I've been using the Jquery Flash Plugin by Luke Lutman [url], and so far it's been great. However, I've run into a little problem.
I need to create a flash overlay on a page that covers the entire width and height, and as a result I need to set the width and height to 100%, but the plugin only seems to accept pixel based values. So does anyone know how I'd achieve this using the current plugin? Unfortunately changing the flash embed method isn't really an option at this point.
I need a code that when a button or image is clicked then a div's width and height are changed.
Ive managed to get a few codes that does this, but the real problem is that, the contents of the div is an embedded flash file and i thought that by setting the flash width and height to 100% then the flash would fit to the new size of the div, but it just didnt work.
I need a code that when a button is clicked then the div's and the flash's width and height are changed.
please have a look at the temp website latinunit net / temp / , you will understand where im coming from.
on the right hand side i have a flash chat in a div , div is controled by a script that allows it to follow the scrollers up and down.
My goal is to add a little button in the same div that says expand or maximise so when clicked the the div expands aswell as the flash file.
I need a simple javascript that I can use in my HOME page.index.html has a flash animationnoflash.html is a page without flash animationKindle does not support Flash and therefore i want to redirect my index.html to noflash.html page.
I am trying to use JMedia plugin [URL]... This works excellently, however I am finding problems mapping mp4 to play with my flash video player. I am using this video player [URL]...I am using following command in document ready function to map my mp4 with flash.
Is a way to set the width of the input element of the giva mcdropdown plugin [URL].. It is 393px wide (as you can see in the example at the plugin page), but I like to have it narrower.
I have 2000px width images that I want to be centered in a 100% width slideshow. I basically want my images to cover the entire width of the page, and also be centered.
Nothing has worked for me. No matter what I do, my images get pushed to the right and far off from the center.
I didn't see this as an option, so I decided to give it a try on my own. I was able to add some lines of code (shown with the > in the margin below) to the jquery.cycle.js script to read in the width of each image and center the slide within the slideshow container // set position and zIndex on all the slides
Is there any way that one could have supersubs functionality applied to drop-down multi-column menus?I assume one would need to calculate the width of each column plus the combined width for the container.
I am using Ben Alman's JQuery resize plugin in order to obtain the varying computed width of an element when the window is resized (the element in question is a page wrapper that exhibits the expand-to-fit behavior of a block box, and it's computed width is obviously influenced by the resizing of the window. Essentially, what I need to be able to do, is to reference a variable that is defined in a .resize() function ('width_page') in a seperate .each() function.
[Code]...
I now understand that variables can't cross boundaries like in the example above, which leaves me a little stuck. I also understand that this is specific to the context of the .resize() function, and that it can't be taken out of it without using an element selector. Is there some way I can call the .resize() function in my .each() function?
I currently have a website where i share thoughts with my friends (some kind of forum) and within this 'forum' people can post pictures they made but most of the time these pictures exceed the max width of my website so my website gets all streched out!So this is what i want: all images on the page must run thru some sort of function which checks if the image image width exceeds the max_width. if it does then the script must calculate how many pixels the current width exceeds the max_width and get this number so that the script does: current_width = current_width - (max_width - current_width)
I've recently start using Flexigrid (old JQuery grid plugin), and, as you may know, one of the few issue this really good grid plugin got is the lack of liquid layout option. My personal idea to solve the problem is to set the "width" parameter depending on $(window).width. Here is the problem (and here's why i post this question in "General use" and not in "Plugin").
The starting, and working, code is: $(document).ready(function(){ $("#flex1").flexigrid ( {
[Code].....
This work fine for me, but I supose it could be done way much elegant... maybe somethin without "IF" that could emulate the "%", like var percentage = $(#div.id).width()*0.XX with the 0.XX picked from an array of percentage, one for each column. Probably I should set up a function... ahhhh, as you may easily see I'm a total beginner with JQuery (and JS in general...)
Is the next jQuery code the best way to decrease an elements width?[code]I tried using the next code:[code]but that's not working, also not with '-20'.Maybe it's an idea to add this functionality? It's is already used in the .animate() function for changing the position of an element.
Doing my own fitness bootcamp site and want to fancy up my front page. My front page loads a picture and I want it to load like flash. What could I do? I have all the Adobe Software, just don't know how to use it.
I work for a company called Best of the Best (www.botb.com). We use Flash countdown clocks to mark the end of our competitions. The issue we now have is that our clients are using mobile platforms more and more and as bloody Apple wont support flash (not fully anyway) we need the option to detect whether our users have flash and if not then replace the current <OBJECT>Blah Blah Parameters etc</OBJECT> with <DIVCLASS="NON_FLASH_CONTAINER">All other bits in middle</DIV>Is this at all possible?
I'm trying to put some code together to create an image-swapping system, that when you click on the image it'll hide the image and replace it with a given iframe vimeo/youtube code...The swapping part works fine, however when the iframe loads up, it hides all other flash objects in the page, and I can't figure out why.Here's the JS
Code: function swapvideo(w,h,url) { document.getElementById('video_pholder').style.display='none';
let me try to explain better what I'm trying to do. I'm a real newbie I don't know much javascript but I understand more or less the logic behind it... tell me if this solution should work and if you know how to do it please show me. [URL]... I need to make div#photo's width to match the total width measurement of all the images it contains. If you load the page and you don't touch the size, it will work fine... but that's not realistic. If I resize the page, which will happen often on this kind of page (I'm assuming), the whole thing goes haywire (try it, scroll to the last image and resize the page you'll see what I mean). What can I do? Is my idea the right solution? Am I not explaining this clearly enough? Let me know please, I'm desperate. I've been trying to get CSS to do this for me for 3 hours now. Nothing works.
I am trying to setup a javascript function that sets a div's width based on the combined width of the li's with the name "navItem". The problems I have been running into when trying to define the width of the li's is that they do not have a width defined in css. Can anyone help me out with this? The javascript function setWindow is suppose to show the div loginWindow and set the width of it.
I have created no flash pages and flash pages, but instead of creating a portal at the front of the site that leads you to a flash site and a no flash site id like to do it so the page detects flash or not, and redirects to whichever URL.
Is this possible, or do multiple browsers cause problems ?
I have created a transparent flash video (virtual spokesperson) for my website. For demoing purposes, I would like to have this appear on any desired website.
This is what I am trying to produce - here a virtual spokesperson appears on the [url]website: [url]
Have a look at other sites which enable one to type in a URL and their demo virtual spokesperson appears on the given site: [url] [url]
I believe they do this within an iframe to display the underlying website.
I want to set the width of a div to be the same width of the image inside the div.The following code works great. But...The images are different widths, so both wrappers are set to the width of the first image. Without having to add an ID to each wrapper or image, can the wrapper width be set to the image width using the name of the image as the unique identifier?
jQuery: $(document).ready(function(){ var newWidth = $('div.wrapper img').attr('width'); $('div.wrapper').width(newWidth); });
I have a slideshow plugin and there is a function in it called stopAutoplay(). This is called when I click on the pre-defined pause button in the slideshow, so it stops.
If I switch between the slideshows(Slideshow 1 2 3) the slideshow is getting messier and messier because it starts many slideshows at the same time and the plugin gets confused what to show.
I figured if I click on the pause button before I switch to another slideshow it works fine. Therefore what I would like to achieve now is to call stopAutoplay() somehow before I switch to the new slides.
How can I call stopAutoplay() from the html file when I click on one of the slideshow 1 2 3 buttons?
I've tried the codes in green below but they don't work.
If there is a better solution let's say to kill everything before the new slideshow appears it's even better. Although I've tried die(), empty(), detach(), remove(). I hoped remove() would help cause as I read it's suppsed to remove everything but for some reasons it doesn't...
I am creating an extension plugin to the jQuery UI Date Picker plugin mostly to just standardize the options used, as well as to add an icon to open the calendar. I am aware of the plugin's use of an icon trigger, but this will not work, as I am using an icon in my sprite image and not wanting an additional request for a mere icon.
My plugin code:
( function ( $ )
[Code]....
This is where it really perplexes me as this code does work to produce the calendar icon. while I could get it to work this way, it is obviously not the better choice as it should be part of the extension plugin and not get repeated in all of my various implementations of the plugin.
I'm trying to take the hex value chosen from a jQuery colorpicker plugin, and store it as a cookie using the jQuery cookie plugin. I just don't know the appropriate way to tie the two together.
