The right most images are supposed to be visable and flip into view as the user scrolls. In IE, it's truncated and shoved over to the left. As you can see from the screenshot I attached, everything works fine in Moz.I think this is the suspect bit of js:
//move out the images on the right, then delete the right most one
var end = old + 4;
if(end > this.getListLength()) end = this.getListLength();
[code]....
I have a question here. I have 2 videos and if I click the image which uses #usemap, it will switch to the specific videos I clicked. FF and chrome has no problem but only IE.
The scenario is like this: Actual scenario is when the page load, it will display tab 1, video 1 and tab 2 is greyed out. If I clicked on tab 2, tab 1 is greyed out and video 2 is display. Both tabs I use #usemap.
But now the problem in IE is that it keeps on displaying tab 1 and video 2 instead of video 1 and when I clicked tab 2, tab 2 is selected but no video is loaded. Below is a simple code which hope it can helps better understanding of what I'm trying to do:
<div>
<img src="tab.jpg" id="tab1" #usemap="videotab">
<img src="tab.jpg" id="tab2" #usemap="videotab">
</div>
<div id="video1" style="display:block"><"1st video source codes here"></div>
<div id="video2" style="display:none"><"2nd video source codes here"></div>
[Code]...
IE just keep displaying video 2 when page load and video doesn't loads when tab 2 is clicked. Even if I program the 2 divs to be show, it only shows video 2 and video 1 is nowhere to be seen. And I tried taking out the video 2 codes, video 1 then can be seen.
I would like to create vertical coverflow using jquery like this link[URL]omponent-and-vertical-coverflow/
View 1 Replies View RelatedI am new to jQuery but I have managed to get the awesome anythingSlider to work on other sites but I can't work out why this isn't working here: [URL]. On FF, Chrome and Safari on Mac some of the images appear with incorrect text: The slider is set up like so:
<div class="anythingSlider">
<div class="wrapper">
<ul><li>
image a
text a
</li>
<li>
image b
text b
</li> etc...
</ul>
</div>
</div>
However, inFF, Chrome and Safari on Mac the image a appears with text b, image b appears with text c, etc. I have gone through the code and I can't see what's wrong.
When the left column first loads the vertical scrollbar displays correctly.
The vertical scrollbar is aligned up against the right border of the first column of the table which you can see by looking at the first image, and comparing it to the second.
Once I click on a folder in order to expand its contents, the vertical scrollbar introduces a gap of about 20 pixels as shown in the circle.
I looked at the css tag for the "classes" folder using firebug, and it showed {class ="directory collapsed", class= "directory expanded"} prior to and after expanding the contents of the folder.
I did a global regex search, within the project hierarchy, for (collapsed|expanded) and could not find any css that showed any margin-right for expanded, nor could I find any css at all related to "directory (collapsed|expanded)".
The only thing I found was that jqueryFileTree.js contained a function bindTree(t) with some code that toggled (collapsed|expanded):
Does anybody have a clue what is causing the gap once I click on a folder, and how to fix the problem?
Even if close the folder once the gap is there, I can't get rid of it unless I reload the page.
I am using the jQuery dialog window. Inside the modal window it is displayed a table. When I display the table in a standard HTML page everything works well but, when I display the table inside the dialog, special characters does not appear correctly (I mean the characters ‡·¡¨ " and so on).
View 1 Replies View RelatedI am creating a site whereby advertisers can create adverts. One of the options is to view a preview of their advert. I currently open a new window to display this preview page. I would prefer to keep the user within one window at all times to avoid confusion of multiple windows and therefore was wondering if there is a way to display this preview page as an overlay similar to how lightbox displays images? I am currently using jquery lightbox to display some images and also jquery for other elements of the site such as tabs.
View 1 Replies View RelatedI am seeking to change the color attribute in my CSS file under the ID's #realmaturesingles and #seniorpeoplemeet upon the hovering of these links. These two ID's are initialized inside an <a> tag (these are links). How can I do this with JavaScript? This is what I tried:
Code:
<script type="text/javascript">
$('#seniorpeoplemeet').FontEffect({
gradient:true,
mirror:true,
mirrorColor:"#CCC"
})
[Code]...
Im having a bit of trouble with the bounce show effect from jquery ui. To see what I mean, check out my development site. Anytime you modify a part in this computer builder, the rigth side gets updated. Right now its removing and adding list items. Problem is when click items too fast, the animation doesnt finish and the next item gets bumped lower and lower.
[Code]...
I am using scriptaculous effect in my script.
But it is giving following error.
Code:
It is giving Error Effect is not defined.
All other browsers work fine, but IE 9 flickers on the rotating gallery on this dev site..This is the JS function primarily responsible for it.
Code:
this.fadeRotate = function(currentItem,className,firstTime){
var moduleClass = document.getElementsByClassName(className);
var moduleItemCount = moduleClass.length;
if(moduleItemCount != 1){
[Code]...
To narrow it down more, it only seems to happen when you mouse in and out of certain divs.
I have a question, I'm developing my own LightBox with jQuery, and I call 2 function, animate and fadeIn and both of them work with the same element, fadeIn also with 2 elements more, but this isn't problem. And fadeIn I call before animate and here is the issue, it starts animate this element by fadeIn and after it is done, start function animate. But in second part, I call it again, and the element, which I animate in both of them, can't animate by fadeIn because he is visible, so immediately start function animate.
[Code]...
I am trying to test the id of three input boxes so that I can capitalize the first letter.
The fname and lname work fine but mi does nothing and I get no error is this because of the if statement or the fact that the mi only has one character?
I have some javascript code:
first it gets string of the url in the address bar
then it splits the string at the ? and grabs the right half
it then makes an IFrame go to that string(which is yet another url I would manually insert)
here is the code:
function redirect(){
var raw=window.document.location.href;
if(content_address_start=raw.indexOf("?")!=-1){
[Code]....
'content' is the id of the IFrame, and frame.html is the html file this code is inside.
Ok, so everything works perfectly when I test this code offline, but as soon as I load it to my website, and the .src line occurs, it just loads a blank page in the IFrame. What could be causing this? Perhaps certain sites will not allow themselves to be inside iframes? Much thanks in advance. I hope I gave enough information and relayed my problem clearly.
EDIT: It seems that the code works on other sites, just not youtube. Why would it do this and are there any ways around it?
IE, Chrome, and Safari all display this page correctly[url]...
here is what i mean by Firefox displays it incorrectly
in firefox:
1) type 'f' into the search field
2) you should move over to a youtube video
3) now click the Search tab at the bottom
4) you should notice the a portion of the video remains visable.
the site uses jquery for the slider.
I'm using the niceforms plugin to style my select box. The problem I'm having is that I can't get the right javascript code to activate the links placed in the value option.
el.lnk._onclick = el.onclick || function () {
if(this.ref.oldClassName == "NFOnChange") {
//insert your code here
}};
This is my attempt at manipulating the code to allow url linking in the select drop down
el.lnk._onclick = el.onclick || function () {
if(this.ref.oldClassName == "NFOnChange") {
//code i added
window.location.href = $(this.ref).val();
}};
The PROBLEM is the links do not work as expected, they do not link to their corresponding values.
form class ="niceform"
select class ="NFOnchange"
option value = "http://link1.com" -> link1.com
option value = "http://link2.com" -> link2.com
option value = "http://link3.com" -> link3.com
i just need to insert the right bit of code to make the links correspond to their option values.
I'm having problems getting my popup menu to work correctly. I have the following script:
[Code] .....
Been trying to work through a simple drag and drop interface using either IMG,
SPAN or DIV tags. That way I can define blocks of text and/or graphics as
draggable and be able to drop them on a similar (img, div, span, etc.) target,
preferably an image.
I can highlight text from an "<input type=text>" field and reach a target to
trigger an event (e.g. alert();), but can't get the same response when the
dragged item is a block of text or an graphic and drop it on either of the same
targets. Code:
I am opening a new window using window.open. I need the new window to
open on top of the parent everytime. I cannot use onBlur b/c the user
will need to click back to the parent for information. I just need it
to open on top everytime. I am using this line in the body
<body onload="window.focus()" bgColor="#0077d6"
ms_positioning="GridLayout">
The window.focus doesn't work everytime. I can open it and it may
work. I will completely close the app, start it again and it will not
work, but the next time it might. It is inconsistent. How do I get it
to not give focus back to the parent after it opens?
How can I get the parent to relinquish focus?
I got a pice of html that i want to transform to UI Tabs. This code is aouto generated and wrong, so I want to correct it before calling tabs() function
<div id="localtabs" class="list">
<ul>
<li id="tab1"><a href="#tone" title="Local Tab One"><span>Local Tab One</span></a></li>
[Code].....
My target is to move the divs currently inside the UL tags outside.
My thought was to select the divs with this statement:
var tabdivs = $('#'+options.id+' ul').children('div');
alert('tabdivs.length '+tabdivs.length);
This works fine in Firefox he told me tabdivs.length 2 but in IE6 i got an alert tabdivs.length 0 .
Why IE6 found no childrens?
I would like somebody to tell me wich is the correct way to add an element to another, and then give the added element a class ??
[Code]...
I have a function with the following code:
function saveRecord(){
$("#weekSheet tbody tr").each(function(){
$('td').each(function(i,o){
[code]....
$j('div.LeftNavArrowRt').parent().hover(
function() {
var selector = ".sub_" + $j(this).attr('id');
[code]....
I am using the "jQuery UI Multiselect" from [URL] I need to have it inside a <div> set with "display: none;" from the start. The user then clicks a link and the <div> tag opens op.
The problem is that whenever I open the box the Multiselect does not show up correctly, it shows up as a 3pixel wide stick. You can see an example at: [URL]
here is the eax.html code:
<link rel="stylesheet" href="css/common.css" type="text/css" />
<link type="text/css" rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/base/ui.all.css" />
[Code]....
Using 1.8.16 I have a problem whereby the secondary, hidden tabs do not display correctly - the content is all messed up. if I click on one of the messed-up tabs and reload the browser window, it displays ok, which signifies that the code responsible for building the tab content is fine... so the problem is with .tabs()
View 1 Replies View RelatedI've got this page with some simple numerical validation : [URL].. but when the number you enter into the input fields are 100 or over the validation fails.
View 1 Replies View Related