i have 2 radios :what i need is once i choose the 1st radio i will get 1st DDL with folollwing element :Orange AppleKiwiif i chose the 2nd radio i should have the 2nd DDL with :PotatoTomatolegume
View 6 RepliesI am trying to come up with a script that will validate a radio group based upon the status of a checkbox.If box is checked radio button is required else it can stay false.here is as far as I have gotten so far. just a basic if statement but i need to incorporate the check box
Code:
function validate_form ( )
{
valid = true;[code]......
I have a radio group that, when a certain option is selected, it makes the radio group disappear and a textbox appear. It works great in Firefox, but it appears to be glitchy in IE.
<script type="text/javascript">
function showRestaurantTextBox()
{
[code].....
So I need to create the equivalent of a radio group without using the name attribute. A radio group is just makes one radio selected at a time and this is automatically done if all the names are the same but that isnt an option for me. Here is an example of a normal radio [URL]..
I have looked up and researched many ways on how to do this but I haven't found an exact solution. I have tried to make my own script for this but I just can not remove the check from a radio button after it has been clicked.
[Code]...
I want to create dynamic radio button group with different names.
<script language="javascript">
function changeIt()
{
[code]...
I want to create a radio button group(2 radio buttons on a group) with different name.
I'm trying to develop a module for an aplication and i'm basing on an example from the jquery ui dialog [URL] But i'm using radio buttons and a datepicker field but problems occur when i try to add a second row to the table. It just adds the date value but the "motivo" value don't. I mean everything works fine at the first attempt but at the next it fails.
Here is part of my code:
$(function() {
var fecha = $("#datepicker"),
motivo = $("[name=motivo]"),
allFields = $([]).add(fecha).add(motivo),
[Code]....
In validating a form, I need to make a decision based on the result of a radio button group.The radio button group is defined like this:
<input name="payment_method" value="visa" type="radio" class="radio payment_method">Visa
<input name="payment_method" value="mastercard" type="radio" class="radio payment_method">Mastercard
[code]....
I have got a radio button group. A click event have to reset it that the first radio button is checked again.
<input type="radio" name="msgtype" value="1" checked="checked" /> Gruß
<input type="radio" name="msgtype" value="2" /> Wunsch
<input type="radio" name="msgtype" value="3" /> Frage
That doesn't work so far:
$('#cleaner').click(function(){
$("input[name='msgtype']").filter("[value='1']").attr("checked","checked");
});
working on a project at the minute but have dug a hole in javascript for myself on this one. The objective was to use cookies to save a form whilst a file was being upload at the same time on the same page.To get the filename for the uploading mp3 file inserted into the user current form which then is posted on submit to a directory where its viewable for download, the page must refresh and a query string is used to put the uploaded files name into the form.What i wanted though was the user to be able to write out there tracklist whilst there file was being uploaded so they can make the most of the time and do 2 things at once.Getting round this was ok using cookies to remember the forms input values and restoring them once the page had refreshed.
The problem is thought the cookie script will only write once to file if the text box that gets updated with a new value being the uploaded file value changes,to get round this i wanted to disable the radio button that saves the form upon change of the default value of the mirror1_url text input as the upload session is complete and the user would not need to recall the cookies values.a working version with the above problem can be found here http://urban-love.co.uk/uploads/userupload.phpim sure its only a few lines of script you can see I have implemented one in the page already see view source but it takes no effect in this form for some reason?
I am sure this is simple, but I am simple when it comes to Javascript - meaning pretty much new. I have a place on my site that has a drop down box, with multiple options listed in them. I want the user to be able to select an option in the dropdown box and then hit the submit button. They would then get taken to the page that is mapped to the user selected value in the field.
View 2 Replies View RelatedI am a complete JS noob. I have been googling for hours trying to find a way to implement what I think is a simple thing - but alas my deadline is here
In a nutshell I have a simple form that has radio buttons code...
I have a page where I need to display 1 of 5 divs, based on the radio button that's selected. The code I'm using is from a previous page that basically did the same thing, only the user had to click on a tab, which would in turn change the style on the div from "display: none" to "". I'm assuming I can basically use the same code, but I'm not sure how to do this with radio buttons. The page I'm working with is at [URL].
Here is the code:
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "[URL]">
<html xmlns="[URL]">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
<style type="text/css"> .....
I want to automatically select a specific checkbox when a user clicks
(selects) a specific item in a radiobutton group. Both controls are in
the same form.
Let's say for argument's sake that the form looks like this
(inessential items left out for the sake of clarity):
<form name=form1>
<input type=radio name=Radio1 value=Option1>
<input type=radio name=Radio1 value=Option2>
<input type=checkbox name=Checkbox1>
</form>
I want to write some Javascript to automatically select the "Checkbox1"
checkbox when a user selects "Option1" in the radio button group.
So I have a dropdown box and when a certain option is pressed will show other fields... if not they stay hidden. However, I also need it to check a radio button that should remain showing.
Right now I have
<script type="text/javascript">
$(document).ready(function(){
$(".dnuHide").hide();
$(".dnuHide input").attr("disabled","disabled");
// If option Other is selected for institution type, show text field for Other
$("#region").change(function() {
var val = $(this).val();
$(".dnuHide input").attr("disabled",(val=="DNU")?"":"disabled");
(val=="DNU")?$(".dnuHide").show():$(".dnuHide").hide()
});
});
</script>
How would I modify that so I can also have ()Option 1 (*)Option 2 (already checked) change to (*)Option 1 ()Option 2
The animation that I envision coding with jQuery has proven too advanced for me at the moment. Might anyone know of an example that would help me achieve the below (simplified to the barest minimum to make sense):
I'm building a page that is split into two halves... the left half has six radio button choices: blue, red, green, yellow, purple, and black. The right half is empty. When a radio button is selected in the left half (for this example, I'll say "blue" is selected), I'd like a blue square to bounce (jQuery UI "easeInBounce") into a specified area on the right half. Then, if "green" is selected... the blue square that was already on the right half would fade out (jQuery "fadeOut") and then I'd like a blue square to bounce (jQuery UI "easeInBounce") into the same specified area on the right half.
Might anyone know of a demo that would allow me to code this? The demo can be similar (using different animations), but I'd like to see how it uses radio buttons to control an animation, and to check to see if there is already a target in existence... which would make the "fadeOut" necessary.
I am a newbie to jQuery and still learning the ropes. I would greatly appreciate your help in resolving the following issue: I am using jquery.validate.js plugin to validate a form.
The form has two groups of radio buttons with names ( g1 and g2 ). It also has other elements like textboxes and select boxes.
[Code]...
I'm fairly new to Javascript and would be grateful for any help you can give me. I've had a search on Google and found a couple of potential solutions but nothing seems to work quite right for what I need.
Basically I have a form with several questions followed by Yes/No radio buttons. Dependent on which answer is given, I want to display a different message above the text box.
For example, if you answered 'no' to a certain question then the message above the text box would change to say "Please fill in additional information" or something along those lines.
[Code]...
how to get contents into a textarea based on a radio button selection.
Code:
<script>
text = new Array()
text[0] = Array('Saab','Volvo','BMW');
text[1] = 'second list';
[Code]....
i would like to have 2 radio buttons each with a associated div when the page loads the first radio button will be checked and its corresponding div will be show when the user checks the other radio button its corresponding div is shown and the first div is hidden:
View 2 Replies View RelatedI am trying to create a script that will display content based on if aradio button is selected, and if the other is selected would hide thecontent. Now, each of these radio buttons are part of a radio group,so their names are the same. Most examples show nput:radio[@name=item] Since I have 2 items that have the same name, I can't usename, so I thought I would try id or value. It isn't working. If I addonly the show, whenever you select either radio button, it shows, andif I add the hide code, it doesn't work at allHere is what I have right now.
$(document).ready(function(){
$('#offices_checkboxes').hide();
$("input:radio[@value=1]").click(function() {
[code]....
I have a webpage which has two radio buttons. There is a label also in the web page. I want the label string to be based on the radio button status. I am able to change when somebody press the radio button using "onclick" function, but now when the page is reloaded.
Here is my code
Code:
I want the highlighted label value to be changed based on the radio button value at the start up itself( ie if the page get reloaded if some error has happend at filling the form)
I am very inexperienced with javasciprt. I am designing a form in coldfusion, and want some dynamic action to take place. My users will be offered 2 selections via radio buttons. Depending on which radio button they select, they will get a few more radio buttons to choose from. I have been told that this can be handled in javascript. So I am appealing to the javascript programmer nation for some assistance in this endeavor.
View 6 Replies View RelatedI have a set of radio buttons on my pricing page:
And a corresponding text_field input element div I'd like to display based on which radio button the user selects:
When the page loads, I'd like to see:
When the user clicks on a (different) radio button, or clicks one for the first time, I'd like whichever div is currently showing to be hidden, and the newly selected one to be shown.
Right now I have jQuery code at the bottom of my page that looks like this:
For each of the four options.
When the page loads, the correct div is shown, and when I select a new button, the new div is shown, but the already showing one isn't hidden.
I've read some posts that suggest using change() instead of click(), but others indicate that's problematic in IE.
I have a set of radio buttons that are wrapped in divs and I want to highlight the wrapping div (by adding a class) of a radio button that is clicked while removing the highlight from any previously selected radio button (by removing the class).
I've got it working to the point where it only works on one set of radio buttons but I need to be able to do this on multiple sets. I did find this but was not able to figure out how I'd apply this to my requirement as it is working the other way around here:
jquery-tip-how-to-select-radiocheckbox-input-on-click
why its working only on the last set?
$(document).ready(function(){
function radioHighlight(radioName, className) {
radioNameSelector = "input[name='" + radioName + "']";
$(radioNameSelector).click(function() {
[Code].....
I have the following code:
<form action="" name="myform" method="post">
<input type="hidden" id="picimages" name="picimages" value="<?php echo $resultsetstory['bigger_id']; ?>" />
<p>
<label>
<input type="radio" id="picimages" name="picimages" value="<?php echo $resultsetstory['picture_id']; ?>" />
<?php
if($resultsetstory['title']<>""){
[Code]...
However I can't get the value of the radio group for the one that is selected.
I'm trying retrieve the value of a radio group, which ever button is selected I need to assign a value to a var. I can't seem to get this right, I'm not even sure if I'm going about this the right way. Here's my code.
//the alert is just to see If I'm getting a value to start with.
function validateOrder()
{
for (var i=0; i<document.getElementById('Size_rg').length; i++)
{
if (document.getElementById('Size_rg')[i].checked)
{
return i;
alert(i + 'you got a value');
}}}
<input name="Size_rg" type="radio" value="10"/>
<input type="radio" name="Size_rg" value="12" />
<input type="radio" name="Size_rg" value="15" />
<input name="Submit_but" type="button" id="Submit_but" value="Submit Order" onClick="validateOder();"/>