Check Row By Clicking Function Is On, The Checkbox Stops Working?
Dec 2, 2011
I'm trying to create a demo to display a new way of showing our data.I thought I remembered this being pretty simple but I'm hitting a snag. The table, the mouse over, and the check row by clicking on the row all work separately but when the check row by clicking function is on, seen in the first row, the checkbox stops working.
I have a table with a SAVE button on each row (id=SaveBD)...but I also have aSAVE ALL button at the top. It works pretty good except the .each function seems torandomly stop near the end ofthe row countand not save all the rows.that would cause the rows to stop saving?
I have been working on a JS program that will, among other thing, allow users to search for downloads, articles, videos, etc, by selecting various checkboxes grouped under different fieldsets. Basically, when a user selects a checkbox, the pages sends an xhr request to the server and returns a specific set of search results at the bottom of the page. If the user selects a second checkbox in the same group, the previous results are deleted, and the new results are added to the page. The same happens when a user deselects a checkbox and there are other checkboxes within the same group that are still selected. The problem I run into is with real-world users who most likely will not be patient enough to wait for the results for the first checkbox to load before selecting a second checkbox. The result of this is that the server quickly becomes overloaded with requests, and old results are not deleted, or new results aren't even added properly. Basically, I would like to group the checkboxes in such a way that the browser waits until the user stops selecting or deselecting checkboxes before sending the request to the server.
As you can see from the code segment below, when the user selects a checkbox, a loop checks to see if any other checkboxes are selected, and then accordingly adds their values to an array. I have tried using setTimeout() to control how this works, but to no avail.
Code: addResults: function(inputCheck) { // reference to keyword array created in the clickListener function var keyword = GroupPlan.keyword;
I have a webpage with a single form. Under that form I have two separate lists of checkboxes. One set is called eventList the other is assigneeList.I have added two other checkboxes, one is as follows,
What I want to do is, check all the assigneeList boxes with the same value as the checkAllDelegates checkbox. And the same go the other set respectively.Through rummaging around I came up with the following,
My website is all up and running and I decided to put a new image viewing script on, I already had a revolving image script showing all my previous work before but the latest script has totally stopped the previous from working. You can view what I mean at www.actioncomputing.co.uk
I am using 2 scripts both available on Dynamic Drive they are
I have a simple function for an intranet site that should make and return a XMLHttpRequest object in most browsers (including IE8):
function createXMLHttpRequest() { var xmlhttp = false; if (window.XMLHttpRequest) { xmlhttp = new XMLHttpRequest();
[Code]....
Then I use it autocomplete a input text with a list of client company names from a database. Then the user selects a company and it reloads the page with that company's info. (The ajax input text box remains so the user can type in another company name)
In firefox this works fine. However, in IE8 the very first time the page loads it works fine, but after the user selects a company and the page reloads, the ajax longer works. It gives an error at "xmlhttp = new XMLHttpRequest();" saying: "Message: Object doesn't support this property or method"
If I type anything in the input, it gives the error: "Message: 'searchReq.readyState' is null or not an object" leading me to believe that somehow after the first time the page loads, IE is not able to process a XMLHttpRequest which seems unlikely, so I'm not sure where to go with my code. I've tried a bunch of other similar createXMLHttpRequest() functions, but they all have the same problem of working once then not working after.
WhenIrun the below code above the init code for jQuery plugins it stops them working. Im just trying to run the code after the DOM has loaded, is there a better way? <script type="text/javascript">$(document).ready(function() {
// The gallery is hidden so need to unhide it. document.getElementById('verticalCarousel').style.visibility='visible' }) </script>
I have four scripts being called to my page however i have two that isn�t playing nicely. The two in question is Fancybox and the Nivo Slider. The slider and fancybox both work alone but not when they are on the same page, however the slider will stop working when
Code:
Is used and nothing changed when i apply it to Fancybox instead. I have tried wrapping and dividing the scripts with
Code:
But nothing. I have also changed all
Code:
To
Code:
On the slider but again no change.
Here are the scripts in my <head> :
Code:
The problem mostly is that the slider won�t work in no conflict mode but won�t work with Fancybox either.
I have my doubts if this question belongs to the javascript side since it's all good until the data from MySQL comes in, but since the javascript is the one breaking I'll take my chances.
The external js (portada.js)
Code: $(document).ready(function(){ var currentPosition = 0; var currentPosition2 = 0; var currentPosition3 = 0;
[Code]....
As you can see I have three divs with different slideshows (slideshow, slideshow2 and slideshow3), they have products that slide to the left. When I was testing to make sure it all looks good the sliding feature was working fine, but I lost this feature when the data was being retrieved from MySQL (at the moment on <div class="slide">).
Alert 1 is to check if the program enters the function. And it does in all browsers. But when it comes to alert 2, Firefox does not execute the alert. So I assume there is something wrong with firefox executing the onreadystatechange. By the way this is the code for initAjaxObject()
I'm trying to use the cascade function from the below link. If I try it as it is there, it works, but if I change the jquery reference to the one I'm using (1.7.1) it stops working... is there a diferent way to use that ajax call or am I missing anything?
I have several ajax calls that originates from the same page its updating. It works perfectly in firefox but in IE it works for about 18 requests and then just stops until the page is refreshed. I thought it was a cashe issue but I have added a variable for that. I think it may have something to do with binding but I am not sure how to sort that. This is one of my functions.
I've got a table where I want to be able to click a row in order to check the box at the end of the row. I've got it working using this....
Code:
I then simply call the rowcheck function with the check box ID. The problem is, if someone directly clicks on the check box it doesn't work (presumably because they are checking the box and the code is unchecking it again).
How can I get around this to make sure they aren't directly selecting the checkbox?
I have a webpage where i load eachdifferentcontent through a function load and after i load that content a problem with jQueryoccurs...if i go directly to the page where i have the "datepick" without load the content it works, but if i load some content stops working...
$(document).ready(function(){
If you want to try it live to understand what is happening here is the url: [url]
When you open the webpage if you click on the textbox it will show the calendar, but if you navigate on the right menu and then press the text box won't work...
I want to keep a fieldset hidden with Javascript and slide it open when a user checks a box to indicate that this fieldset is relevant to them. I'm fairly sure that I have seen this done in some forms.
I have begun to look through the docs, tutorials and some of the plugins listed under "forms", but I am not 100% sure exactly what to look for or exactly how I would use it if I found it.
I have the "master" checkbox. When clicked it should check all "list[]" checkboxes. When removing the check from "master" checkbox it should remove checkboxes from all "list[]" checkboxes. What asm I doing wrong with my code?[code]
I want when checkbox is checked, the span will have 500 USD. When checkbox is unchecked the span will return 0.This is what I've got, have no idea why not work.
Code JavaScript: if ($('#priority').is(':checked')) { $('.presult').text('500 USD');
I have a asp.net gridview wich has checkboxes for user selection. What I want to do is retrive the value of a cell when the user clicks on the checkbox