I have a form that has 3 inputs for the phone number (XXX) - (XXX) - (XXXX)
how can I get the number boxes to work so that as the user is putting in their number is automatically goes to the next box? For example, when I put in my area code "909" I have to TAB or click into the next box. How can I make it so it automatically goes to the next box?
I'm trying to do autotab from a textfield to a checkbox . but it is not working . Here is my code
<html>
<head>
<title>Check Box</title>
[code]....
I have a point where the user will get an overlay div, to keep this div centered I move and mess with the CSS property "top". Though, I was testing and when I tabbed into the following textfield, it pushes the div down - as if there is text in the .val() field. (so it keeps going to the "else" statement even just tabbing INTO the field).
Does anyone know how to fix this and keep it from pushing the div down just from tabbing between textfields?
Code:
On blur of field1, field2 is set to READONLY but the cursor on my page then defaults to field2 and the cursor is at the END of the value and when the user clicks the backspace button the value can be erased. I would like the ability to have the cursor move to the next NON-READONLY or ENABLED field on the page. Is that do-able with jQuery?
[Code]...
Does anyone know of a way to prevent tabbing (via keyboard tab key) between form fields in ifferent "slides" when using the jquery scrollTo plugin? For example, I have a UL with 2 LI's in it and each LI has a <form> inside of it. If a user is on slide 1 and hits tab on the last visible form field, the first form field on the next slide comes into view (because the browser gives it focus), thus moving slide 2 partially into view. The same kind of thing happens from slide 2 to slide 1 when shift-tabbing (tabbing backwards): a form field on slide 1 gets focused and comes into view. I'd like to prevent tabbing between the forms. To complicate matters a bit more (possibly), one of my forms has a jquery UI tab control on it, so the last visible form field could be any field on any of the tab control's tabs (ie: the "last" visible form field depends on what tab is showing.
View 3 Replies View RelatedNot sure if this is the most appropriate forum, but I'm a jQuery newbie, so figured I'd start here. I put an accordion control on a web form, which seems to be working great!
[Code]...
The users tend to tab through the form. But when they tab to the end of an accordion section, the focus goes back to the top of the page. Is it possible to go straight to the next section of the accordion?
Using the very basic jqModal example, isn't it supposed to auto size and auto center the modal on the page? I placed a table that was wider than the modal's default settings and it's off the page and does not create scroll bars on the page to see the hidden section of the modal.
The default class is
Now, I know I can change the width of the modal but what about the positioning?
I don't know if this can be done in Javascript, or requires any other language but i was wondering if this would be possible.I would like to embed this Javascript code in to a PHP file and then for it to run automatically upon the PHP file loading:
<td class="smallDesc"> <a name="fb_share" type="button_count" href="http://www.facebook.com/sharer.php">Share</a><script src="http://static.ak.fbcdn.net/connect.php/js/FB.Share" type="text/javascript"></script> </td>
[code]....
I have a nice little Javascript that capitalizes each field in my form
submissions. It looks like this:
<cfscript>
function CapFirst(str) {
var result = Trim(str);
var wordCount = ListLen(result," ");
var ProperString = "";
for(i=1;i LTE wordCount;i=i+1) {
ProperString = ProperString & " " & UCase(Left(ListGetAt(result,i,"
"),1)) & LCase(RemoveChars(ListGetAt(result,i," "),1,1));
} ProperString = Trim(ProperString);
return ProperString;}
</cfscript>
Then I display the results as follows:
#CapFirst(Session.Customer.FirstName)#
It works fantastic, except for some reason on my final form submission,
if someone enters an apostrophe in the field, it wants to repeat it 8
times. So the name "O'Brien" will look like "O''''''''brien". I can
live with the second character being lowercase, but the repeating
apostrophe's have to go.
I have been looking for a way to open a PDF file and automatically
locate and go to a certain phrase within the file. The phrase should
only appear once within the file, if not, the first occurrance is all
that is needed.
The file is needed to be opened from a website, into a new window. As
it is opened, it needs to be sent the key phrase that it is looking
for. I have no trouble choosing what phrase on the html side or
opening the pdf file on its own. Note that the opening and finding of
phrases would be done with Javascript on the html side.
Essentially what I am looking for is for the user to be able to click a
link on the website. The site would open up the new pdf window
containing the file and is automatically at the spot where the first
phrase appears in the pdf.
However, I do not wish to attach any Javascript to the pdf file itself.
The file may be changing over time by other users who may not have the
expertise to deal with the javascript adding. At the moment, the
original file is created in word and then transfered to PDF. So the
PDF file name stays the same, as well as its location which would be in
the same directory as the html file that links to it. But the contents
of the PDF may change over time so I cannot add a Javascript to the pdf
file.
Note that it may be possible if neccessary to add Javascript to the
PDF. I may be able to get the users to edit the file in PDF mode but
that is not a given.
I do not want a pop up window such as in the find option for the user
to press before coming to the right location unless any other possible
solution is not available.
In IE when autocomplete is working and the user picks the drop down in a Input text box, the password will appear giving the user quick access to the next step. But the cursor should occur to the right of the inserted "*"'s in the pasword box. But for me my cursor is just sitting at the end of the Input box I mentioned. I would like the cursor to sit at the end of the "*"'s in the password box.
I tried disabling the Input box and all that did is crash Internet Explorer plus it didn't put the cursor at the end of the "*"'s in the password box anyway. Any suggestions how I can get what is normal in this case?
I have a website on angelfire and they give me little access to the cgi-bin cause its a free site but they do have a form_handler_file & a form_handler_mail that i can use so there isnt much room to work with the only thing i did not like about it is that all the new additions to the File were at the bottom of the page instead of the top, so with the addition of this onload script, all is well.
<body onLoad="javascript:scroll(0,99999999999999999)">
It took exactly 17 9's to be compatible with firefox & IE and still scroll to the bottom of the page no matter how long the document was. I also put the page within an <iframe> so there is no problem on scrolling all the way back to the top just to navigate.
BTW i use the form_handler_file to make a news post so i dont have to always edit the news page and upload it everytime i have some new news to add.
I have a drop down box with 5 values in it. I am trying to figure out how I can make it so that as soon as a user selects a option from the drop down, it will load a certian page. With out them having to submit a forum. Can this be done.
View 2 Replies View RelatedDoes anyone know how I can have it so when a user types in one box, it will auto tab to the next box when that box has been completed or reached its max length.
View 1 Replies View RelatedI have ran into some sites that must have an AUTO bookmark feature. After I visited it added a bookmark automatically. It only worked in IE 5.5 Do you know a script to do this if so where can I find a way to stop it.
View 2 Replies View RelatedI have a drop down list and i want each time i select a value to get redirected to that page.
View 1 Replies View RelatedI have 2 input box on my form...i would like input box #2 to be
updated automatically onces data entry in input box #1 is completed.
I would be greatful if some could guide me through this. I'm a php guy
with little javascript knowledge.
For instance, Box A has a blank entry and I enter in 5. Box B I enter in 6
so in Box C it should automatically give me 11 (if the code I put in is to
add box A and B). Then in Box D I put in 3 (say to subtract from A and B
combined) so then Box C adjusts to give me 8.
Don't worry about the math as that's all taken care of it, I just need to be
able to know how to update on the fly like this.
Situation :
- A form (method : POST, action : itself, onsubmit : alert 'Submit' )
- Got 2 submit button ( 'Save' , 'View')
- Got navigation 1|2|3|4
What I want to do :
- Once clicked on the navigation page, it will save the page without
need to click on 'Save' button. Currently, if i manually clicked on the
'Save' button; it will save the page.
What have I done :
- tried using js form.submit(); not submitted coz no alert comes out
- tried using js button.click(); submitted coz got the alert, but it
didnt trigger the function to Save the form.
The code :
I have a registration form for classes. Each class has a fee. I have a
drop down box whereby the user chooses his class. There is a textbox with
the associated fee. I would like to auto populate the fee textbox depending
on what class the user chooses. In the email, the value of the drop down
box has to be the name of the class and the value of the fee text box has to
be the fee. Can someone please help me in accomplishing this?
I'm quite new at Javascript and I'm trying to create a script that will save me a lot of time when creating my website. I'm gonna try to explain what I'm looking for by taking a simple example. I have a page 'Portfolio'. On this page I have thumbnails of my work. 'OnMouseOver' will have the bigger version of the image appear on the screen (no need for a click). The images are named 1001, 1002, 1003, etc. The thumbs are named 1001_th, 1002_th, etc.
When I click on one of the thumbnails, I want the page "Details" to open, on which only the picture and the description is different for every project. The rest of the content will be the same every time. What I am trying to do is avoid having to create a page "Details" for each one of my projects (up to 100 and growing).I figure there must be a simple solution to 'take' the number of the picture and put it in a standard "Details" page.
I am appending an image via Javascript but IE6 will NOT consistently resize the image to its natural width and height. The exact dimensions of the image vary but are always 100x100 or less.ave tried using CSS like {width:auto;height:auto;} but this is not reliable. I append "?" + now.getMilliseconds() to the image SRC to prevent the browser caching it (because the image can change but the filename doesn't). If I omit this query string, then IE6 seems to resize the images correctly.I also have to float the image and I've noticed that removing the float fixes the problem. I tried to use display:inline instead of float but it didn't work.
View 8 Replies View RelatedDoes anyone know of the coding he used to get his pages to load like they do (auto scrolling right) I would like to do this with a site I'm building but vertical.
View 19 Replies View RelatedHow to make a form that automatic tab when we paste something into the box and sort it out automatically. Like cd-key box. When we copy n paste cd-key into the box it automatic inert everything into correct places.
View 3 Replies View RelatedI am looking for help creating javascript auto-apearing box, which will appear when someone onmouse on the hyperlink.
View 10 Replies View RelatedBelow, how this can be achieved it(here [URL]?
<ul id="nav">
<li><a href="#1">his is a long piece of text which will need to be truncated.</a></li>
<li><a href="#2">This is a long piece of text which will need to be truncated.</a>
[Code]....