I have this code below when I asign strOldTkinit = strNewTkinit and
then read the new value for the strNewTkinit from the recordset the
strOldTkinit changes the value also. So when I run my comparison the
values is always equal even though I read a new value from the
recordset. Code:
I'm using CDO to send information by e-mail to the users of an intranet system.
By embedding a asp page via objMail.CreateMHTMLBody, I can send them dynamic content like info on db..
The point is: Since I tested and realized the embedded page can't perform a recordset to populate itself with db content, I'm sending this info as parameters and retrieving at the embeeded page before beeing attached on e-mail by quesrystring.
The tests I'm doing is gathering info from recordset (on a CDO page) like this:
Do while not rsemprestimos.eof Code:
The correct syntax for an array literal would be:
this.managers [ "DOE, JANE", "DOE, JOHN", "BUSH, GEORGE W" ];
(which works)
My questioin is, how do you recreate this same syntax pulling from a
recordset containing over 3500 records such as:
aManagerName = "DOE, JANE", "DOE, JOHN", "BUSH, GEORGE W", etc...
because
this.managers [ aManagerName ];
(does not work)
I have a list of products where they have minimum quantities in a hidden input. Some products have multiple colours, though the same minimum quantity and I'm trying to implement a jQuery check that entries made are at least equal to the minimum.
Blank or '0' entries are fine but if it's below the minimum quantity it should set to the minimum.
HTML:
Is there something obviously wrong with this? It isn't performing the minimum check and I'm really not sure why.
In part of my form, I have 3 inputs (one textarea and two text inputs),I am validating their value format using AJAX (each input triggers error message on its label in case format is wrong). Also I have one button, "NOT submit button" (type = button).Now, when clicking on the button it must enter the value of those three inputs in my database in case they are true then all inputs values must be cleared. In case AJAX validation is wrong and in case the user clicked on that button, the value of fields must kept as it is.
Actually I can not use submit button because I have it for the whole form and what I am taking about is a part of the form and it's not possible to make nested forms as I know it violates html rules. It's easy to make it if I am taking about submitting button as I can view session values on fields after submission in case ajax returns error.I can clear inputs from Javascript, but it will be cleared on both cases if AJAX validation true or wrong. Each input field has AJAX Error message that will be triggered when the input format is wrong.
I have a form that gets values that a user has selected from a list menu field, that end up like this added to the URL:[url]
Instead of the Field being mentioned more than once, how can I have it where it could mention the field once with the values coma separated eg:[url]
Would I use JS to change the URL? or VBscript?
I built my company's website and the content portion of the site uses
text with styles with relative values and the navigational part of the
site uses text with styles with absolute values. The purpose of this
was so that the end user could increase the size of the text on the
webpage and only the content portion of the page would scale or resize
but the navigation would not. This works as expected on a pc but the
entire page scales on a MAC. Does MAC not support text with styles the
same as pc so that the only scalable text is that with relative values
(ie: small, x-small, medium, large, etc)? Absolute values conist of
point sized text. Code:
How to process textbox values/ call textbox values in JS through a Java program.My text box values are dates. I have to process these dates. Like in online banking we select day to know our transactions. After submitting we get results. remember my files are in my directory only. No need of database. My files are look like 20100929, 20100930, 20101001
For epoch_classes.js, epoch_styles.css u can download coding from this link : http:[url].....
Code:
<html>
<table width="900" border="0" cellpadding="10" cellspacing="10" style="padding:0">
<tr><td id="leftcolumn" width="170" align="left" valign="top">[code]....
In my coding, ys, ms, ds represents year starting, month starting, starting day...ye, me, de represents end...start,end gives file names in the format of yyyymmdd.now i want to process files from 20100101 to 20100930
means from date is 2010/01/01 and to date is 2010/09/30
if i press submit button the files from 20100101 to 20100930 are processes
here ys=2010 ms=01 ds =01 and ye=2010 me=09 de= 30
For this how do i call these textbox values (from date text box and todate) to another program (java)
function read()
{
var numbers = new Array();
for (i = 0; i < field.length; i++)
numbers[i] = document.test.checkboxName.value;
var counter=0;
[Code]...
I want to read the values of the checkboxs and store the vlaues into an array (there are more than 1 checkboxs) the form name is text and the names of the check box = checkboxname
I am doing an application with two dropdown boxes.Once we change the value of first drop down using database values ,the values in the second drop down should change..then click on done it should display the data from databse.. first dropdown :contains country names second dropdown :contains city of particular country..My problem here at is displaying values on second drop down based on first drop down selection:
View 7 Replies View RelatedI have a bunch of checkboxes like below that the user can check some or all and click the button and see the values of all the selected checkboxes. How can I do that?
Code:
<script>
function alertValues(){
}
</script>
<input type="checkbox" class ="normal2" value="131971" name="list[]" >
[Code]...
I need to get the values of two hidden fields and values that make a query in my database and return this column to a text field in the same form, I have already informed the forum here that can do that with Ajax, researched and made an example But it is not working.
I am sending the code below:
I have the following array:
I would like to add up the common values so add all values of Android into one array so it becomes something like this: [["Android", 92]....]
I have 4 text boxes that are supposed to load 4 seperate values of data from one field in one table from a database. The field is called interface_cropsettings (from the interface table) and these values have been concatenated and comma seperated in this field.
Code:
Once the form is filled out and saved, the data is inserted into the database and the values from these 4 text boxes are concatenated, comma seperated and inserted into that one field correctly.
(Example)
If the 4 text boxes have the following values:
In the database field they become:
However, if the form is closed and then re-opened, each text box displays the entire database field rather then each value seperated in the corresponding text box.
(Example)
All 4 text boxes display this:
I already know why the data appears like this in the form, my problem is that I'm not sure how to write the javascript to seperate the values into the correct corresponding fields, assuming javascript is what I should be using!
Also, this is kind of irrelevant but just in case you're wondering, this form is part of a cold fusion application!
What's a good way/ideal data structure to achieve this?
The objective of the code/function is to map user-inputted strings into a pair of specific, hard-coded strings. For example, say the user types "firefox" or "ff", or "fx". The output would be the pair ["browser", "mozilla"], for example.
I'm currently using a multidimensional array, but it feels inefficient and I'm having trouble mapping an arbitrary number of inputs into 2 outputs.
How should I map the elements ["input1", "input2", "input3"] => ["output1a", "output1b"] ?
Another method I used previously was a massive switch statement. This fulfills my needs, but I'm not sure about the efficiency (though if I remember correctly, switch statements become more efficient as size grows, since it uses a hash table?).
switch (input) {
I have 4 text boxes that are supposed to load 4 seperate values of data from one field in one table from a database. The field is called interface_cropsettings (from the interface table) and these values have been concatenated and comma seperated in this field.
Code:
Once the form is filled out and saved, the data is inserted into the database and the values from these 4 text boxes are concatenated, comma seperated and inserted into that one field correctly.
(Example)
If the 4 text boxes have the following values:
In the database field they become:
However, if the form is closed and then re-opened, each text box displays the entire database field rather then each value seperated in the corresponding text box.
(Example)
All 4 text boxes display this:
I already know why the data appears like this in the form, my problem is that I'm not sure how to write the javascript to seperate the values into the correct corresponding fields, assuming javascript is what I should be using!
Also, this is kind of irrelevant but just in case you're wondering, this form is part of a cold fusion application!
I've got two select boxes with same options and same option values on my page, i want that whichever options a user selects from first box, should also get selected in second box. I need to get this done in Javascript or without using advance jquery methods.
Please suggest me is there a way to do this?
Is it possible to use a function to pad option values in a drop down
box? I need to pad 5 values in a drop down box 15 characters with balnk
spaces then add a "1" on the end.
How do you add up all the values in an array? The length of the array is variable. Is there a built in function?
View 7 Replies View RelatedI have a form that has many text boxes that the user enters the
quantity of an item. Each item has a unit value.
How do I display on the page the total value of each item next to each
text box as the user enters the quantity in each text box in turn.
I feel the "onblur" event may be the event to use for each text box but
can't seem to get the calculated value displayed on the page.
I have a form where I have embedded a table. Inside a column in each row is a checkbox. I want:
A) to get the values of the checkboxes
B) to count the total amount of checkboxes (which are selected)
Basically after using
$('#myEl').css( { 'top' : someValue + 'px' } );
And then using
alert( someValue + '!=' + $('#myEl').position.top ),
The 2 values are not the same.
I've tried just increasing the value of "someValue" to fudge the required "top" value, but that doesn't get me where I want either.
I'm writing a twitter plugin, so far so good, works perfect in FireFox, Chrome ... but in IE i get NaN value...
Here is a working version: [url]
If you go to the networks section in FF it displays correctly (latest tweets) : 16 hours ago (Monday 21st December 2009 @ 0:09)
In IE8 it shows: NaN years ago (undefined NaNth undefined NaN @ NaN:NaN)
Here is my code :
I have a javascript that will take whatever was entered on this form and send it to the new URL (without submitting), but for some reason - it doesn't work anymore. i've changed things around, & probably messed soemthing up.
Code:
$('#cb_ht2').click(function() {
// Reset incase Data Changed[code].....
I think i may have messed it when when adding that target-"_parent", it needs to pop a new window
I am defining hyperlink in struts as
<a href= Javascript:formSubmit(<bean:write name="AA" property="aa">','<bean:write name="BB" property="bb">)
defining function as
[code]....
How I would modify the following function to get it to check if a url variable is present and if so to add it into the string variable for the url.
If my url is index.php?make=Apolo then I need to get this added into the var queryString part of the function so that the ajax returns the correct values.