt at doing this.
[Code]....
Im trying to add some simple display features to a web application and am running into some unexpected IE8 behavior. Basically, the app runs some database retrieval from the server using Ajax techniques, and during that time (say, 30 seconds), I want to just give the user a clue as to whats going on. It could be as simple as a wait cursor. More interesting, I prefer to unhide a div with an animated loading icon, then hide it again when loading is complete.
[Code]...
I have a site that is very jQuery and image heavy. The main sections of the site link to sections that are built with several Tabs, and as it loads, you briefly see all the content load and then it is hidden by the Tabs code.
The plan is to have a full window DIV that sits above all the content with a loading icon that plays until the entire page loads, and then it fades down.
After some hair pulling and research I have code in place that does exactly as I ask, however it does not seem to work in IE6+7. It works in all other browsers.
The current code is:
CSS for the loading DIV is:
A working link is [url]
I have a lot of javascript functions that request information from an iframe hidden on the page. I see other sites do this, but their browser does not do the loading action (like the processing circle in Firefox). When I do it on my site, each browser shows the loading icon, as if a page was loading. Is it possible to not have this?
http://bit.ly/cv1YqN
That is a sample link. Go down right side of page where you see three buttons: Trailers Featurettes Clips.Those return iframe information to work.
My HTML is shown in an iframe. There is a link in the HTML that needs
the ID of the iframe to be used in the onclick event. How do I get it?
I tried accessing the target property, but it turns out to be
undefined. Also I do not know the frame number in the parent's frame
collection. SO I cannot do parent.frames[2].id.
Is there a way to determine if a div is outside of the containing div?ex.
<div id="container" style="overflow:hidden">
<div id ="row"></div>
</div>
[code]...
i want to set the second container's height according to the first container's.but how to achieve the height of the container dynamically.
View 4 Replies View RelatedI want to do this with js and not with any html/css tables, image fills or whatever other trick, but I don't know how...
Say I have multiple DIV containers below each other, which contain multiple DIV boxes floating next to each other. None of the DIV elements have a fixed height:
<div id="container1">
<div id="box1">some text</div>
<div id="box2">some double more text</div>
<div id="box3">some other text</div>
[Code]....
I want for each container (separately) to have the contained box divs to fit the biggest one in height.
For example, in container1, if box2 contains more text than the others, I want box1 and box3 height to fit box2. And in container2, if box4 has more text than the others, I want box5 and box6 height to fit box4, etc.
In my dreamworld, the solution would be flexible and fully automated, which means, it would look for all container divs of class x or Id x and apply the same rule to all child divs.
I have heard of jquery "equalheights" plugin but I don't think it can do that ? or then I misunderstood something. Could I be using some "get element by class" function and then apply a style.height to the divs?
I am using the YUI library to do the following.I use YAHOO.util.Connect.asyncRequest to obtain some HTML from the server.I then use new YAHOO.widget.Dialog(...) passing it the ID of a dynamically created DIV and then loading it with the HTML obtained earlier.Now the HTML I receive has some javascript in it, and this works perfectly in Firefox. But in IE the javascript doesn't run. It doesn't seem to work in Chrome either guess I want to know if this is a known problem, or have I done something wrong. And if it is a known problem are there any workarounds?
View 2 Replies View RelatedIn prototype with ajax.updater you can chose to show errors in another div than the one you want "real" content in.
Code:
new Ajax.Updater({ success: 'items', failure: 'notice' }, 'ajax_req.php', {
parameters: { text: $F('text') },
insertion: Insertion.Bottom
});
But all information i print out from ajax_req.php gets in the items div. How can i print out errors from ajax_req.php into the notice div?
It's the Coda Slider script on here: [url]
If you scroll to the bottom, and click: "See what our users have to say" and you can see the sliders.
It's working in all browsers but Safari, the script just doesn't seem to be loading, I get the loading scroller bars but they don't fully load. What is the best way to debug JS - is that the right term?
I have a drop area that should be pulling a value from a hidden input field when activated.For some reason, the code can see the image and set the new values but trying to get the value of the input field always comes back undefined. It's the $newSKU2 value that isn't getting set.
var $newpic2 = $('#2').find('img').attr('src');
var $newtitle2 = $('#2').find('img').attr('title');
var $newtext2 = $('#2').parent().parent().find('font').text();
[code]....
I was able to resize the images in the css with a width-max; 600px; but the container stay big. How can I resize it in lightbox.js?
Here is the code
// once image is preloaded, resize image container
imgPreloader.onload = (function(){
this.lightboxImage.src = this.imageArray[this.activeImage][0];
this.resizeImageContainer(imgPreloader.width, imgPreloader.height);
[code]....
What can I add there to have a max container?
I'm looking for an API available to select all descendants of a container, I didn't find anything yet.
View 1 Replies View RelatedI'm having trouble wrapping two adjacent divs in one parent container. For example take the following html:<div>
<div class="line"> hi </div>
<divclass="line"> hi again </div>
<div class="line"> hi </div>
<divclass="line"> hi again </div>
</div>
I need every pair of ".line" divs to be wrapped in a parent div, so it will look like this:
<div>
<div class="new">
<div class="line"> hi </div>
<divclass="line"> hi again </div>
[Code].....