I have a submit button:
<input type="button" value="Submit" onclick="return SubmitData();" />
SubmitData(){
//Do some form validation on client side
[code]....
I've got a form for adding a person to a textfile. The form is made with html and i submit it to a perl-file, where i read out the input and write it in a textfile. After writing the file i want to make a redirect to an overview page with each user and there i want to have a success-message ("user successfully added").
How do i make this success-message on the overview-page after the redirect from perl? I know, i could just redirect to the overview-page with a parameter (overview.html?success=true) and then if the parameter is set, display a success-message. but if i handle it with a parameter then the success-message does not hide after a page-refresh.i've seen a lot of web-applications where the success-message is displayd but hides after a page-refresh..ps: here is an example of an application where they have it programmed like i want it:[URL]
I can't fire my function with onclick event in Firefox.My little piece of code works perfect inIE. but in firefox it just doesn't work and no error in firebug by theway.I'm using Firefox 3.0.9This is the code:
<script type="text/javascript">
function del(mesId) {
$(document).ready(function() {
[code]...
I want to hook into validation success/failure events, but don't see an API to do this?
i.e. I want to enable/disable a particular set of controls depending on the state of validation.
Is there a way to do this? Am I missing something?
I have a lot of similar instances of the following code on my page:
$('#btnEditParty').click(function () {
$.ajax({
type: "POST",
url: "WardAdmin.aspx/GetParty",
[Code]....
I'd like to create a generic function to save repeating a lot of code and then just pass in the relevant values.
I'm fine with that, the only thing I'm not sure about is if/how I can pass in a function name to be called on success/fail.
This post is where I was doing something similar to save repeated code: [URL]
In a similar way is there a way of passing in a function name to be called on success?
I am working a project for school in which I am trying to make a simple math game. When the user clicks the start button it will bring display a question and ask for an answer. What I want to to is when the user clicks the start button it will swap the button for to other buttons to move to the next question and one to restart the game. Which works fine, the problem is after the buttons are swapped.
How would I access a sub function from a buttons onclick event? I currently have onclick="return MathGame.resetForm();" but that throws an exception and I can't see where. What is the best way to go about this. Also this is my first attempt at using javascript in this manner so I'm probably going about it the wrong way.[code]...
I have a small portal website with some ads around. I'm in the process of creating an ads manager script with php and mysql and would like to know when an ad was clicked. I'm confused on how to do this but, the only way I can think of is by adding an onclick even to every ad img:
HTML Code:
<a onclick="callfunction('ad_id');" href="ad url"><img src="path"></a>
Now, how would I call a php function with onclick? I guess that can be done with ajax but, don't know much on how to use it?
The following coding works in Konqueror 3.5.10 on Ubuntu 8.04.3 LTS but not on Firefox 3.0.10 Linux/3.5.7 XP, Opera 10.10 Linux or IE8 XP.I can't see why but it may be to do with the recursion (showtable calls onclick calls addit which calls showtable).Somehow it is not seeing the addit routine the second time round.It is meant just to add a line. Eventually it needs to be a complex table but this is for illustration. There are other ways to solve this but this would be the simplest - if it worked!What happens is that one line is added OK but then it chokes. This is what makes me think it is the recursion but I can't see otherwise how to make it write the updated text. I realise I should have a document.close() in it as well and I have tried adding <![CDATA[ ... ]]> as well.Other than in Konqueror, it gives an error message saying object not found (in IE8) or more explicitly:[code]
View 5 Replies View RelatedDoes anyone know how to create a link (<a> . . . </a>) with some piece
of javascript code that has the onClick event set for some function that I also wrote (not a build-in function).
I can find all sorts of samples in these disc.groups but none of them
seems to work for me.
I am focussed on Firefox, but some code that also works for IE, would
be appreciated.
BTW I know how to create elements in the html document, that is not the
problem. The problem is that I seem not te be able to set the onClick event for some created element. I tried for both a link and also for a text-element.
I can set the onClick for some built-in function like alert('Nice Day').
There are loads of examples to be found for that, and they indeed work.
Do I have a simple syntax problem or something more serious.... I get the errror "foo is not defined" when the image is clicked in the following:
[Code]...
I have a button that I wish to call a predefined function (Go()) shown below, but, I wish part of the URL that is sent to the function be inputted by the user.
function Go(URL)
{
window.location = URL;
}
Here is the code I have for the button, but I am getting a syntax error. What do I need to do?
<input type="button" value="Duplicate" onclick="Go(CustomerMailingList-duplicate.asp?ID=<%=rs(strPrimaryKeyFieldRecordset)%>&CustNum=prompt('Enter New Cust #', '0')">
I need to run a PHP function call through an onClick which through my research I have found that I need to use AJAX. Let me explain better what I am trying to do. I am currently using Simplepie PHP to pull various RSS feeds, I have an HTML DIV tag that loads the titles of the feeds and I want to get to the point where each title is clickable (im assuming this is through onClick) to run a simplepie PHP function to pull the content into a seperate DIV (on the same page).
[Code]...
for example:
script1.js
functionfirstLoad() {
loadScript('second.js');
}
and the code which is executing:
[Code]...
maybe exists another ways to load and execute the loaded functions before another syncronous request is started?
why not worksuccess: function()?
success: function(){
$(this).fadeOut("slow",function(){
$(this).parent().remove();
[code]....
Is it possible to set an html element's (created through HTML DOM's createElement() method) 'onclick' attribute's value to a Javascript function which requires a parameter, passing a variable to it at the same time?
I have the following Javascript code:
var parentDiv = document.getElementById("subscribers");
var stubSpan = document.createElement("span");
stubSpan.id = "opentok_subscriber_" + stream.streamId;
stubSpan.onclick = showStreamInFullScreenMode(stream);
parentDiv.appendChild(stubSpan);
'stream' in the bolded line is a parameter variable of the function that the above code is in, and I'm trying to pass it to another function using an onclick event.
What I need is simple. Here I created 3 links and after that I want to add dinamically an onclick event to alert the number of the link. The problem is I can't find the way to pass the variable.Obviouslly this is not the actual function, but I need to solve this problem to apply the solution into a more complex script.
View 3 Replies View RelatedI have a few buttons on a page I'm developing and I want the onclick event to call a javascript function in an external file and execute it. I would like to be able to pass a parameter to that function and then either have the function take the user to a new URL or make changes to the webpage content.
Initially (just to test) I had inline javascript that caused an alert to popup. That worked fine. Next I took the inline code and put it in a function in an external javascript file that was referenced in the HTML:
[Code]...
At the moment i got the following:
[Code]...
I am trying to call a dynamically chosen function on success from an ajax call (later to be error and so on also)The following function works fine and passes the url to call and parameters into the makeAjaxPostCall function. successHandler is the function to call on ajax success.[code]
View 2 Replies View RelatedI need to invoke a method when a field validation is either successful or unsuccessful. I have managed to get the function to run if the field validation fails by using the following:
$('#myform').validate({
rules: {
client_name: {
[code]....
But how do I invoke a method specific to a field that triggers when the field validates successfully? I need to invoke showBigGreenTick(fieldname) for the fields that are validOn another note, I find it very strange the the documentation is so poor regarding this validation. To even find out that there was a "messages" option for validate was found on another website.
Why my page is not redirecting within the if then statement.
Here is the code:
I have tried this without the if then statement and it works fine. I am not sure why my if then statement will not work within success function, am I doing something wrong?
I know this is a simple question with a simple answer, but I can't seem to wrap my brain around it.Sorry for the infantile nature of this post. Anyhow, I am making an AJAX call via JQuery and need the function to return a value from a calling function, like so:
[Code]...
This is my example of ajax request. It works fine with jQuery 1.3.2, but it doesn't work with 1.4.x
$.ajax({
'dataType':'json',
'url':'/auth/check',
[code]....
I have 2 files, index.php and test.php
index.php:
Code:
<script type="text/javascript" language="javascript">
$(document).ready(function(){ setInterval(function(){
$( function()
{
[Code].....
I want to call function hi(); from test.php when the ajax call in index.php is successful.
I am getting hi(); is undefined.
I can't use the value returned by $.post() method out of the scope of success function.
For instance in below example myvar alerted as empty even though var is alerted with a value. Besides, hide does not work in the scope of success function.
How can i fire a function on click event for an element dynamically returned from an ajax call
View 1 Replies View Related