Im a bit of a noob when it comes to mootoools, but have created a menu which hides itself and slides in from the left... I'd like to have it start hidden first though... can anyone tell me what i need to add, remove or edit?
[Code]...
I'm using Mootools 1.2.0 and I'm trying to create a mouseover slide menu. That means that there will be a slideIn effect on menu-item's mouseover event. I have created a menu and I have achieved the sliding effect. The problem is that when I mouseover quickly on menu items, the slide in effect of each item doesn't have enough time to complete. In the end, there are more than one slides opening at once, instead of one. Is there someway to force my script to end all slidein or slideout effects before starting a new one?
[Code]...
Bascially I have a main page with all the code setup to slide whatever content is in the div 'sub_content'. As below: [URL] Contained in the my "external pages" are different slide contents that I want inputting into the 'sub_content' div as below: [URL] If you click 'Test Link 2' you will see it fade out but it's then loading in the main page again? I think it is this line of code found in submenu.js where the problem lies? var myXHR = new Ajax( objLink.href + '&blnAjax=1', { method: 'get', evalScripts: true, autoCancel: true, onSuccess: showSubPage } ).request();
View 13 Replies View RelatedI got an unusual request form a client. I got a form and I have to get values from certain input fields and assign them as a value to a hidden field and then submit it through php. I'm using mootools (1.11). I was tinkering around that for a day and wasn't able to solve it. Here is the html:
[Code]...
Trying to learn the basics... Here is a script for three toggle buttons that each when clicked open their corresponding divs. Fine. Now how does one go about automatically closing an open div when clicking on a new 'toggler' that opens it's div? I see other posts about this very question, but I'm just not grasping the logic.
jQuery(document).ready(function($) {
$("#toggle1").click(function () {
$("#toggle1div").toggle("drop", {direction:"right"}, 500);
});
$("#toggle2").click(function () {
I've used Jquery Cycle to build thefollowingpage: [URL] As you can see the slides runnicelyin sequence with a clickable navigation. I would like to be able to run this slide show from a random starting slide on each page load, but for the slide show to remain in sequence and not load random slides thereafter. I'm sure this is doable - but the only random syntax I've found for this plugiin loads just random slides, out of the running order, which makes the navigation run randomly. I just want the starting slide to be random.
View 1 Replies View RelatedI am using the toggle function to hide and show a div. Is there any way I can get the div to be hidden on the page load, and then when when toggle is called, it will show it (since it would be currently hidden).
The way I toggle works for me so far, the div is visible as default, and then once the toggle is activated, it is hidden. I want it to be the opposite.
I have code done to have hidden div's slide down from the top (by clicking a div below it) which is cool, but how can the code be changed so that the hidden div's slide from hidden upwards rather then down, so to say that the div is at the bottom of the page then clicked and reveals upwards.
The JS:
The HTML (It's the twitter and music that needs to be sliding upwards)
I have a vertical navigation menu with the basics (a <ul> with four <li>) but I need one of these list elements to slide to the left and when it finishes show or slide down a nested <ul> with its own li that is now hidden with display: none. and when I click again the first list element I wish everything to close back. or alternatively to close with a timeout. so far I got to this:
$(document).ready(function(){
$("#gioca").click(function(){
$("#gioca").animate({ left: "+=400" }, 1200)
[code].....
I am having trouble accessing both the Class and the current element. How can I have access to both the current element and the Class?
// Class stuff above
fuction1 : function () {
myelements.addEvent('click', this.function2);
[code]....
I have found this nice background rotator:
Code:
<style>
body
{
/*Remove below line to make bgimage NOT fixed*/
background-color:black;
background-attachment:fixed;
background-repeat: no-repeat;
[Code]...
when i run it, i have to wait the 9000 timer to c the first image, and i need the page to start with an image and then start the rotation, i have assigned background-image by css, and tried also to use document.body.background, but when i do this the rotator doesnt work.
I'm having a little trouble with 2 differentJS scripts. I have a drop down slide menu and a parralex slide gallery. Both work on separate pages and puton the same page they still work however the submenu of the slide down menu does not. if I remove the style sheet that belongs to the gallery
Then the munu works, however (obviously) the page layout goes wrong. if i remove<h1 class="title">Alex Holland Perspective</h1> the menu works however page layout goes wrong andI loose my header
Here is the code.
I'm making a form with some fields. Once the form is submitted it updates the page with a new div containing the data entered without refreshing. Im using jquery form plugin. What I'd like to achieve is the new div(.record) to .slideDown. I guess I need to somehow specify the exact div by giving it an id or number. I'm not sure and why im here.
At the moment when i submit all of the divs(.record) are hidden with .hide, then they all slide down with .slide. Best i can understand is to hide the last div then slide down. But again.. I don't know how to specify to only slide down the last div added and not the current .record divs on the page.
[Code]...
I'm trying to manipulate the functions of Codaslider for a layout. What I need is the ability to use an image for slide dynamic slide navigation. I've solved the issue for dynamic hashing, however I'm stuck at modifying the HTML. I've tried a few things but I figure this is the easiest way...
[Code]....
I'm using jQuery cycle plugin right now, and I want to add a new slide based on the newly created image and I want to replace this slide later if the user has updated the image. I read the document of jQuery cycle, and I found it's using onBefore callback to do the job, but it's not on the fly, how could I do it on the fly?
View 2 Replies View RelatedHow to insert and remove slide in jquery cycle before the first slide.
View 3 Replies View RelatedI've seen websites that had large flash ads that covered content on pages that, after they had run, resized or disappeared.
We would like to use the technology behind that (presumably JavaScript) to show and hide an intro flash on a home page. We would like to have a "close" link on the flash also.
I have searched Google and here but haven't found any good resources and many of the sites I have seen using the technology are no longer using them. I just need a little assistance on the JavaScript part of the puzzle.
We want the flash to start over the copy on the page and then roll out softly when it's done playing, revealing the content below. Code:
I am very new to using jquery (and any javascript at all really) and I am having a dillema. I am trying to have several expandable sections of my webpage but I only want one to be opened at a time so I want to use slideUp and slideDown rather than slideToggle.
I want to use the same button to open and close the section. How do I do this? Here is my current jquery code, as of right now when I click expandButton1 the itemContent1 section closes and then reopens immediately:
[Code]...
It's for a navigation on my website. I want to have the sub-categories sliding down, if you click on a parent-category. I made it and there's no problem. But I want the sub-categories to slide away with a second click on the parent-category and I don't know how to do this.
to give you an example of my code:
the html:
<ul>
<li><a href="#">Home</a></li>
<li class="menuparent"><a class="menuparent2" href="#">Info</a>
[Code].....
I'm trying to get a mootools plugin to work with a slide in/slide out javascript using multiple divs. Here's the page: [url] The mootools code (Noobslide) slides a main image on the right when you click thumbnails on the left, which are wrapped in a thumb mask using CSS. The first row of thumbnails works perfectly, but when it's passed on to the next div the mask isn't passed on and the effect breaks down.
Here's the html:
The javascript:
The CSS:
Im a starting graphic designer, 21 yrs of age and just rolling into this webdesign industry. Ive come a long way, do have some knowledge.. but when it comes to complicated things like JS I often visit knowledgeable forums like these.
I hope I can contribute into making this community richer.
Now, Ive implemented this slide out menu succesfully before, only now it seems that ive mistaken somewhere. The menu just pops out instead of sliding out like it should.
Code:
<script type="text/javascript">
$(document).ready(function(){
var docked = 0;
$("#dock li ul").height($(window).height());
[Code]....
And if you want to see a working example of how it should be look here.
I am implementing the following example into a project I'm working on...Simple Slide PanelWhen clicking Slide Panel, the panel pushes everything down. How do you modify it so that instead of pushing everything down, it just slides down over the top of everything else?
View 4 Replies View RelatedI am trying to get a simple set of Javascript tabs to work properly. I have just two tabs and I want to set up the script to have the second tab automatically hidden prior to reading the javascript code because right now it shows the contents of both tabs when the page is loading and then the second tab disappears after all the script has loaded.
I have the jquery script linked to on the page and here is the way my script looks to run the tabs:
Code:
I want to add something like style="visibility:hidden;" to the DIV that isn't shown on page load and have it added and removed as necessary when users click on the tabs. So basically I would like the generated code to look like this:
Code:
Specifically, assume I have a div tag of absolute dimensions. I need
to figure out, first, whether or not the text inside the div tag is
partially hidden by the overflow setting, and if so, what the hidden
text is.
Is this even possible? Obviously, the rendering engine in the browser
"knows" this information, but is it accessible through Javascript?
I have a page using Moo Tools with 4 images. What I would like to do is to pass a boolean value to an array that exists outside of the image, but then I need to test to see if all elements outside the array are true. If so then I want to alert the user.
View 1 Replies View RelatedIt's a "live search" module for Joomla 1.5 and I'm trying to modify to use with Virtuemart (shopping cart component) I've got most of it to work but just can't figure how to extract the element I need. The script makes a url call to a search script which returns the formatted results. (works fine) The results are "set" in a hidden div. (works fine) They are in this format...
[Code]...