JQuery :: Adapting Xhtml Layout For Photo Slider To PHP Blog Template?
Jun 18, 2009
I am hoping to use a 3rd party script for a simple JQuery photo slider for my WP blog. But the script creator says: "If you are trying to 'include' this into a blog template then you will need to have a good knowledge of the template structure and how it is pulling the information from the database. The files that I supply are intended for use in a normal xhtml page where you would just add the javascript calls and stylesheet links to the page head, then embed the xhtml into the web page or use a simple php 'include' to add this at run time." He couldn't help further. The blog theme I purchase comes with a photo slider but I wasn't happy with it 100%. I took the code from the new one and put it in as best as I could where the original one was formatted. I am not a programmer though and I know that clearly I did not do it right, as I used "a" ids like you would in HTML and I know they don't belong in PHP. However, it magically is working somewhat! All the graphics are showing, it's pulling images, and they are sliding. I just need to clean it up a bit. Here is a page where it is on:
[Code]...
View 2 Replies
ADVERTISEMENT
Apr 8, 2010
The Problem: I have the following code in my head section of my page:
<script type="text/javascript" src="js/random-testimonial.js"></script>
However xhtml will not allow </script> so to counter this I try to make the code into this:
<script type="text/javascript" src="js/random-testimonial.js" />
Thing is, when I do that, my whole layout messes up, it's as if it is ignoring my stylesheet when it is in the php version of the site, when it is in a normal html file, it pushes my main container to the left and then you can not see the header container properly, only a little bit of it. Everything seems to work fine if I keep it the code like the first shown here but I can not have it like that for xhtml, is there something I am missing here?
View 6 Replies
View Related
Dec 22, 2006
How can I have it keep the photos in their original proportions. All photos are under 640 x 480 though not all the same size. When they are viewed in the slider the are streteched to the 640 x 480 regardless of their original size.
View 2 Replies
View Related
Oct 27, 2010
Notice: This is a discussion thread for comments about the SitePoint article, Adapting an Interface for Touch Devices.
Interesting technique!
View 2 Replies
View Related
Apr 28, 2010
I would like to have a code on my page that causes two or more photos to change between each other. For example, photo 1 is shown for a little while, then it switches to photo 2, etc. I would also like to switch text that goes along with the photos. I would like my layout to look like this:Photo / Text about Photoand have both switch after a little while, to the next photo and text.
View 5 Replies
View Related
Dec 16, 2011
I have a form with two slider on it so the user can select an amount. The slider works fine and passes the values to email ok etc. but when the page is loaded there is "[object Object]" in box of the second slider. I can't find the problem with the code as it is the same for the first slider.
Here is a link to the form: [url]
<script>
View 1 Replies
View Related
Jun 27, 2011
I got 2 sliders in a List:
<li data-role="fieldcontain">
<label for="slider_year"><big>Jahr auswählen</big></label>
<input type="range" name="slider_year" id="slider_year" value="2000" min="2000" max="2011" />
[Code]....
Both alerts wont get called...
I know this should be very easy, but i dont get it.
View 1 Replies
View Related
Oct 12, 2009
1.I found a Slider Toggle thats demonstrated here [URL] and it seems to work fine but only if the link is placed above the div that slides down.. im trying to make the div slide down from above my menu and i want 1 of the links on my menu to toggle the slider. how do i get it work to where I can place the link below the sliding div? 2. the script originally used .fader{opacity:0;display:none;} but I wanted the slider div to be visible if javascript was disabled so I added
jQuery(".fader").hide(); so its now
<script type="text/javascript">
$(document).ready(function() {
jQuery(".fader").hide();
$(".fadeNext").click(function(){
$(this).next().fadeSliderToggle()
[Code]...
View 4 Replies
View Related
Feb 16, 2011
i am using jquery slider.i need to display the values on mouseover of the slider handle
View 4 Replies
View Related
Aug 11, 2010
I have to change the slider color depending on its value, but I didn't manage to do it, I changed the attribute "background" of the class "ui-slider-range" this way : $("#slider.ui-slider-range").css("background","red"); Since I have three states (red, orange and green) I have to use three sliders, each one has one color, all hidden at the beginning then I show the appropriate slider when the value changes.
View 1 Replies
View Related
Nov 2, 2010
I've got the following problem: I have a Jquery slider and I want to disable the click on the slider. I only want to change the slider when I click and drag the pointer. Standard you can also click everywhere on the slider and the pointer will go to that point. That I don't want. .
Code HTML4Strict:
<!DOCTYPE html>
<html>
<head>
<link href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8/themes/base/jquery-ui.css" rel="stylesheet" type="text/css"/>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js"></script>
<script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8/jquery-ui.min.js"></script>
[Code]....
View 4 Replies
View Related
Jun 9, 2011
I have a php code that creates a select combo box depending on some values stored in a database and I am trying to make it look nicer I found the jquery slider I found this but it does not work in the environment I am working (joomla) well, it does but it disappears as soon as I move the slider. so if I had
Code HTML4Strict:
<select id="someId" >
<option>1</option>
<option>1</option>
<option>1</option>
</select>
is there an easy way to transform that into a slider?
View 1 Replies
View Related
May 29, 2009
I am trying to put together a Adobe Air Application that is basically a RSS feeder for my blog (custom made). I have the Air application all design and coded on the front end in terms of how it looks. My problem now is that I dont know how to get that XML document to my Air application using jQuery. Im still a beginner at jQuery (and JS in general).
View 1 Replies
View Related
Jan 28, 2010
I have set up a reverse proxy for a wordpress blog that is using the theme mystique. When I use IE to connect directly to the blog the theme works fine and loads ie7.css When I connect through the reverse proxy to the blog the theme does not load the ie7.css
From what I can work out it looks like the person who wrote it is using jquery to determine the browser type. Any ideas why jquery would fail when passed through a reverse proxy?
View 2 Replies
View Related
Nov 6, 2010
On my website I have a lot of entries which are similar to blog-entries. Every single entry has about 500 signs and if there are more than there is supposed to be a button "read further"(atm there is no button but later it will be). If the user click this button, the remaining text of the entry is supposed to slide down. My problem is now that I don't know how to slide down just one article. Every article looks like this:
<article class="dark">
<div class="text"><h2>Title</h2> .....
<div class="slide_text"> .....
</div></div>
</article>
But how to slide down only the "slide_text" which belongs to the clicked article. If I use:
$('article').click(function() {
$('.slide_text').slideToggle(200);
});
Every singe "slide_text" of all the entries appears. But this is not, what I want. Is there a way to toggle just the child-slide_text of one entry? Or do I have to give every entry an id to define which entry is supposed to toggle?
View 1 Replies
View Related
Aug 22, 2010
I'm using the plugin jquery-tmpl. Is there a way to specify a callback after a template is run? I want to do something like
<script id='itemTemplate' type='text/html'>
<li class="item" id=${timestampMs}>
<span class="content">${content}</span>
[code]....
Where processItem does something to the <li> element that just got generated. As it's written, though, the element doesn't exist at the time processItem is called.Here's how I run the template:
// Make the AJAX call to the service
$.ajax({
dataType: "json",
[code]....
View 2 Replies
View Related
Dec 19, 2010
I'm trying to use the jquery template plugin on ie, the code looks great on firefox and chrome but ie refuse to show any data.I'm attaching a sample code , this not the full code, just an example.
<script id="menuitems" type="text/x-jquery-tmpl">
<h2 class="trigger"><span> ${Name}</span></h2>
<div class='toggle_container'>
[code]....
View 3 Replies
View Related
Aug 10, 2011
I have:
<script id="foo" type="text/x-jquery-tmpl">
<p>${100 * parseInt(x)}</p>
</script>
When I do:
$('#foo').tmpl({'x':5}) // or '5'
[Code]...
I've been searching and everything I find says that ${} should be able to handle arbitrary expressions, but there seems to be some syntax magic/intolerance going on here.
View 2 Replies
View Related
Nov 12, 2010
Is it possible to check if template is already compiled and in the stack? For example I need a boolean check, to decide to make ajax call for template or pick it from compiled stack.
var callback = fucntion(template){do stuff...}
var template = $.tmpl('thumbnail',data);
if(!template) {do ajax and get template, then use callback}
else{
callback(template);
}
This would be great, but it doesn't work. $.tmpl doesn't return false if template isn't compiled and in stack.
View 3 Replies
View Related
Jul 1, 2010
been looking for a solution to this one for a couple of days, with no luck, I downloaded an under construction template from herethat incorporates keith wood's countdown timerjquery plugin. Its a perfect template for my site. Trouble is i just can't find a way to adjust the timer. it works fine, without adjusting any of the code but it's default display reads that there's 500+ days estimated to launch. As it's for my business website i don't want people to be put off visiting again, so i wanted to adjust the timer to just a few days. (i.e estimated time of launch 3 days, 72 hrs, however many mins & secs)
[Code]...
View 2 Replies
View Related
Nov 23, 2010
I am building a website and on my homepage there is a small section where I want recent blogs to be posted. Of course I want a page for blogging also. how to do this?
View 5 Replies
View Related
Apr 23, 2010
I use Accordion into a tab and I have a particular problem just on FF.. When I click an accordion header the whole layout move on the left side ... This is the page, so you can see my problem: [URL]
View 5 Replies
View Related
Jan 10, 2012
I just wonder if there is a jquery plugin or something that enable me to create a html pagelayout with drag n drop.
Lets say i have a blank page with a div container, then i have a couple of layout elements that i can drag into that container, like 2 coulmn, 1 column, 3 column.
I hope you understund what i mean. something like sitefinitys template builder but in a light version.[URL]
View 1 Replies
View Related
Oct 27, 2009
I am trying to block the whole page, but blockUI is not working with my layout (like the simple layout in demo).
View 1 Replies
View Related
Nov 1, 2009
The only issue I can't figure out is the image will not align to the left. I tried numerous things but I'm whooped.
<html xmlns="http://www.w3.org/1999/xhtml" >
<head id="ctl00_Head1"><meta content="text/html; charset=utf-8" http-equiv="Content-Type" /><title>
[code]....
View 3 Replies
View Related
Jul 17, 2010
I subcontracted a programmer who replaced my jquery.js with a different version of jquery. This version breaks my function, but my version breaks the layout. I have a function that works with
Code:
jquery.tools.min.js
But not with
Code:
jquery.js?ver=1.4.2
Here's is my function:
Code:
<SCRIPT type="text/javascript">
$(document).ready(function(){
$('.theVideoLink').click(function(e){
e.preventDefault();
$('#VideoContent').load($(this).attr('href'));
});
});
</script>
I need this code to work with
Code:
jquery.js?ver=1.4.2
But it doesn't. It works with
Code:
jquery.tools.min.js
But this jquery.tools.min.js breaks the layout in IE7&8.
View 3 Replies
View Related
