I downloaded a form that I'm trying to add some modifications to. I'm appending a class to a tag once the validation on a form input fails. But I can't seem to have it removed once the validation "passes"
HTML:
<ul id="formField">
<li>
<label>Phone:</label>
[Code].....
I have table that has four columns and many many rows. It is quite long. I need to add a special divider (border) between each td cell. I thought I could create a css style .border_right and apply it to all td cells using jquery addClass() and then remove the class from the fourth td cell in each row so it does not add to or affect the outside border of the table.
My question is, how do I remove the class from the fourth td of each row using jQuery? I figure there has to be a shortcut way (one or two lines) to do this using jQuery so I don't have to manually add a 'class="border-right"' to each td I need it on.
I have several conditional select boxes that populate from a database, using .ajax(). When the first select has an onchange, the second select populates normally. The same goes for the second and third selects. When I change the value of the second select box, the third box drops all dynamically created options and repopulates. When I change the value of the first select box, I can only empty the second box and repopulate. The third and future boxes keep their values.
The delete and repopulate piece of my function uses this bit of code: var dynamic_options = $("#" + next_dropdown_ID).children(".dynamic_option"); if ( dynamic_options ){ $("#"+ next_dropdown_ID + " .dynamic_option").remove()};
where next_dropdown_ID is the ID of the child select box. I've played with .find() and .filter() but the results are always either (a) ALL options with this class are removed, including the select I'm currently in, or (b)NO options with this class are removed.
Is it possible to delete ALL options on the page that have the ".dynamic_option" class, except for the children of the select box I'm currently in? I was hoping to be somewhat dynamic about it and not have to write an IF statement for every potential select box, so the code will be reusable. I can post the full function and HTML if more context is needed.
This is essentially the effect I'm going for:
function quickadd() {
$('.menu').addClass('red').delay(1000).removeClass('red');
}
So, from what I've gathered from the docs, this doesn't work because the addClass and removeClass functions don't observe the queue. How could I get around this and setup a function that will add a class, wait a second, then remove that class? Would it require me to go outside of jQuery a bit and use some standard JS?
I have a lot of information on my site that is in multiple categories. I have a list of categories, each with its own checkbox. By default, all the information is displayed (therefore all the checkbox's are checked by default).When someone unchecks the box I want to hide the divs with that class, and when someone rechecks the box, they should reappear. Here is my code so far. It is hiding the div's fine, but they are not reappearing when user tics the checkbox again.
<script type="text/javascript">
function toggledisplay(category){
if(document.getElementById(category).checked){
[code]....
I made a shortened version of code:
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js" type="text/javascript"></script>
<script src="http://www.ylakiudarzelis.lt/js/jquery.validate.js" type="text/javascript">
[code]....
i have situation that i need to remove table that is automaticly generated, but i also need to not remove contents of table.
<UL>
<table class="mytable" width="100">
<body>
[code]....
I have just got myself a copy of SWFUpload to show the progress of file uploads, however, it has a few problems, one of which I am trying to fix with the aid of jQuery. Essentially, if JavaScript doesn't load, then a standard input file element will be shown. But, if JavaScript is enabled, then jQuery removes this, and replaces it with all of the input elements that SWFUpload requires. Is this the best way of doing it, or should I be looking at another option? If so, how would I go about telling jQuery to remove and insert the form field, and each and every attribute the HTML will require?
View 11 Replies View RelatedI'm using jQuery Validation on my form with ajax submit, but for some reason the label error message is replacing my input field completely. I can't figure it out for the life of me... Here's my html/js. I'm using the default validation since i'm using the ajax submit. I've also tried the custom error's with no luck. Both the label.error and input are displayed as blocks.
[Code]...
I have a page that opens up an iframe for the user to be able to select photos. Each photo has a checkbox, and on select I add a hidden form element to the parent frame form. This all seems to work fine, but im now stuck on how to remove the form element when the checkbox is un-checked.
[Code]...
The simple test code below validates a few fields successfully when tested using Safari, Opera, Firefox and ChromeDatepicker does not work in IE, although the validations do work as expected. Is there an issue with datepicker and IE? Is there a condition in my code that inhibits IE?
//// page code follows ////
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]....
Having a problem with validation, it's been a while since i have done some javascript but i'm pretty sure it used to work on both browsers but i can't get this to validate in FF.
[Code]...
I am having trouble getting my code to validate for my speed/distance calculator.I have 2 input prompts: 1 for hours and 1 for minutes. The issue is I can put a number for hours (e.g 7) and W for minutes and the result will display distance is NaN, whereas I am expecting it to alert user to input a valid number. The same issue applies if I switch the order of isNan(hours) and isNaN(mins)
[code]....
my code below works for BillingAddress2 but it doesn't for ShippingAddress2 (when you click off the ShippingAddress2 form field it alerts undefined)these form fields are in the same form
JS
$("input").blur(function () {
if($(this).val() == '') {
[code]....
[URL]
How can I make my form disappear once the form has been completed and the success message pops up.
Just wondeing if there is a way to keep from having a certain
parameter sent when posting a form to another page (method=get)...
So as an example a page will post something like this from a form
using "get":
http://mypage?firstElement=1&secondElement=2
How can you completely remove "secondElement=2" from the
querystring... Before moving on to the posted page?
I know you can actually remove the element using removeChild in
javascript, and therefore it won't show up in the querystring of the
page posted to:
ochild.parentNode.removeChild(ochild);
But I was wondering if there was a way of doing it? A person can see
an inputbox for example disappear for a split second before the page
is posted... Is there a way of accessing the querystring itself in
javascript? Or some other way then removing the element?
I'm trying to make my form both check that the e-mail's match and also be case insensitive when being submitted. I've figured out how to get the e-mail's to be checked to match, but can't figure out how to also make it not case sensitive.
This is what I have so far...
<head>
<script type = "text/javascript">
function checkSame() {
var emval1 = document.cform.email.value;
[Code]....
I have been given a piece of code that validates passwords, but need to edit the code with correct variable names and indentations etc.
Here is the original code:
What the variables n1 and n2 are/ what they do?
I created a page with a thumbnail viewer. Click on a thumbnail and a larger version appears on the same page, NOT a pop up or Lightbox. It previews and validates fine. Even runs in IE. But not in FF(V. 3.6.18). Ideas? Code below with JS highlighted.
[Code]...
I have a form that has it's HTML inserted into the database (yeah yeahI know..not my idea..I'm new here and just finding this out).Anyway, each form field has an embedded class in the HTML.The form is dynamically generated. Can be anywhere from 5 to 10 to 20to 50 fields.How can I loop over each form field and add a new class to the field
View 8 Replies View RelatedMy code: [URL]... When I click on Upraviť in class edit I need add some HTML code to begin and to end of class entry how to I can select class entry in the same class post on which I clicked?
View 1 Replies View RelatedI'm working on a little project where they have a slider form and I need to piggyback a tiny line of code into the validation function for the form.
What I need to happen is when the user has filled in all the fields and clicks the submit button AND the data validates THEN a class is added to the body tag. My jQuery knowledge is very minimal - I added the code to where I 'thought' its supposed to go but it didnt seem to work.
jQuery(document).ready(function() {
jQuery('#scroller').css('overflow','hidden');
// Set up the scrollable registration
var wizard = jQuery('#scroller').scrollable();
[Code]....
I'm running validation on a form that has two components, a payments segment and an address segment. Both of these need to be within the same form. By default, the address segment is hidden. Upon validation, I would like to display the payment segment, but only if there are validation errors within that segment. Using invalidHandler, I've been able to successfully fire a function when errors are returned, but I haven't found a way to check if there are errors within that container. My plan was to check for the invalid class within that container... something like this:
$(#formname).validate({
invalidHandler : function() {
if ($('.client_validation').length)
$('.billingAddress').addClass('showForm');
}}});
The problem is that the invalid class (.client_validation) isn't applied when the invalidHandler function is executed.
Im trying to nut out a check box validation
The goal- the check box as default is unchecked and when checked validates a text area for text
CODE:
I have a huge blob of code but the main part I am focusing on is this
$('.billboard_click').click(function () {
//this remove class
$(".billboard_click").removeClass("billboard_click");
});
1. Execute a click event when the div with the class 'billboard_click' is clicked
2. Once clicked, remove the class from that very div to avoid another click from happening
3. Execute a series of events such as animations, etc
4. add the class back to the clicker div
The code does not seem to work as expected but I am wondering if I am having issues elsewhere at this point and wonder if this actually is known to work
I am new to this discussion but hope you would post reply for my query and encourage me to keep in touch with this discussion. Well here is my problem. I have made an edit in place form in which we can add and remove the elements. I have used jquery.jeditable.mini.js and jquery.duplicate-remove.js plugins for edit in place and add and remove action. I have live() function to access the dynamically ganerated elements like this. $(".addressDiv span").live("mouseover", function(){
clickable function here...
[Code]...
