I am trying to figure out where I went wrong in my code. The objective is to display all lines of the song using a switch statement. I thought I had my head wrapped around it, but apparently not.
View 3 Replieshow to display images according to switch statement value...
for example if case value is rose it has to display rose picture that is stored in our system.
I'm trying to code a script that will display an approximate postage price based on different combinations of variables, but the numbers I defined for each case aren't reflected in the text box. I'm using a switch statement for all the different combinations of options, which the user will choose by selecting check-boxes. (Additionally, I know that this code probably isn't a very efficient way of doing what I'm doing - how to improve it.) I've attached all the relevant parts of the code, including how I defined variables originally.
<script type="text/javascript">
function count(){
var firstclass = document.calc.firstclass.value;
var postcard = document.calc.firstclass.value;
var numpages = document.calc.numpages.value;
var nms = document.calc.nms.value;
var large = document.calc.large.value;
var numpages = parseInt(document.calc.numpages.value); .....
This is my first time using the switch statement. I would appreciate your suggestion on how to do this properly. I am trying to get customer age which is (age) and compare it with the monthly rate then the text msg will display in the textarea. Also, I am having trouble figuring out how I can defined my monthlyRate in the switch or do I need to this outside of the switch? Code:
}
Is it possible to create a Switch Statement in a URL? If so, how? This is what I have so far:
<html>
<body>
<head>
<center>
<Script Language="JavaScript">
function load() {
var load = window.open(http://www.xxx.com/123456789,'','scrollbars=yes,menubar=no,height=600,width=800,resizable=yes,toolbar=no,location=no,st atus=no');
// -->
</Script>
</head>
<br><a href="javascript:load()">Link!</a>
<br><br>
</body>
</html>
Assignment:
Switch Create a HTML that uses Javascript. Create a page that tells a student the range their mark falls in if they know their letter grade. Below 50 is an "F", 50-59.9 is a D, 60 - 69.9 is a "C", 70 - 79.9 is a "B", 80 - 89.9 is an "A" and 90 - 100 is an "A+". You determine the input and output format.
<html>
<!DOCTYPE HTML PUBLIC "-W3CDTD HTML 4.01EN">
<head>
<title>Switch</title>
[Code]....
I need to write the switch statement below in a way where I can have each case with multiple values, and avoid using "break;" to allow the evaluation of the rest of cases. the code below should jump into the first 2 cases but not the last one, but it is not doing that. Is there a way for me to get around this.
function test(){
var Temp = 'cs1'
switch(Temp){
case 'cs1' , 'cs2':
alert(Ƈ');
case 'cs1':
alert(ƈ');
case 'cs2':
alert(Ɖ');
}
}
I've created a jQuery script that uses a switch statement. However, my experience with it, relative to variable scope, doesn't seem to follow the logic.According to the JavaScript/jQuery theory, a global variable was accessible (meaning read & write) throughtout any function within any script (one that page).However, apparently that theory wasn't completely true as it pertained to switch statements that contained variables. To illustrate my case in point, I've included a simplistic version of my code:
$("#selector").delegate("div", "click", function(event) {
var testVar = 4;
switch (this.id) {
[code]...
As shown, the variable "testVar" is not accessible from one case to the next case .Furthermore, to add insult to injury, I am seeing the same behavior within the conditional if else statement counterpart to the switch statement.
how to get this functionality going. I have a div name "footer". Within "footer" I have 4 links:
link1, link2, link3, link4
Is there anyway to write a function which will sense which link was clicked and then alert the id of that selected link. I have written the code but am not certain why isn't it working. here is my code.
$('#footer a').bind('click', function(){
//alert($(this).attr('id'));
var mId = $(this).attr('id');
switch(mId)
[Code]....
Im creating a switch statement for this case, but dont know how to start - Create a Switch statement that tests the value of the partyType parameter. If partyType equals "D", store the following text string in a variable named barText: <td class='dem'> </td>
If partyType equals "R", barText should equal <td class='rep'> </td> etc.. So since its going to test the value of the partyType parameter, and store the text string in a variable named barText do i begin like:
[Code]...
i would like to check for the window size with jquery and based on the different resolutions i would like to change the background image. So i was thinking to somehow use the "switch" statement for more cases, but i just don't know how this would look like. This is the basic structure i want but with more options:
if ((screen.width>=1024) && (screen.height>=768)) {
//do something
}
[code]....
for(var i=0;i<document.all.elements.length;i++){
alert(document.forms[0].elements[i].id);
}
This code displays the ids of only controls in a form, but I'd like it to
display ALL items. For example, not just the ids of buttons, inputs, etc,
but any <span> elements as well. Is there something I could replace with
the "elements"? I tried tags but that doesn't work either.
I'm using a javascript file to switch out items when a thumbnail is clicked. This includes photo, title, description, price, size, quantity and add to cart button....
The original code on the html file works fine, but as soon as it is swapped by onclick, the 'add to cart' button does nothing! code...
and that adds the item to the cart just fine, but when a thumbnail is clicked on, activating the javascript file to switch out the item/elements, the 'add to cart' button no longer does anything... by the way, I am using simpleCart.js.
I have done this so far, I don't really know how to assign the else statement in queries and I am not sure for js as well. Those are the files and what I have done.
Main page:
Code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "[URL]">
<html xmlns="[URL]">
<head>
<script type="text/javascript">
function showUser(){
var t=document.getElementById("type"); .....
The page with data:
Code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!--#include file="Connections/sqlconn.asp" -->
<%
Dim sql
Dim sql_cmd
Dim sql_numRows
------if(t and c and r){ .....
How do I write an If statement to display a popup stating "Please display a numeric value!" if the value entered into a text box is text and not a number?
View 1 Replies View RelatedI've got an annoying non-working bit of code:
<div id ="messageDiv" style="display:block;">No profile information entered yet</div>
<script type="text/javascript">
function profileInfo() {
var m1 = document.getElementById("marital1").innerHTML.toLowerCase();
var b1 = document.getElementById("bodytype1").innerHTML.toLowerCase();
[Code]...
The first part up to before the 'else if' works. but if the 'w1' has [URL] it still doesnt return true and display the DIV block??
I am using javascript to switch between a series of divs, on clicking a navigation tab the divs display property is set to 'block' and all other divs have their display property set to 'none'. That works fine, the problem I have is when I redirect to another page (e.g. a PHP script) on return to the index the divs have reset and only the default div is shown, rather than the div that was showing when the user left the page. The solution, as I see it, is two stages: Write a function to display the relevant div based on the variable passed to it, then work out how to pass this variable around various pages (post/get). I am very inexperienced with javascript and it drives me mad that the script literally does nothing rather than throwing up an error (as in PHP) but this is what I have so far in terms of a function:
[Code]...
I have been looking for the answer for a long time, but could not reach to any answer. I am a novice web designer, have very little knowledge on web programming. I hope someone here could help me with the following. The problem scenario is this:
I have a webpage where I have listed some classical songs so that page visitors can listen to song online. All files are in Real Audio format either with .rm or .ra extension. These individual audio files are linked with .ram files so that when visitor’s clicks on the song title, this .ram file launches RealPlayer and the clicked song starts playing. Once a song is played it stops. If user wants to hear another song, user needs to click on another song title to play that song. This is annoying for users.
However, I have seen on some websites where user can select the songs by clicking on the “Check Boxes� next to each song titles and play by clicking on the “Play� button. Therefore, user can select lists of their favourite songs by clicking on check box and play these together one after another. There are two other buttons also available for users: “Select All� songs and “Reset�.
I am trying to use a linked list to add a song. 'A' is supposed to add the song to list of objects. My problem is that every time I append a song again it seems my list gets reset. Also on the side. How come I cant use the showFromMeOn method down in 'P'?
[Code]...
I have a navigation link ("galleries") that 'onclick' displays a sub-menu of other links (the specific galleries).
This is on the home page of my site.When a user first views the home page, the sub-menu does not display, until they click "galleries".
On other pages of my site, the "galleries" link is one of the options in my navigation. That link takes users back to the home page which is what I want it to do.But what I'm looking for to happen is if the user is directed back to the home page from within another page on my site, I'd like the link on the homepage to automatically display the sublinks under the "gallery" link.This is so that users don't have to click "galleries" twice in order to see the submenu.
For example: If a user is on the 'about me' page, in the navigation there is a 'galleries' link. If they click it, it takes them to the home page. They would then have to click on 'galleries' again on the home page in order to display the sub-menu of individual galleries.I want them to show up immediately, but only when directed back to the home page from within my site. I think I do that with an 'if' statement, but I'm not sure of the syntax.
To recap: I've built a music jukebox on my experimental website, url removed. Each song in the Jukebox has it's own html file and in that html file a few things are done to run the song in the jukebox. The type of media player requested by the user is determined. Then, that media player is activated playing the song requested. After the amount of seconds needed to play the song have passed a function then calls the next html file which will then play the next song. When any html file for a song loads, the <body> tag reads:
<body onLoad="setTimeout('delayer()', 413000)";>
In the above code the delayer() function (below) is called to open the next html file which will play the next song ("SunrEyes.html" in this case). But first, using the javascript setTimeout() function, 413000 milliseconds (or 6 mins. 53 secs) must pass(in this case). This is the length of the current song being played.
[Code]...
This may seem like a very strange question but is there a way to change to a random song in itunes using javascript?
View 4 Replies View RelatedI am using XSPF Web Music Player slim, and whenever I put it into a web page and play it using Google Chrome or Safari the song starts playing twice. When i press the pause button one instance of the song keeps playing while the other keep going without any control over it. This only happen on Google Chrome and Safari on both Windows and Macs so I think it is a problem with the player and WebKit.
I am not using play-list file because the player is only playing one song so I used some parameters somewhere for the player making it so I did not need a play-list file. I also wanted it to play automatically so included a parameter for that. This is my code:
<object type="application/x-shockwave-flash" width="720" height="30" data="xspf_player.swf?song_url=song.mp3&song_title=Song Name&autoplay=1">
<param name="movie" value="xspf_player.swf?song_url=song.mp3&song_title=Song Name&autoplay=1" />
<param name="wmode" value="transparent" />
</object>
I have the autoplay=1 so it will play automatically. When I take this away it only play one instance of the song but requires manual play. So you have to push the "play" button. How do I fix it so it does not play the song twice on Chrome and Safari?
We have a master list of hundred songs we can draw from in our database. I have already created a php / mysql / ajax (maybe not needed here) combination which populates the page with a table of a master list of items. Currently when the worship leader clicks on the name of the song it is moved to a new table, and then that list gets placed in a database and emails get sent to the appropriate people.
Two things I can't quite wrap my head around:
In the master list I would like to be able to get jquery to filter the master table by letter. i.e. songs starting with Q only with the added ability to show all again... Of course if the last song with Q was just selected the list should automatically go back to showing all. I was doing this with Ajax, but feel this is a waste as jQuery can handle this directly. After the list is in the new table I would like to be able to do something like: [URL].
i m using tis embeded media player in my web. but, how can i provide checkbox for each song and then let the user play the multiple songs together using tis code? the music file format are .wma, .mp3 or .midi..
<embed type="application/x-mplayer2" id="music1"
pluginspage="http://www.microsoft.com/Windows/MediaPlayer/"
src=""
name="MediaPlayer1"
[Code]....
Is it possible to create a loop using code to play a song on a webpage? Or does the while statement have to produce numbers like 1, 2, 3? I don't really understand what types of things I am allowed to use when creating a loop.
View 2 Replies View Related