The jquery.validate.pack.js file found on [url] causes an error when run in IE6. I re-ran the packing process with the perl port of Dean Edwards' Packer found here [url] and the problem no longer persists.
Here is the command I ran on cygwin:
These are the safest settings I've found with jsPacker.pl. The packed file lost 2kb (.1kb gzipped) of savings, but it works now!
I have a form (form1) to register with the fields: user, email, password being validated normally.
Have a second form (Form2) to the user update the data registered in form1, and the fields user, email, password is already populated with data from the database, the email field I use the remote validation, and as the field already has been completed and read always says that this email already exists, how do I create a rule or method so that when the field is already filled it not do so validating and validate if it is filled with a new email. Email2 have a hidden field in order to do a test type.
I need to localize my validation plugin in general. Hence I thought I have to override the default code with this one:
But it's not working. Another problem is, that I can't access input names like this > name="xyz[1]" Is there a way to do so?
I'm trying to validate if some other condition exists on submit. I have something that looks like the following:
My .validate works fine outside of the .submit(function(){ Am I barking up the right tree, or is there some other way I can do this?
I am using the "Validation" plugin to validate my form. This is a multipart form where a user can upload a file. I would like to validate the choosen file name such that it contains only alphanumeric characters plus defined extensions. For that I tried the combination of the rules "accept" and "alphanumeric" but this does not work because the file name is the full path of the file name and it contains non alphanumeric characters as: C:umyDirectorymyFile.txt
regular expression which could tests that myFile is made only of alphanumeric characters ?
See this code:
The above is a simplified version of my code, but it shows enough. The two DIVs are set to "display:none".
How do I invoke the validate plugin in such a way that it shows the appropriate DIV when validation fails on the relevant field?
Is the validation plugin able to validate an input only instead of a whole form?I mean, is this lign correct :
$("#InputID").validate(
rules: "required"
);
I'm new to using jquery and I have a question regarding the validate plugin. How can I make the error messages appear where I want them? Right now they appear to the right of the input field but I'd like them to appear below it or wherever i'd like
View 1 Replies View Relatedis there any way to trim the filed value before using jquery validate plugin [URL]../Plugins/Validation/Validator.
View 1 Replies View RelatedI have recently downloaded the jQuery Validation Plugin, and I want to use the bottom part of the demo [url] (Validating a Complete Form) and I have some questions to ask:
1. I want the validation to work after the user clicked "Submit"
2. If a column is wrong (username already taken or password length invalid) I want not only error message but also a picture in front of the error message.
3. I hope that after the user clicks "Submit" and then found a column is wrong then correct it, after the user corrected it and click to other place or other column the validator starts again to check the column the user just edited whether the user just corrected a wrong column or edited a correct column into error.
4. I hope to display a image in right of the column if that column is correct after the validator works.
I've been banging my head against the wall for about a week now. Everything in the code below works as expected. How I can make the error appear in the last <td> in my table below? It currently appears in <td> 4 along with the first input, but I need it in <td>7.
<script>
jQuery.extend(jQuery.validator.messages, {
required: "?"
});
$(document).ready(function() {
$("#myForm").validate();
});
</script>
Table that prints out multiple sets of Radio Buttons
<tr>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4<input type='radio' name='".$row['name_id']."' value=$value1 class='required' >$value1</td>";
<td>5</td>
<td>6<input type='radio' name='".$row['name_id']."' value='$value2 class='required' >$value2</td>";
<td>7</td>
</tr>
I am using the jquery form validation plugin [URL] to get some simple validation done on my form. It's working perfect so far. When I set a particular form field to have the class "required" that makes it so that it can't be blank and when the user tries to submit the form, JQuery displays a "This field is required." text beside the field and focuses on it. The text generally appears right beside the input element. I was wondering whether it is possible to actually control where the error text appears? Say like I set an element div element which I want the error to appear. Is there a way to make it the error text appear in that div element?
View 1 Replies View RelatedI have added a rule to my form but I can't understand why it does not work! [URL]. This is an example page: the rules is that the check box must be checked and there must be a valid date. From firefox console I can see it returns true or false as I need but the validation does not get triggered. Why is that?
View 3 Replies View RelatedAbout the jquery Validation plugin. I need to lock the submit button on some forms to prevent multiple submissions, but I don't want to permanently lock it, in case there's a validation problem that the user needs to resolve. I did come up with a way to temporarily lock it and change the text to "Saving, Please Wait..." for a few seconds, then revert it to an unlocked submit button.
The problem I'm having is that this conflicts somehow with the jquery validation plugin. Some fields that have error messages if the user attempts to submit the form with missing data. If I use the temporary locking submit button (which uses an animation to create a duration) then these error messages do not display.
Is it possible to test for a validation value in a separate function before running this lock function? If valid, lock, if not valid, don't lock, because it isn't possible to submit an invalid form anyway. I tried wrapping the locking submit function in a setTimeout, but that didn't have any effect at all in delaying it.
I am using JQuery Validate Plugin and it working perfectly but the problem is for error place when error message come it make my form display look bad due to error.
I will explain you howThis is my screen when the page is load
Now when I press the Add New Company Button
You can see that look is getting bad. What is the solution for this. how can I stop this.
I am using DIV for each label and text.
I'm using this plugin in its simplest form.. [URL] All I have is this for my code:
<script>
$(document).ready(function(){
$("#form").validate();
});
</script>
It works fine, but I'm trying to hide the error messages which it defaults to "This field is required." The error message shows up in a label.. How in the world do I hide those error messages within those labels?
I'm getting a database error trying to access the validate plugin documentation. [URL]
Error:
A database query syntax error has occurred. This may indicate a bug in the software. The last attempted database query was:
(SQL query hidden) from within function "MediaWikiBagOStuff::_doquery". MySQL returned error "1205: Lock wait timeout exceeded; try restarting transaction (localhost)".
I tried assigning 2 error classes to an error message (as a span), but when the empty field was fixed, the error message wouldn't disappear.
$
(
"#testForm"
)
.
[Code]....
With 1 error class it works fine, but adding a second one makes it fail. Here are some links, just hit the submit button a few times on each one to see what I mean
2 classes: [URL]
1 class: [URL]
I'm using this great plugin, but the prob for me is that all error messages have the same class added to them. due to the layout of my form, i need to be able to move some of the error messages around in diff ways. there is a way to add a diff error class to elements based on their id or class or whatever, but not sure how to do so.
View 1 Replies View RelatedI'm using the jQuery form validation plugin along with the fileinput plugin which hides the initial input area, but uses <divs> and some styling /javascript to show the file input field.The issue I am having, is that the 'this field is required' text that is meant to show on submission, doesn't come up for the file input field, nor some checkboxes that I have in a table. I am guessing that this is because the code is needing the label to be RIGHT next to the element (in this case the file input or the checkbox) in order for the validation message to show..Are there any work arounds that anyone knows of so that I can get the error message to show?Is there a way to show the error message for required fields when they have a div wrapping them or anything wrapping them?
[code]
Is there a way to force Fancybox to re-size after the Validation plugin returns an error message?
I have been trying to insert this into the process, but I cannot seem to get it work.
$.fancybox.resize;
I'm using the validation plugin [url]
I must be missing something, is there not an easy way to validate inline?
For example, I have a required text input that is given focus on page load, I would like for it to throw an error if the user moves to the next field w/o entering any data.
Right now, it only checks for errors on 'submit'.
I'm working under certain constraints wherein,at a certain point outside my direct control,validate is called with no arguments, but after that I want to set a custom validation function on a form field. I figure there's got to be a way to manipulate validate's internal data structure to add the function, but I don't have a clue as to how.
View 1 Replies View RelatedI have a section of a form containing elements that are not visible, currently just in a hidden div. Some of these elements have validation on them so when the form is submitted it fails on this validation.What I am after is a way to stop the validation firing for any hidden elements. I have tried setting them to 'display: none' and 'visibility: hidden' but this does not have any affect.
View 5 Replies View Relatedim using the validate plugin with the meta data plugin
jQuery(document).ready(
function(){
jQuery("#com-createForm").validate({ meta: "rules" } );
});
and then in the html i have for example
[Code]...
This is in regards to Jrn Zaefferer's plug in.How do you customize input validation so that I can remove foullanguage?So that first name or last name doesn't have "fck you" or something
View 2 Replies View Related