I have setup a little example here: [URL] It is JSONP because of cross site policy. The returned JSON is valid, you can check the response in firebug. The callback function is not fired.
Tested with jquery 1.3.2, 1.4.2 and 1.4.4. Same result.
I use the getJSON request to fill a select (with cities names) after the user have choosen his region.
I paste some code:
The problem is that callback is never called. I used firebug and i have seen that when i change region the getJSON function is called and my script (python) return this JSON:
Why my callback is not called? I can't even get the alert ('callback time!'). I thinked that my json could be broken, but firebug net console read and parse it very well, so i think is valid JSON.
I also tried to split up the function declaration from the getJSON request, but it's no use.
I've been banging my head against this extremely frustrating bug but I finally managed to get an isolated test case. Call .animate() on two different elements one after the other and give the second one a "complete" callback. In the callback function call .stop() on the first element, the one with no callback.
The callback function should only fire once (when the second element's animation completes) but instead it fires twice. It only occurs when the animations are started in that order and stop() is called inside the callback.[URL]...
I'm trying to load dynamically some content and I'd like to fire a function when all the newly added content (including images, iframes and scripts in it) are loaded:
var htmlStr='html string including images, iframes and scripts';
$("#contents").html(htmlStr).load(function(){
alert("all images, scripts and iframes are fully loaded, you can continue");
})
According tohttp:[url]....(at least how I understand it) this should work: Theloadevent is sent to an element when it and all sub-elements have been completely loaded. This event can be sent to any element associated with a URL,images, scripts, frames, iframes, and the windowobject.Unfortunatelly my function is never called. For the meantime I found a workaround:
var html=$('html string including images, iframes and scripts');
var elements=html.find("img,script,iframe,frame");
var loadCounter = elemets.length;[code]....
I'm trying to execute a simple JSON request using getJSON but I can't get a successful response. My code is below. If I run this I always receive an error. If I add "callback?" (making it JSONP) then I can see the correct results in Firebug but the call back function is never executed.
function getResults(url) {
var gptUrl = "[URL]";
$.getJSON(url, {f: "json"}, function() {
alert("success");
})
.success(function() { alert("second success"); })
.error(function() { alert("error"); })
.complete(function() { alert("complete"); });}
I'm doing some cross domain JSON requests and I'm unable to use query strings on my webservice calls (similar to codeignitor requests but without the work-arounds, qs params are entirely off the table). Is there another way I can format the callback variable to the url request?
for instance if I need to call the following url:
[URL]
is there some way I could call the url
[URL]
instead of:
[URL]
I'm using getJSON to load data from the database onto a form. How can I specify the success & error callbacks? here's the code I'm using: EDIT: I managed to get the success callback by adding it below the $('fontSize')... but how can I set the error callback?
[Code]...
I have a small piece of code:
$(":input").each(function(){
alert(this.name);
---->OK
[code]....
I'm trying to assign the values from the JSON data returned when I run this code into an array that's outside the callback function. The data is multidimensional, and I have been able to use this data within the callback function. However I want to use it outside that function. i.e. the jsdata returned in the code below is to be used outside the function
Code:
$.getJSON('../fxns/status.php',function(jsdata){
//do some stuff with JSON data or pass to global variable[code]..........
I've been attempting to use 1.4.1 but I'm finding that $.get() and .getJSON() callbacks fail. The XHR requests succeed. I can examine the full request in both Chrome and Firebug. However, the callback functions *don't* execute. To test, I tried the same url with both 1.4.1, 1.3.2, and via a raw XMLHttpRequest(). The last 2 requests succeed, 1.4.1 fails. //v1.3.2 WORKS, fails in v1.4.1 $.get('/topic/api/template/list', function(data){
[Code]...
I am trying to implement the getJSON function.
My code for utilizing the getJSON follows:
Where un in a reference to a Textbox.
I can debug and verify that the call to
Occurs and return correct answers.
My problem is that the "success callback function" of the getJSON function is NEVER called.
build that js for a drupal module. The function "Drupal.open_upload_modal" is called on every click (alerts), but why is the click event only working once after page load?
<a href="#upload" onclick="Drupal.open_upload_modal();" title="upload">SAVE</a>
// $Id: automodal_upload.js,v 1.1.2.7 2009/12/28 02:21:20 Exp $
(function ($) {
Drupal.open_upload_modal = function(){
[Code].....
I have a script that is being inserted dynamically via anotherscript. The code in that script is wrapped inside the $(window).load() event because it requires the images on the page to have allloaded. In some browsers it works fine, but in others it seems not tofire because the page has already finished loading by the time thecode is run.Is there any way to check and see if the page has already finishedloading?Since it is a dynamically inserted script I don't have access to theonload event of the original document (aside from altering it via theloaded script - but that would seem to present the same problem).
View 1 Replies View Related<ul
id
=
[code]...
I am working on a basic AJAX website and have noticed a very small, yet frustrating issue.[URL]..If I click a navigation item immediately after clicking another one, nothing happens. Can anyone shine a light on this? Is the browser struggling to handle simultaneous click events?
View 5 Replies View RelatedI have to execute some code on the onchangeevent of a SELECT / RADIO. On IE9, it works fine. But on IE7, IE8 and Chrome, the event fires only after I lose focus from the SELECT / RADIO concerned. I tried addEventListener(), $("#some_control").attr("change", some_function), $("#some_control").change()but all in vain.
View 2 Replies View RelatedI have a textarea and a DIV as code below. The way it supposes to work is when I focus on the textarea by clicking it, the DIV will show. Otherwise, it will be hidden. Then when I click the DIV, there will be an alert(). However, right now if I click on the DIV, it will trigger the blur() event first which calls to hide() the DIV. After that, the click event is not called at all. I need to be able to click on the DIV and the DIV is not hide() at all and show alert().
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://
www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
[Code]....
In jQuery, how to select a parent element to a child if I attached a click event on the parent but also want a click event on a child within.
Let's say I have a the following code :
HTML Code:
There may be several of those classes in the page. I then use jQuery to replace the inner HTML to the clickclass div when clicked on with some other code and a input button (with an ID of, let's say 'save_button').
This works fine for that part:
HTML Code:
I then want to have the button clickable so that I can replace again the HTML in the div (like a save button). But if I try a separate event listener on the input button, it also fires the parent event. Even if I return false on the child event or use event.stopImmediatePropagation() in the .click child function.
I've managed to almost get it with the following code :
HTML Code:
If the event is triggerd form 'clickclass', then replace with HTML + input button
The problem is that whenever I try using .parent() with jQuery, it always tells me that parent() is not a function. I've tried various other ways of getting the parent object (the clickclass div) but can't get it to work.
I have a page with a form, that represent questions and the corresponding answers.I defined the minimum questions, answers, and their maximum.So I added a link in the form to add question (along with the minimum amount of answers), and a link per question to add an answer in it.the "click" event for my links is like:
$(document).ready(function(){
$(".addquestion").click(function(event){...});
$(".addanswer").click(function(event){alert("addanswer");...});
});
the code look more like JS, but basically it.adds the html code in the corresponding divs.The problem is the following: if I add a question, it also add a link to add answers to this question, but this link does not fire the event.Did I miss something to add to make it work?I mean the link in html page is exactly the same, I even tried not
changing the part with the int, it still doesn't work.
I have several onChange events tied to some html tags. I will like to know which ID fires an event.
View 3 Replies View RelatedI am building an asp.net web application using visual studio 2008 with .NET 3.5 on an XP 32 bit machine where I have the server as well. a cSharp code behind and jQuery javascript client code are used. The site has a master page.
When I Start Debugging the aspx page, it fires up the cSharp Page_Load event.
When I hit the Button1, the jQuery event get fired, but the cSharp Button1_Click never gets hit.[code]...
I have a question about event handling in javascript.Let's say I have 3 divs, directly in the body of an html document.
<html>
<body>
<div id="div1black"></div>[code].......
Each of those div's is positioned differently using css, as displayed in the image below: Each div has an event listener for the click event.In the image above I marked a point. If the user would click on that point, are all 3 event listeners supposed to fire? As I understood it, there's a capture and a bubbling phase, but these only go down through and up from the ancestors of the target right? And none of the div's are ancestors of eachother, they just happened to overlap because of the css position.
How would I let all registered eventsHandlers be fired whenever a user clicks on overlapping HTML elements? (so the eventHandlers for each of the 3 div's should be fired).
I have a text field. when i set data into the text field from other javascript function then the onChange event does not fired of the text field. is there any other way to check the text changed of the text field? My text field is readonly. and date are set here from datepicker.
View 3 Replies View RelatedI'm writing an XML generating app here, and i have come across an interesting problem. When i click on any part of the body of the document, the function addRow() is being triggered. This is odd, because the only event handler that should ever fire this is a Button that much be clicked, and it is also triggered once when the document is Loaded.
The biggest question is, ...why when i click anywhere on the document, is this even being triggered.
Here's my code (sorry it's a bit long..but copy and paste and you should be able to replicate what i'm getting)
Some notes:
1. removing the script tabber.js does not change this error. It still happens
2. removing the onLoad= in the body, and manually adding in the first table cell, and row of the table seems to fix this, however, i need to eventually load a list of table cells from a CSV file. So that workaround won't be sufficient
<html>
Trying to upgrade from JQuery 1.4.3 to 1.6.1. My getJSON queries no longer populate my SELECTs. The below code works perfectly in 1.4.3 but unsure what changes I need to make for 1.6.1.
function populateCause() {
$.getJSON(urlQueries, {sql:'list_causes'}, function(data) {
var select = $('#opencause');
var options = select.attr('options');
[Code]....
The ONLY change I made is sourcing JQuery 1.6.1 instead of 1.4.3. Evidently I need to change the method of parsing the JSON data also.
I need to figure out how to add a button/link that when fired will navigate to a particular pane...
View 1 Replies View Related