JQuery :: Can You Affect Click Event Precedence?
Jul 5, 2010
[code]I'd like to click FirstDrilldown and have it display div#SecondDrilldown. Then I'd like to be able to click SecondDrilldown to fire off a different click handler. The problem is that the click handler bound to the FirstDrilldown intercepts the click. I'm fairly sure I could bind and unbind the click FirstDrilldown click event but that's kind of an inelegant solution.Is there just a way to just promote the SecondDrilldown click event to have a greater precedence than the one associated with FirstDrilldown?
View 2 Replies
ADVERTISEMENT
Jan 18, 2011
How do i make it so that when there is an event insidean iframe on the page, it affects and can call a function from the outerpage? (that houses the iframe
View 1 Replies
View Related
Nov 23, 2010
I would like to create a plugin that I can put before a click event on a button. The click event should occur if the user's time on the page hasn't expired. The plugin should check the user's time, and then stop the click event if the time has expired. With the plugin, I'm essentially putting two click events on the same button, as I need to check the expiration when the button is clicked. The plugin is working on my test page, but I'm afraid that this is contingent on an arbitrary ordering of the click events by jQuery. If I have my click event chained after my plugin, can I be assured that the plugin would always stop the click event if the time is expired? Or could jQuery execute the click event before the time gets checked?
(function( $ ){
$.fn.checkExpiration = function(
$this = $(this);
return this.each(function(){3
[Code].....
View 3 Replies
View Related
Jul 14, 2007
Basically, I have a div section in my xhtml that I want visible for
print (div {display: block;} in my print css), and visible if somebody
has javascript disabled (therefore also div {display: block;} in my
screen css), but not visible on screen with javascript activated
(i.e., turned off in javascript with div.style.display = "none").
The problem is one of precedence. When displaying the page on screen I
want my non-interactive javascript code to execute after the css rules
have been applied (so I put my javascript within window.onload). But
when a user attempts to print, I'd prefer if the css (for print) were
applied after the javascript. Unfortunately this doesn't seem to be
what happens.
View 1 Replies
View Related
May 31, 2010
How can I give a click on a link when it is just created and added to DOM?
None of this works:
function openProfilePage(profile){
$('#profile-link').remove();
var link = $('<a/>').attr({'href':'profile.php?user='+profile, 'target':'_blank', 'id':'profile-link'}).css({'top':'-200px','left':'-300px', 'position':'absolute'}).html(profile);
[Code]...
View 7 Replies
View Related
Apr 8, 2010
I have an object that has a click event I'm trying to trigger. However in the click event I have the following if statement:
if(event.button != 0){return true;}
This if statement allows right clicks to go through and activate but it also prevents me from triggering the event. Any ideas on how to prevent this? If I remove the if statement from the first click function everything works as intended.Here's my example code based off of the trigger event examples:
<!DOCTYPE html>
<html>
<head>
[code]....
View 5 Replies
View Related
Sep 30, 2011
JQuery click event fires on second click but not on first. I have had this happend before some time ago.
View 6 Replies
View Related
Oct 25, 2010
I don't know how to select an element inside other elements, like div's. I have my html site like this:
<div id="container">
<div id="top"><h3>Title</h3</div>
<div class="desc">
Lorem Ipsum dolor set...
</div></div>
<div id="container">
<div id="top"><h3>Title</h3</div>
<div class="desc">
Lorem Ipsum dolor set...
</div></div>...so on...
I want to click on any h3-tag and the jquery should open the next div with class desc. At the moment I use this script:
$(document).ready(function(){
$('.desc').hide();
$('h3').click(function() {
$(this).next('.desc').toggle(400);
return false;
});
});
I absolutly dont know what to change inside the script to affect the next div with class desc.
View 7 Replies
View Related
Aug 24, 2011
I create buttons from an array of objects that such as:
buttons = [{ text: "button 1", action: 1}, {text: "button 2", action: 2}];
I then loop thru the array to assign the text and bind the click event after having created the buttons with IDs of "button_<index>".
for( var index in buttons ) {
$("#button_"+index).html ( buttons[index].text )
.click( function() { clickButton( buttons[index].action ) } );
}
The text appears correctly in the button, but every button defined only fires the list bound click, in this example the action equal to'2'whether I push "Button 1" or "Button 2".My actual case has four buttons, all firing the event for the fourth button.I've tried not chaining the .click(), going thru the loop twice once for the .html and once for the .click, neither of which made a difference. If I hard code each button .click, it works fine.
View 2 Replies
View Related
Jan 24, 2011
I want to call the click event of the link (anchor tag) on the click of the button. I used this code below in the click event of button to call links click event and it works fine in IE.
document.getElementById('linktag').click();
But, this doesn't work in Firefox. I googled a bit and found that in firefox, you have to do something more to achieve this behaviour. So, I ended up doing this on button click to work in firefox:
var link=document.getElementById('linktag');
var e = document.createEvent('MouseEvents');
e.initEvent(
[code]....
The above code does the click on link when I click on the button. But my problem now is that I have defined a link as
<a href="mailto:abc@xyz.com?subject=abc&body=email body">email </a>
and when click is called and mailto links opens my email client, it somehow ignores the subject and body parameters of the link. It works properly when i actually click a link element. but it doesn't work when i simulate the click event by code written above. above dispatching event code somehow ignores the link parameters?
View 3 Replies
View Related
Jan 18, 2011
I would like to ask if the following is possible.
1) I have one hundred identical links on my page
2) I have a function that changes a clicked link to "display: none" (using the toggle functioon)
Is it possible for me to set it up so that only the link that is clicked (that is, only one element) gets affected? I don't want to click and have all the links disappear.. just the one that was clicked.Would this code below work in all browsers? [code] And secondly, may I ask whats the difference between $("a") and $('a'). I've seen people use single quotation makrs and double. Which is better ??
View 4 Replies
View Related
Jun 9, 2009
This is just a page swapping images on the mouseover event, but i want to remove the mouseover events from all links when the the on click function is triggered, this is the html code,
View 3 Replies
View Related
Oct 25, 2011
I have a situation where a context menu is being added to the DOM dynamically when a user right clicks on a control on the page. The div that gets added does not have an id set but the div does have a unique class. WhatI need to do is intercept the addition of the div and add a hover affect to some child nodes. Specifically any children that are <a> nodes. So far this is whatI have for adding the hover affect, but i'm not sure where it needs to go or howI link it to the event raised whan a new element is added to the dom.
$(
'div.context_menu_main').find('div a').hover(function() { $(this).addClass('context_menu_hover');
}, function() {
$(this).removeClass('context_menu_hover');
});
I have no control over the div itself as its part of a third party control soI am unable to add an id.
View 4 Replies
View Related
Nov 13, 2011
I've set up two buttons to dynamically load in content. However for some reason the content only loads on the first time you click a button. The transition function does receive the correct variables however. The fade0ut animation also doesn't take affect whilst the replaceWith() function is inside the transition function.
[Code]...
View 9 Replies
View Related
Nov 17, 2011
I have a situation on my website similar to this:
<ul id="menu1" class="menu">
<li>
<a href='javascript:myFunction(0)'>Hello</a>
</li>
</ul>
This makes a link that calls myFunction(0) when I click it. Now I want to add a popup whenever the user clicks the link (but I can't add it to myFunction for some reason), so I add an event listener to this <a> in the $(document).ready() function:
$('ul.menu li a').click(
function() {
alert("hi");
});
Now the the popup does appear, but it doesn't execute myFunction(0) anymore.
So finally my question: is there a way to pass my <a>'s href to this click-function and makes it execute? Or is there a better way?
View 1 Replies
View Related
Jul 11, 2011
I want to execute a function, when a user clicks on a certain button on my page. It works in Chrome, Safari, Opera and FF, but not in IE 9. The jquery-Code looks like this:
$('#mapButton').click(function(event){ ... });
My HTML source code:
<div id="medias">
<div>AUDIO<br /><p id="audioButton"></p></div>
<div>KARTE<br /><p id="mapButton"></p></div>
<div>BILDER<br /><p id="galleryButton"></p></div>
<br style="clear:both"/>
</div>
By Clicking on mapButton the function should follow. I tried it first with the input-Tag, then with the a-Tag and afterwards with the p-Tag. Nothing works at all. I also inserted a return false at the end of my JS function. How to handle it?
View 3 Replies
View Related
Mar 18, 2011
i generated a subnode for all unordered lists which are Childs of List-Elements like this:
<ul>
<li>1</li>
<li>2
<ul>
[Code].....
View 2 Replies
View Related
Jul 4, 2011
In my current work i try to put several links onto an image. I do this with AJAX:
$('.panorama').load("getContents.php", {id : "5"});
This inserts several links into my container "panorama". They look like that: <a class='poi' style='margin-top:141px; margin-left:365px;' href='#6'></a>
The problem is, that a click on those links is not registrated by my java-script
code. I tried it this way:
$('a.poi').click(function(){
var hash = $(this).attr("href").substr(1);
console.log(hash);
if(hash)
[Code].....
View 1 Replies
View Related
Nov 12, 2010
build that js for a drupal module. The function "Drupal.open_upload_modal" is called on every click (alerts), but why is the click event only working once after page load?
<a href="#upload" onclick="Drupal.open_upload_modal();" title="upload">SAVE</a>
// $Id: automodal_upload.js,v 1.1.2.7 2009/12/28 02:21:20 Exp $
(function ($) {
Drupal.open_upload_modal = function(){
[Code].....
View 2 Replies
View Related
Oct 16, 2010
Okay I have a div element which has a click event for deleting it but I also have sub li elements with click events for deleting them, problem is if I click a sub element the click event is also triggered for the parent how can I ensure it only triggers on the topmost visible element?
View 1 Replies
View Related
May 16, 2010
I don't know but I had a click event for a button but it works only once. So if I click that button works, my function works, if I click it again, it doesn't get executed again.
View 4 Replies
View Related
May 24, 2009
I'm new to jQuery. I'm writing some code to show a picture if user clicks on table row. This is the table
<table id="restable" border="0">
<thead><tr>
<th class="cat" width="150"><a href="">Category</a></th>
<th class="brand" width="150"><a href="">Brand</a></th>
<th class="name" width="300"><a href="">Name</a></th>
<th class="weight" width="50"><a href="">Weight</a></th>
</tr></thead>
<tbody id="table">
</tbody>
</table>
The table is filled with this function
function search(sortt,dirt) {
$.getJSON("/jsonsearch.php", {cat: $("select#catselect").val(), brand:
$("select#brandselect").val(), name: $("input#search").val(), sort:
sortt, dir: dirt}, function(j){
$("tbody#table").empty();
var row='';
for (var i = 0; i < j.length; i++) {
row="<tr><td width='150'>"+j[i].cats+"</td><td width='150'>"+j
[i].brand+"</td><td class='name' width='300'>"+j[i].name+"</td><td
width='50'>"+j[i].weight+"</td></tr>";
$("#restable tbody").append(row);
}})
This is the function I put inside $(document).ready()
$("#table td").click(function(){
alert("jhgjgh");
});
The problem is that click event doesn't fire. If I get it working, how do I get the contents of the row that user clicked. I need Name from that row.
View 1 Replies
View Related
Jan 7, 2010
i'm appending a child div in a parent div. parent div has alreadychild div's which have classes ws_c1 and plus.
$
'<div></div>'
.addClass
[code]....
View 2 Replies
View Related
Aug 23, 2011
I know that it should work in those browsers, so hopefully someone can tell me where I'm going wrong.I created a function....it does not sit inside the document.ready function, so maybe that is part of the issue. I am not sure how to accomplish this another way. Wasn't sure how to pass an argument to the function using an anonymous function in document.ready. The idea is to have a side navigation panel that shows/hides divs on the page. I am creating a website for my upcoming wedding and want to do it all on one page and just fade in the divs. If I click on 'ceremony' for example, I want it to hide any open divs, then show the ceremony div. For the divs I always want on the page, I gave a class of 'static.' That is the reason for the 'not' condition in the code. I hope I have explained clearly enough. Here is the code,Btw, this does work in firefox6 and ie9 without issue.Here is the javascript:
function showDiv(showThis){
$(this).click(function() {
$('#containers > div:not(.static)').css('display','none');
[code]....
View 3 Replies
View Related
Jun 16, 2011
I have this code where takes the page a few seconds to load the page up.. in the meanwhile there are some links that I don't want any one to click..
View 1 Replies
View Related
Sep 21, 2009
I have 2 div with the same id, and i call a function onmouseenter. It works very well across all browsers except IE7 where the first div work but the second one does not run the function.
[Code]...
View 1 Replies
View Related
