Adding Dynamic Rows To Table

Jul 23, 2005

I am working on some JavaScript that dynamically adds rows to a table
in response to a button click. A new row does appear on the screen
when the button is clicked. However, that table to which a row has
been added is itself contained within an outer table (to handle the
desired screen layout). That outer table does not properly grow to
contain the new size of the table to which the row was added. (More
specifically, I have sporadically seen the outer table grow correctly,
but then most of the time it does not grow as desired.) Is there
something that needs to be done in the code that will make the right
thing happen? (This phenomena appears in Netscape 7.1 -- things work
correctly under Internet Explorer 6.0)


A second anomoly concerns a button that appears in the newly added
row. An "onClick" event is associated with that dynamically added
button. The newly added button works correctly under Netscape 7.1 but
fails to work under Internet Explorer 6.0. (It is like Explorer will
not honor an event that is set in place by code that is dynamically
created after the page is loaded.) Shown below is an excerpt of the
code that is attempting to set up the desired button. Is there
something apecial that must be done in the code to get Explorer to
handle this properly (I have tried spelling things as both "onclick"
and also "onClick")?

tbldata = document.createElement("TD");
item = document.createElement("BUTTON");
v = 'doaction("Edit",' + n +')'
item.setAttribute("name","Edit");
item.setAttribute("onclick",v);
textitem = document.createTextNode("Edit");
item.appendChild(textitem);
tbldata.appendChild(item);

View 3 Replies


ADVERTISEMENT

Adding Table Rows - Putting In A Dropdown Box That Contains Numbers That Will Dynamically Show The Rows

May 1, 2009

i'm creating a ASP page, which is going to have a form in it that needs filling out. part of the form will be a table with a header row, then the next rows will have text boxes that need filling out. is there a way of putting in a dropdown box that contatins numbers that will dynamically show the rows. for example if i select 5, then five rows of text boxes will appear. if i select 14 then 14 appear.

View 3 Replies View Related

Dynamic HTML Table - Highlighting 3 Best Rows From The Table?

Jun 7, 2010

I have a dynamic HTML table which gets populated by coldfusion and displayed in the page, I have a column called performace which holds numeric values. I need to select the top 3 best performace value in the column and then highlight the entire row in different colours (top 3 values for performance). Can any one help me in doing it?My server can run only Javascript and coldfusion, No Ajax/PHP.I need a complete set of code which such that I will add the script and it performs the calculating and highlighting part.

View 1 Replies View Related

Adding Rows To Table

Sep 21, 2010

I have this fairly horrible table that I need to add rows to onclick. I can get it to do it easily enough by setting the tbody id to "tbodyid" and using this simple JS:

Code Javascript:
var rowcount = 0;
function addrow(){
rowcount++;
document.getElementById("tbodyid").innerHTML += '<tr>...</tr>';
}

Works beautifully, but the problem that I've got is that if I put any text in any inputs in the new rows, when I add an extra field they all blank themselves again, which is a bit annoying.

View 3 Replies View Related

Dynamic Table Sum Of Rows?

Sep 23, 2009

I have just took from internet dinamic table. this table is dynamic and its rows dynamically can be increased. it sum but not like integer for ex. in row1 i enter 20 and in row2 i enter 5 it sums like 205 but i need it sums like 25

[Code]...

View 4 Replies View Related

Adding Multiple Rows To A Table At One Go.

Sep 5, 2006

Is it possible to do so?

View 2 Replies View Related

JQuery :: Adding New Table Rows On The Fly?

May 15, 2009

Do you know if you can clone() and then appendTo() a <tr>. [URL]. I want to something like:
$("#second").clone().appendTo('#second');
It works, but it doesn't render like I want it to. I want it to be a NEW row.

View 1 Replies View Related

Dynamically Adding Rows To A Table?

Mar 22, 2010

i am having a table with some rows, which are shown under some categories. how can i dynamically add some rows to the table. there is a '>>' symbol infront of each category names. when i click on that symbol, i want to enlarge this category by adding more no of rows under this. And the symbol must turn to '<<'. when click on this, the reverse thing, ie, remove some rows and shows the initial rows.

View 1 Replies View Related

Re-numbering Rows In Dynamic Table?

May 17, 2011

I have a temp HTML file that is based the code I found on this site at [URL]. It dynamically adds and removes rows from an HTML table with inputs in the cells. I have tweaked my copy a bit to match our needs. Of importance to this post is that column 1 is simply the row number. Unfortunately, I am unable to figure out how to re-sequence the first column if a row is deleted. For example, if there are 4 rows, and I delete row 3, I need to re-sequence (re-number) the values to reflect 1, 2, 3, not 1, 2, 4.

[URL]

Below is the insert logic (which adds a delete button for the row).

function insertRow() {
nForm = document.forms[0];
nForm['submit'].disabled = false;
nTable = document.getElementById('worksheet');

[Code]....

View 7 Replies View Related

JQuery :: Adding And Removing Rows From Table

Oct 16, 2010

I'm building an application where the user can add Questions. For each Question they can add x answers or remove them (see screenshot). I can add questions and add/remove answers, For each question that is added I update the 'gameQuestions' variable with 1; The same goes for answers that I add: for each added answer I update the 'counter' variable with 1. When I remove an answer, the app. doesn't know how many answers each question has, it simply decreases the "counter" variable. So when I remove the 2nd question, it doesn't know how many answers that 2nd question has! How can I store the number of answers per question and how do I remove them correctly?

Here's my code so far:
$(document).ready(function(){
var gameQuestions = 1;
var counter = 1;
// Add a New Question...
$(".addQuestion").click(function() {
var question = "<table id='questionSet"+gameQuestions+"' class='form-table' style='background-color:#cccccc; width=100%;'>"; .....

View 1 Replies View Related

JQuery :: Counting And Adding Rows In Table

Feb 22, 2011

Is it possible for jQuery to count the number of rows in a table and then add some more if there is less than a defined amount? So that this table with less than 10 rows.....
<table class="testTable">
<tr>
<td>Foo...</td><td>Foo...</td><td>Foo...</td>
</tr>
</table>

Becomes this...
<table class="testTable">
<tr><td>Foo...</td><td>Foo...</td><td>Foo...</td>
</tr><!--added by jQuery -->
<tr><td>...bar</td><td>...bar</td><td>...bar</td>
</tr><tr>
<td>...bar</td><td>...bar</td><td>...bar</td> .....

View 3 Replies View Related

Hiding Multiple Rows In A Dynamic Table

Jul 20, 2005

I have a set of data that I display in a table. Each row has a category
and there may be a dozen or more rows in the same category. I'm looking
to add filter buttons to the page to hide/show categories on the fly.

Currently I can: Set the id on the tr to (category name) or to (category
name.data id).

Using the first, is there a way to hide all rows with that same id? It
seems currently to only hide the first row with that id.

If not, is there an easy way to find all rows whose id starts with
(category name)? I figure I could regex over every element in the page
looking for ones that begin with a particular id, but that would be
silly.

Also, is there a way to refer to every row of a table? I'd like to first
hide every row, then show those in the required category.

View 1 Replies View Related

Create Dynamic Rows In The Existing Table?

Jun 19, 2005

I'm trying to create dynamic rows in the existing table.

<html>
<head>
<script language="JavaScript">

[code]....

In the above code, i am able to create dynamic row only after the last row of the existing table. i.e( I am able to add rows after row2_column1 ,row2_column2).Hence on click of the "create new UPI" button only one row will be created.

Is it possible to create a new row after each existing row? (i.e. a new row after row1_column1,row1_column1 and a new row after row2_column1 ,row2_column2). What i exactly i need is to find the total number of the existing rows and on click of the button a new row should be created after each existing row.

View 3 Replies View Related

JQuery :: Cluetip IE8 Very Slow Adding To Table Rows

Apr 16, 2009

I've recently been using cluetip on a datable of about 400 rows. Recently I tested this against IE8 and found it very very slow. Doing simply the following:

$(document).ready(function() {
$(".user").each(function(i) {
$(this).cluetip();
}
});

Basically for each row in my table (400 rows) it would attach the cluetip to it. In IE8 it would freeze the browser for a good minute, if I pushed the compatibility mode button to run in IE7 mode it worked as xpected. In all other browsers it worked perfectly. Is there something different going on with IE8?

View 5 Replies View Related

Add/Remove Rows From Dynamic Table - Firefox Error

Nov 1, 2010

I use the below code to add or remove a row from a table using javascript. The code works fine on IE however it doesnt work on Firefox, can anybody suggest reasons why this might be doing so?

The id "table1" is the ID of the table I am trying to insert the innerhtml into.

function addRoom()
{
var row = document.all("table1").insertRow();
var column = row.insertCell();
column.innerHTML = "input type='text' name=txt1>";

[Code]....

View 1 Replies View Related

Dynamic Table (add, Remove Rows) That Works Across Modern Browsers

Jan 26, 2006

This is an example of what I currently have. There is also a button which adds more rows. It wasn't too hard to get it working using CSS and innerHTML:

<div id="main container">
<div id="row-1">
<input.....
</div>
<div id="row-2">
<input.....
</div>
etc

However, due to mass css headaches with the layout, I' like to see if it can be done it tables instead and using the DOM methods (nodes, createElement etc)

so far, the examples I've seen either don't allow the same functionality or don't work across IE5+(win), and modern versions of FFox, Safari and Netscape (MAC + WIN)

Does anyone know of a good class/example/tutorial?

View 1 Replies View Related

JQuery :: Data Table Creates Rows Dynamically - Buttons In Those Rows Do Not Fire The Onclick Event?

May 3, 2010

I have some JQuery that makes an Ajax call and then adds some rows to an existing table.

function
LoadDestinationTable() {
$("#destinationTable tr:gt(0)"[code]...

The problem is that the only place where the click event fires is on the rows that were added when the page was 1st rendered – the th, for example.I also tried adding an onclick event handler to the input button’s creation – that also does not fire.

View 1 Replies View Related

JQuery :: Selecting Table Rows In Cascading Table Structure?

Jun 6, 2011

I have a need to select all table rows in the outer table of a cascading table structure, that is a table with contained tables. I tried to use the "Context" section of jQuery, but the table rows of the sub tables are being selected as well.

View 1 Replies View Related

JQuery :: Stripe Table Rows After Table Is Reloaded

Feb 3, 2011

I have a site with 2 side by side tables with matching data. The left table is a drag-n-drop implementation so you can reorder the values in the database just by dragging and dropping. It works wonderfully. I want the right table to reflect the changes instantaneously. I got the right table to reload itself with the following jquery line:

$("#newMeet").load(location.href+" #newMeet>*","");

I stuck that line in the "Update" function of my "Sortable" funtion. And the line that I am using to initially stripe the right table is:

$(".checks2:even").addClass("grayBack");

Now matter where I stick that line, I cannot get the table re-striped after it reloads.

View 2 Replies View Related

Remove Table Rows From A Table Via Script By Index?

Feb 9, 2011

Can I use script to remove the 2nd and 3rd table row elements from this html?

Code:
<table id="dap_product_links_table">
<tr>
<td><span class="scriptheader">Product Title</span></td>[code].....

View 3 Replies View Related

Create Dynamic Rows

Jul 20, 2005

Can someone point me to a website where I can find a "create dynamic rows" javascript that work for IE, NS6 & NS7?

View 1 Replies View Related

Get Data From Dynamic Rows To PHP?

May 30, 2010

I wasn't sure if this should go in the JavaScript or PHP forum, so I decided JavaScript.

I have created a site that has a form where the user can create as many rows as wanted. I really have no idea how I can then get this information to use in PHP.

Here is my JavaScript function creating the rows code...

I read something about naming each element something such as 'el[]' and then iterating through it on the PHP side, but that didn't make much sense to me. I have only been using PHP for a few weeks now so I'm pretty new.

View 1 Replies View Related

Paging For Dynamic Rows

Sep 29, 2004

I AM IMPLEMENTING PAGING(NEXT AND PREVIOUS BUTTONS) FOR DYNAMIC ROWS
PER PAGE I AM DISPLAYING 3 RECORDS;

NO_of_pieces Method_Of_Pkg Actual_Wt
<< textbox(0,0) textbox(0,1) textbox(0,2) >>
<< textbox(1,0) textbox (1,1) textbox(1,2)
<< textbox(2,0) textbox (2,1) textbox(2,2)

Next Previous

I AM DOING THIS APPLICATION USING 2 DIMENSIONAL ARRAY;

I AM SETTING DATA IN SESSION WITH PAGE NUMBER IN SERVLET

I AM DISPLAYING SESSION DATA IN JSP LIKE THIS

String formData[][] = (String[][])session.getAttribute("myFormDataForPage"+pageNo);

MY PROBLEM IS I AM ENTERING DATA IN 3 ROWS after that CLICKING NEXT BUTTON AND GOING TO 2ND PAGE THEN IN THE 2ND PAGE I AM CLICKING PREVIOUS BUTTON TO SEE THE FIRST PAGE DATA ;I AM ABLE TO SEE THE 1ST PAGE DATA BUT I WANT TO DISPLAY DATA IN MY JSP PAGE I AM WRITING CONDITION LIKE THIS

If(formData != null)
IAM CALLING addRow('myTable') FUNCTION

I AM GETTING EXCEPTION PAGE NOT FOUND

why i am calling like this because

as u can see the addRow(id) function

for every dynamic row i am putting the remove button at the left side(user can have choice of deleting the row)

i want to call this Javascript function addRow() for satisfying IN both Add and Modify operations and also it will satisfy in Next and Previous modes; Code:

View 1 Replies View Related

Del Table Rows Or Vis/Invis Table.

Aug 16, 2004

What I am trying to accomplish is this, I have 4 radio buttons with something different on each. Now depending on what is selected, a table shows with maybe 10 items (its very random really, could be 5, could be 50, but probably more like 20 at most), anyways. I was thinking just delete all the rows, and just recreate the table... but now after thinking about it, just make the tables invisible, and visible depending on what is selected... which is suggested, and could anyone give me hints, or show me how I would be able to accomplish this?

View 2 Replies View Related

Adding Rows To A Form Dynamically

Feb 1, 2006

I've got this shopping cart style form where the user can add as many rows(items) as they need.

The last textfeild in each row is the price, which is added up and displayed in the total box at the bottom.

But it isnt working.

can anyone get it to work, anything can be changed i dont care as long as it works(in IE) ....

View 37 Replies View Related

Validate - Code - When Add Dynamic Rows

Sep 30, 2011

How to validate,when we add dynamic rows using javascript and for that rows we have to validate. I will send the code.

<html>

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved