I was just trying to work on some simple stuff and open a random website when clicked on a button. I require the "Random" button to be at the top of the page when the new page opens. I tried using frames to solve the above problem, but when I call the function from within the frame, instead of opening the new webpage within the frame, it goes to that page as it is. Following is the code I wrote till now.
<head>
<script LANGUAGE="Javascript">
function random()
{
I have a code which works ok, except I would like to load the specified file in an inline frame (I1) on the page instead of a whole new page if at all possible Code:
I have a page with two frames "AlexTop" and "AlexMain" Alex Top contains a SELECT statement which essentially navigates the AlexMain frame to a new url.
What I'd like to do is - WHILE the AlexMain frame is loading the new page, a message should pop-up. (I want to use this for errors encountered in the AlexTop frame.)
The code I have right now which is cauing a BUNCH of problems is: Code:
I have a website which includes stories with multiple chapters. These chapters have a set of clickable arrows at top and bottom to take you forwards and back through the chapters, including a "last chapter" arrow.When a story is in progress, the URL of the last chapter changes with each chapter added. Rather than having to go back into every previous chapter and change the URL of the last chapter by hand, I set them up so that the "last chapter" arrow is actually in an inline frame. That way, I only have to change the URL once, in the file go_end.htm which is the source for the frame. So both the picture of the arrow and its hyperlink are being accessed from outside.
My web pages are also set up to run on all major browsers and to detect the window width and resize all the artwork to fit, regardless of the browser and whether or not it accepts percentage sizes. Go_end.htm is no exception - it contains Javascript code which resizes the arrow so it is the same size as the ones which are actually in the parent page, outside the frame.This setup works perfectly in IE and Netscape, but Google Chrome either fails to display the arrow or makes it huge so it doesn't fit the frame. This seems to be because their superfast new Javascript editor is *too* fast. If I bung an alert command into go_end.htm, asking it to say the value of picWidth (the variable which sets the width of the arrow) as it loadfs, what happens is this.
Google Chrome displays an alert saying that picWidth is zero, then loads the first instance of the inline frame with no got-to-end arrow. Then it displays an alert giving a proper value for picWidth and loads the second inline frame with the arrow correctly displayed and sized. If I take out the alerts, it doesn't load the arrow in *either* frame. It's obvious that inserting the alert command somehow forces it to recognise the value of the variable which it then retains for long enough to load the arrow on the second pass.Any ideas for some command other than alert which would trick it into not loading the image until it's recognised the variable? If I put a time delay on loading the frame I can't see that that would help - the problem is that from the point at which it starts actually loading the frame it needs to wait for the variable to be set.
I have two IFRAMES on a page. In one of them, I have a link which, when clicked on, triggers a page to be loaded in the other IFRAME. I cannot have that scheme working with Mozilla. Here is my code:
I'm working on a chat box. Everything works fine with the chat contents in a separate frame except when it reloads. I'm using the <meta> reload and I don't like how obvious the refresh is. Could someone tell me how I can refresh the frame without having the status bar and tabs showing it loading.
On my site people can browse through many pages that are viewed in a set of frames.
Now I would like to avoid reloading the rather large .js file everytime a new page is viewed. (takes a few seconds on an ordinary telephone connection).
Therefore I load it at the central entry-point once when I fill the frame kop (referred to as 'top.kop').
Now from the different other frames, when they are loaded, they call a setup-routine with:
<BODY ONLOAD="top.kop.setup(document)">
This works fine in IE, but not in NN 7.0
NN does not recognise setup() as a function available in top.kop
From a web page, I am opening a window from my javascript function "openMyWindow()". After finishing work in that window i want to execute another javascript function on the web page "finishMyWindow()". My question is how can I call this function from my window? I tried using parent.finishMyWindow() but it did not work.
I have a domain: example.com; which is the parent.And a subdomain: api.example.com; which page 'receiver.html' is being loaded in an iframe, child of parent. Both pages set document.domain = example.com.
I'm trying to adapt this code:[url] but Idon't want to load jQuery from the <iframe> again but I need to have the method $.ajax() working from the <iframe> otherwise it would be a cross-domain request and the browser would abort it. I tried ingenuously to set via $('iframe')[0].contentWindow.$.ajax = $.ajax() and I just got a shortcut to the parent page jQuery method. I also tried to "clone" it using $.expand (true...) but the method doesn't work for me; probably because of the complexity of the objected I'm trying to clone. So is there a way for me to use jQuery to have only a $.ajax() method in the <iframe> ? I've thought even about creating a XHR in the child-iframe and then use that in the $.ajaxSetup ({xhr: THATNEWXHR}) but I couldn't do it. I mean, I want to use the XHR factory from jQuery (which has fallbacks for IE, etc) but it has to be created from the iframe-child.
Maybe there is other way to make the AJAX call come from the child-iframe.
If you're wondering "why don't you load jQuery from <script> in the child-iframe", there is a reason... As I'm using jQuery plugins + my own custom javascripts + other independent scripts I created a compiler which minifies each file and bundle them in one. The advantage of this is the reduction of HTTP requests. So "why don't you load that bundle inside the child-iframe?", because it's ugly and Twitter doesn't... Yeah, I like to take Twitter as a reference and I think if they were able to make it so can I;
I got to work in most browsers except IE and Operaby doing it with pure javascript.
I'm "attaching" the code for you guys to test. If you open it with Chrome, Safari or Firefox you will receive 2 alerts one with the return of $.get() and another with the return of a request made via XMLHttpsRequest object. Otherwise (if you open it with IE or Opera) you'll get 'undefined' in the first alert but the real return in the second.
Im currently building a new discount-webpage and Im looking for a solution to be able to hover over a discount button to reveal a small text without clicking. And after clicking on the button that the text in the flash button is copied into the clipboard and a new page open with a small frame from my window with the new page underneith. examples of this kind of script can be viewed on this page: [URL]... Im not looking for someone to do this for me. All I want to know if there is another language to do this with like possibly java? and maybe some links to tutorials. (the current page solves this with flash which I havent worked with before.)
Im trying to make a back button that reloads the previous page the user was at. The back button will be on a small top frame and the page that needs to be controlled will be in the main frame.
The top frame is just a navigation system, and all pages will be loaded in the main frame. Im trying to use this Code:
I want to have a main image in place and when you click on 1 of the 3 frame options the frame changes showing a preview. Also I would like the add to cart button change its code to add the correct item as well.
i need to pass the data in the textfields from the left frame to the textfields in the right frame of my frameset. (ex: dslnum of frame1 will be pass to txtDSLTN of frame2)[URL]
I have two frames (frameset, let's call it frame1 and frame2). Frame1 has links..., and frame2. When some link in frame1 is clicked, it must be changed content of the frame2. Here's example: click. How to do that? (I don't see any javascript code)
I have a parent document that has a frameset with two frames in it. The first frame is a "header" that runs across the top of the site, and never changes. The second frame contains the "content" of the site. Essentially, I am trying to figure out how to prevent the header appearing above external sites when the user clicks an external link in the "content" frame.
Every time the content frame changes to a new URL, I would like the check that URL and determine if the content frame is changing to an external URL (i.e. different domain in URL) or to an internal link (same domain in URL). If the content is changing to an external link, I want to break out of the frame and just load that external link in the top most document.
I would like all of my javascript to be in the parent document, not spread throughout the individual pages of the site. I was trying to approach this by setting the onunload event handler of the content frame, but I am left with a couple of specific questions: 1. In handling an unload event, can you determine the next URL that the document is loading? Code:
I have a little problem, I structure my site with a main page index.html with a frame in the central whit name CENTRALE, so every other page I will open within this frame. Now I need to have a direct link to these internal pages, give an example I wish it were possible to go to the page clothing giving a direct link to that section of the site type www.indirizzo.com / clothing.html because the state of things if I take the 'direct address to that page I open only the part inside of the frame, but I wish I would open inside the "main frame, there is a solution in javascrip to overcome this problem?
I have a frameset with two frames; topFrame and mainFrame. I have code in topFrame and wish to print the contents of mainFrame. The code that I have used has worked for many years and still works on my localhost Apache Server. However, it has now "stopped" working. When I press the button in topFrame it prints the contents of topFrame The code that I am using is
I use dreamweaver mx html editor to make web sites. I think I know enough Html to get by. My new site uses a frame set so the head and controller don't change reload or move. This works nice, now all I have to do to make a new page is make the content page. But my problem is if I send out a link for someone to look at, it only loads the content page and not the frame set. I thought I could use javascript to determine if the frame set is present and if not load it. But I can't seem to find a way to sent variables from one frame to another. Also if a user clicks a link I would like my flash controller to reflect it.
I need to know how to refresh a bottom frame TO a specific dynamic URL from my top frame (meaning the code has to be in the top frame) say every 5 seconds. The top frame will be a php file as I need DB values. But I believe the frame thing is done via javascript. This ain't working so far, it only loads the first URL at not the rest. Is there the ability to refresh to a specific url in a target frame. Code:
One more question about manipulating iframes. In a script I've looked through to investigate AJAX file uploads, there is this technique for accessing the contents of an iframe:
Code: if(frame.contentWindow) { var thebody = frame.contentWindow.document.body; }else if(frame.contentDocument) { var thebody = frame.contentDocument.document.body; }
I haven't been able to find much info on contentWindow and contentDocument. In fact, other sources I've found talk only about using contentWindow to access an iframe's contents, ignoring contentDocument completely. What is the difference between the two, and what browsers is the contentDocument check targeting? Any modern browsers, or is this a backward compatibility thing?
I'm currently working on a site where we pull in information from an RSS feed and then use a script to rotate them. The problem that I'm coming up against is if the RSS takes a while to load the script is throwing an error.
The RSS feed is being pumped out as list items so if the li isn't found that's when I receive the error. I thought a while loop maybe the answer to this but I'm unsure about how to implement it. I've attached the function below.
I have a bunch of jquery code that animates survey results. It starts by clicking on a css designed 'submit button' (see below). My question is to get the following, which works once the button is submitted, to activate instantly upon page load...for reference, here is what I am working with currently:
Code:
Then a css enabled 'pop up window' appears due to a CSS effect:
Code:
Question is: How do I do this without clicking on a button. Rather, have this work, as it does now, by page onload? It'd save me a ton of time and finally let me wrap up a project where the creator parted ways.
I know one might want to ask "Why does it have to activate on onload? Take my word, having a pop up with querystring makes all the difference for reasons I won't get into.
I create an iframe in script and load it with this code.
[Code]...
This should force the loading of the savepages.php file. In that file I do an echo to verify that it is called.
[Code]...
The objective is to call that php function. The javascript function is called. I don't know if the element is actually created. Unlike php javascript doesn't put anything in the source for us to verify. I don't have ajax. How can I make the javascript function call create an element that loads the php file and causes the code in that php file to execute.
I am creating a simple "fill form" function for a specific page. The function will fill the form and click submit. after this a second form appears which needs to get filled and also send a click to submit button.
Unfortunately when i append the script dynamically to a page, when the page gets refreshed,after the first submit click, the script stops executing and therefore the second form does not get filled at all.
I searched and found out that if I append the script to an independent frame it will continue executing.
Note that the original pages do not have any frames. so I must somehow create a frame on top, append the script and run it.
I was having no problems at all testing at home (FF, in private mode to keep cache clear, and error console to check... also Opera and Safari) when I suddenly lost functionality on several jQuery functions, all of them similarly structured. Couldn't find the problem; updated jQuery; stripped the codes back to one particular function; still no clue.
So: now the puzzle isonline. The calls to load the elements in the page are in the <body> tag. These capabilities work correctly: resizing, scrolling with arrows, popup from underlined link, dragging. What doesn't work is what should happen when you hover on any of the six-line figures: You should see a number underneath and on click, a change of color, and new text on the left.
Script file: hover is at line 100; the click function at line 78. The calls for the click function are here: Testing again online, Opera (mac) now functions correctly. So, I think it may be something to do loading. I've put a delay to make sure the elements to be operated on are loaded before the functions which do the operating. Still no dice. It also seems to load really slowly, but that's minor at this point.
