I have images that are resized if its width is bigger than container one. I can't find out a solution to select images that aren't 100% width. (Of course, I want to select them for jQuery actions.)
I currently have a website where i share thoughts with my friends (some kind of forum) and within this 'forum' people can post pictures they made but most of the time these pictures exceed the max width of my website so my website gets all streched out!So this is what i want: all images on the page must run thru some sort of function which checks if the image image width exceeds the max_width. if it does then the script must calculate how many pixels the current width exceeds the max_width and get this number so that the script does: current_width = current_width - (max_width - current_width)
let me try to explain better what I'm trying to do. I'm a real newbie I don't know much javascript but I understand more or less the logic behind it... tell me if this solution should work and if you know how to do it please show me. [URL]... I need to make div#photo's width to match the total width measurement of all the images it contains. If you load the page and you don't touch the size, it will work fine... but that's not realistic. If I resize the page, which will happen often on this kind of page (I'm assuming), the whole thing goes haywire (try it, scroll to the last image and resize the page you'll see what I mean). What can I do? Is my idea the right solution? Am I not explaining this clearly enough? Let me know please, I'm desperate. I've been trying to get CSS to do this for me for 3 hours now. Nothing works.
during the initial phase in the development of amuch more complex zomm&pan widget, i ended up with this tiny (yet another) zoom&pan plugin. Since it's small and with just few functionalities i'd call
I didn't see this as an option, so I decided to give it a try on my own. I was able to add some lines of code (shown with the > in the margin below) to the jquery.cycle.js script to read in the width of each image and center the slide within the slideshow container // set position and zIndex on all the slides
I want to preload some images for a webpage _and_ determing their width and height. The problem is that the scripts continue while the images are loaded in the background, while I need the thus undefined values of image.width and image.height. Thus I'm looking for a function which stops executing my script until the images are all fully loaded.
Some non-working sample code included. Notice this only doesn't work well on Firefox. The code runs without errors, but it doesn't get the correct height and width. To see the problem the images used shouldn't be in the browser cache. Code:
I would like to set up the section on the right that says "testimonials" to rotate between three quotes, with an image next to each quote. Is there a way to do this with a div block that does not have a set size?
I know I can use flash but that obviously would be a set width.
I have a number of SELECT drop downs, each in their own DIV. Each of these DIVs is in the same location but only one is visible at a time. I have two buttons on another DIV (previous and next) and want to position the buttons to the right of the SELECT group (based on the position and width of the longest SELECT). I do not know the position of the SELECTs until the page loads.
Here's the code:
Code: <html> <head> <style>
[Code]....
I'm debugging using firebug in firefox and everything works with getting the values I need - it just won't set the left attribute in the DIV.
I have 5 images on my page. What I want to do is, when ever I hover on one image, rest of the images have to become transparent. How to get this effect.
This is what I am using in the script.
$(document).ready(function () { $("#mainbuttons a img").hover(function () { $("#mainbuttons a img:not($(this))").css("opacity", ".5"), css("-ms-filter", "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)"), css("filter",
I just don't see any possibility to change the height of a button. I am developing an application to list many articles. The height of the collapsible buttons/select buttons is therefore to large, i want the buttons to be as small as possible.
Is there any way that one could have supersubs functionality applied to drop-down multi-column menus?I assume one would need to calculate the width of each column plus the combined width for the container.
[URL]If you go to that site on Firefox, the "Return Code #" expands. But if you use IE, you'll see that it doesn't.I could add a fix in there for the fields if they were static, but if you see my javascript, they are dynamically loading fields.
I am using a script I found on a jQuery board [URL] and it works for them, but not for me because my syntax is probably wrong. And they also are just using 1 field and not near-unlimited dynamically loading fields like I am.How would I add in a fix to have the browser 'only' use the expansion if the user is using IE6 or IE7?
[URL]...If you go to that site on Firefox, the "Return Code #" expands. But if you use IE, you'll see that it doesn't. I could add a fix in there for the fields if they were static, but if you see my javascript, they are dynamically loading fields. This "class":"wide" is not working:
I am using a script I found on a jQuery board [URL]..and it works for them, but not for me because my syntax is probably wrong. And they also are just using 1 field and not near-unlimited dynamically loading fields like I am. How would I add in a fix to have the browser 'only' use the expansion if the user is using IE6 or IE7?
I've recently start using Flexigrid (old JQuery grid plugin), and, as you may know, one of the few issue this really good grid plugin got is the lack of liquid layout option. My personal idea to solve the problem is to set the "width" parameter depending on $(window).width. Here is the problem (and here's why i post this question in "General use" and not in "Plugin").
The starting, and working, code is: $(document).ready(function(){ $("#flex1").flexigrid ( {
[Code].....
This work fine for me, but I supose it could be done way much elegant... maybe somethin without "IF" that could emulate the "%", like var percentage = $(#div.id).width()*0.XX with the 0.XX picked from an array of percentage, one for each column. Probably I should set up a function... ahhhh, as you may easily see I'm a total beginner with JQuery (and JS in general...)
Is the next jQuery code the best way to decrease an elements width?[code]I tried using the next code:[code]but that's not working, also not with '-20'.Maybe it's an idea to add this functionality? It's is already used in the .animate() function for changing the position of an element.
I've seen a variety of implementations around that enable selecting all or no checkboxes by using a checkbox to toggle that choice. However, I'm trying to find a way like this: I have two text links on my page: Select All, and Select None. How can I get those links to call a jquery function to select all or select no checkboxes in my form? As a little food for thought:
<head> $(function() { //function for selecting all or none...is there a way to make a single function that passes in a parameter to differentiate between selecting all or selecting none, or do I need a separate function for both?[code]....
New to Javascripting, new to forum. I searched the forum, and tried to adapt, to no avail. I am building a store and want users to be able to see how two items look together. I have it working, but it uses a drop down. I would like to display many items and have the user click on one "image", from the display of "top" images, to display it on top, and from another section of "bottom" images, click another image to display it on bottom. For instance to see what one plant would look like in different vases. [URL] If I could be picky, is there a way to make it all happen in the BODY of the page? I use DW and a template.
I need to create a page containing five image tags, two buttons, a <select> and a <textarea>. The images tags will each contain a picture of one of six possible outcomes for the dice portraying the numbers one through six..
The first button: When the user clicks on the button, all dice are rolled once. For each die when rolled, the src of its image tag is replaced with a random one of six possible pictures -- each picture being chosen with equal probability (1/6).... I HAVE THIS DONE
The select: The user may select any of the numbers one through six. Whenever a picture is clicked upon, then that die takes on the value shown inside the <select> THIS IS WHAT I NEED HELP WITH
The textarea: Results of the dice rolls should be kept as a running log (a cumulative history) in a textarea at the bottom of the page. With each roll (initiated by the click of the button), we should be able to see the complete history of all current and previous dice rolls. You need not consider changes brought about clicks on individual dice in conjunction with the <select>....I HAVE THIS DONE
The second button: A button below the textarea, should allow the user to obtain a report (overwriting the current contents of the log in the textarea) which tabulates the frequency of each of the six outcomes plotted separately for each of the dice. The frequency tabulation should show how often each die was rolled, as consistent with the data stored in the log..
I am trying to setup a javascript function that sets a div's width based on the combined width of the li's with the name "navItem". The problems I have been running into when trying to define the width of the li's is that they do not have a width defined in css. Can anyone help me out with this? The javascript function setWindow is suppose to show the div loginWindow and set the width of it.