When the page loads initally all events work. There is a button that does a postback but does not reload the page. If you try to execute any of the events that you previously did it does not recognise it.
View 1 RepliesHow may I catch all postback events which are triggered by all controls using jQuery in an ASPX page?
I am using the below provided code and displaying an alert window when any control posts back to the server, however not all postbacks are getting caught by the highlighted code.
protected void Page_Load(object sender, EventArgs e)
{
if (Request.ServerVariables["REQUEST_METHOD"] == "POST" || Request.ServerVariables["REQUEST_METHOD"] == "GET")
[Code].....
I built a small website which has a confirmButton on it. When you click the confirmButton a dialog will appear which asks you to confirm or to cancel.
The problem is that after you click 'Yes' on the dialog (executes postback) the jquery-click-event on the confirmButton doesn't work anymore.
Below you can see my whole website.
I have a six DIVs, each containing another DIV that slideUp and/or slideDown upon a click on the its parent DIV. Each DIV has a textbox, or a datagrid, or a textarea and a button (to save the data). I have a click function attached to the parent DIV that changes the class of the child DIV (expanded/collapsed). Also, the click function calls another function to save the state of each child DIV. The idea being to maintain the state of the DIVs upon return from postback.
The slideDown and slideUp work upon the page load, or going to another page and returning to the page (not using the back button). The slideDown/slideUp cease to function when I click the save button within the DIV and the postback occurs. The other DIVs function as intended after the postback until I click a button on one of the remaining functioning DIVs, and then that DIV is now not functioning as intended. It acts as if the slideDown/slideUp was replaced with show/hide. The state of the DIVs are maintained upon postback.
I am working on a Javascript application and i am facing a strange behavior of the application in IE. I am creating a table at runtime using DHTML and registering event for the table row click. When i deploy this application on web server and browse the application, the events fires in firefox and chrome but in IE the events are not fired. If i browse the application from the server with localhost, the application triggers the events and fails when i use machine name.
The following is the source code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
[Code]....
I have this code in a website I'm making:
$(document).ready(
function () {
$('body').keyup(function(event){
console.log(event.which);
[Code].....
But the event isn't working all the time. It stops working after I change to another window and come back to the browser window.
I've tried like this:
$("#loading").ajaxStart(function() {
$(this).show();
}).
ajaxComplete(function() {
$(this).hide();
})
I've triple checked the id of loading image and everything, but still doesn't work.
I am new to jQuery but loving the functionality thus far. I am having an issue however. The below code works fine if i do a full postback and on initial load.
[Code]...
I'm new to jQuery, and I'm wondering how I would go about making a control post back to the server automatically, in my case I have a mobile datepicker, and I'd like for it to post back to the server when a date is selected from the calendar. I'm sure it is very simple, but I am new with jQuery.
View 2 Replies View RelatedI've got this page: [URL].. displays events via an xml feed, but no one in the UK or any other country other than the Americas can see the events.
View 2 Replies View RelatedI've used to an AJAX call to load a HTML table into div. This is working successfully. I know want to use a click event on buttons located within the inserted table.
The click event is triggering on buttons outside the inserted table but not on the buttons within the table.
Do I need to call some sort of refresh function to so that jQuery is able to pick up these events?
I am trying to call a deactive_tiptip function from tiptip source code when partial updates happened.I want to call that function inside this code
function pageLoad() {
if (Sys.WebForms.PageRequestManager.getInstance().get_isInAsyncPostBack()) {
}
[code]....
I have this form entry <input type="text" onkeypress="return numbersonly(this,event); lessthan100(this);" name="discount_value" id="discount_value" value="" style="width: 40%;" maxlength="3" class="input-symbol-parent"> which calls two javascript functions. The first one works without a hitch... no letters can be entered into the field. However the next function (which at present time, just contains an alert) doesn't fire and I get no alert.I need to check if it's a number first. Below is the number checker.
function iscontrolkey(key) {
if ((key==null) || (key==0) || (key==8) || (key==9) || (key==13) || (key==27) ||
(key==63232) || (key==63233) || (key==63234) || (key==63235) || (key==63272)) return true;
else return false;
[code]....
I am trying to "ajaxify" my site. Now I have one problem:
$("#posts").children().remove();
$("#tag-sidebar").children().remove();
$.each(data.Tags_Sidebar, function (indexInArray, valueOfElement) {
var insert = $("<li>");
[Code]......
Now when I click one of those links (href1, href2, href3) generated, the click event won't execute! What's the problem? Also, is it right that I have to transfer the valueOfElement over, like I did? What does stopEventPropagation do? Prevent the href from being navigated to? That's what I am trying to do.
The data object is JSON fed from here:[URL]
The HTML is here: [URL]
I have a simple javascript overlay (like a lightbox) with a message that pops up. The user is meant to click a button, see the overlay thanking them for their vote, and then be redirected to the affiliate page (its a poll site) after about 3 seconds. I have everything down, except, it will either display the overlay as one of the onClick events, or it will do the timedRedirect but not both. I've tried putting the redirect before and after, and when its before it redirects, when its after, it shows the overlay. How can I do a timed redirect and show this message?
<script type="text/JavaScript">
<!--
redirectTime = "3500";
redirectURL = "http://x.azjmp.com/2KTCs";
[Code]....
I'm trying to enable/disable a textarea. I am able to do a mouseout disable, but cannot do a mouseover enable. For instance, when I click on the image, a textarea shows up. When I move my mouse to a different location, the textarea disables fine.Then when I try to move my mouse back over the textarea, it DOES NOT enable for me to write in it.I just happen to try out this code in IE and the textareas are not showing up where I click. I assume that I'm capturing the X/Y coordinates incorrectly for an IE browser.
********* CODE *************
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>[code].........
Is there a way to detect if an textarea onscroll event is working in
Firefox (or Mozilla). I know that there is an onscroll event bubbling
bug with current vesions of these browsers so I want to detect this
problem with a test like "if (textarea.onscroll == 'undefined' ||
!textarea.onscroll) {}."
I have a problem that the window.opener variable is lost once my popup
page has a postback. On multiple pages they address this problem but I
cannot find a correct answer.
This is my situation:
I have a main page which shows invoices. When a user clicks on the
invoices they get a popup where they can alter the invoice which uses
postbacks because of direct changes in the database. Finally the user
can click a button to accept the invoice and then I need to change two
variables on the main page which opened this popup, the new invoice
fee and status (which is based on the button pressed). I dont want any
postbacks on the main page, therefore I simply want to pass these two
variables from the popup to the main page.
However, after a single postback on the popup page the window.opener
variable is gone and lost forever. Now I have seen solutions using
frames but I do not know how to go from there because I also pass some
variables from the main page to the popup.
In my jsp project i am using the calendar control which selects the Birth Date of the client and on that basis it calculates the age after completion of all the fields user get registered successfully.but when registered user trying to update his date of birth his age field is blank, tell me why this happening Also tell me the javascript function.
My jsp code is:
I am trying integrate an upload system from YouSendIt.com in to my companies forms. The code they give for integration is basically an iframe with a coded URL set for the source. Their server sends a postback using HTTP Post method but I am not sure how to access the data that is sent back. I do not need to display it but I need to use it for validation purposes in the rest of my form. The Iframe code is as such:
<iframe style="margin-left:20px;background-color:#ffffff;overflow-x:hidden;display:block" id="file_upload_iframe" name="file_upload_iframe" src="https://www.yousendit.com/v1/ibox.php?sitebox=1011503&sh=adeace4e28613bc36fb1fa3c6ef766ee&send_notification=false&custom_postback=true" width="600" height="250" marginwidth="0" align="middle" frameborder="0" allowtransparency="true"></iframe>
[Code]...
I have a ColdFusion page with a select drop down list. On submit, I'm storing the value in a cfparam and trying to use jQuery to auto select that particular option. Currently I'm using :contains but this is unacceptable because it selects the last item that contains the cfparam.
$("option:contains('<cfoutput>#form.company_type#</cfoutput>')").attr('selected', 'selected');
Is there something like this:
$("option").equals('<cfoutput>#form.company_type#</cfoutput>')").attr('selected', 'selected');
[Code]....
I willconsider other alternatives to accomplishing my objective.
Im creating a task loggin system and this allows the user to raise tasks and update them, im using javascript for validation and if the fields are empty it then changes the fields back ground to Red which is fine but then it goes on to update the data in SQL which i dont want, any suggestions or how i can achieve no post back is the result from the function is False (for fields in error)Html Code where im calling the function
<asp:button runat="server" id="btnChangeCommentsAuth" CSSclass="RaiseButton" OnClientClick="CommentsCheck('MainDisplayContentChange_txtAuthCommentsArea');" PostBackUrl="~/RaiseTaskChange.aspx" Text="Auth" />
[code]....
I have a series of images with an animation bound to mouseover and mouseleave events, and I'm trying to get my head around adding a click event that would prevent the mouseleave animation from occurring only for the image that was clicked, preserving everything else as is (until another image is clicked). I've discovered .stop() and I think I'm getting close, but some part of the logic is still escaping me.
View 3 Replies View RelatedI've got 2 pages: a current events page and a past events page the current events page loads fine as there is only about 10 events the past events page takes about 30 seconds to load and will crash if u click your mouse in the loading time.
The pages are near identical the only difference is the query that selects the events (> versus <)
The page loads immediately without:
But when i put it back in the above happens. I'm using jQuery.roundedcorners.
I continue to read "jQuery In Action" and one doubt came into my mind when I was reviewing the chapter 4 that talks about Event handlers.Within a particular code sample (bamboo.html), the author has written a ".change(fn...)" method with a function to handle the event that manipulates the changes made within an "input[type=text]" to reflex the price to pay against the amount of product the client selects , and, at the end of the same wrapped set, it's included a call to the "change()" method again (see the code below).My question is, when is it necessary to call the event handler (e.g. ".change()") more then one time within the same wrapped set?
$('span[price] input[type=text]').change(function(){
$('~ span:first',this).text( $(this).val() * $(this).parents("span[price]:first").attr('price') ); }).change();
Geeting a JS error from IE 6 only in this method: handle: function( event ) { var all, handlers, namespaces, namespace, events;
[Code]...
On the last line of the code snippet above. It appears to me that IE6 doesn't like the fact that the events object is undefined. To trigger this error we are doing a simple blur binding to an input box. ex:
$(field).bind('blur', function(){onfocusout(this);}); It appears IE 6 stops executing JS after the error (imagine that). Is this an issue in jQuery core or BTW I know MS has dropped IE 6 support but we still have customers.