MY PROBLEM IS I AM ENTERING DATA IN 3 ROWS after that CLICKING NEXT BUTTON AND GOING TO 2ND PAGE THEN IN THE 2ND PAGE I AM CLICKING PREVIOUS BUTTON TO SEE THE FIRST PAGE DATA ;I AM ABLE TO SEE THE 1ST PAGE DATA BUT I WANT TO DISPLAY DATA IN MY JSP PAGE I AM WRITING CONDITION LIKE THIS
If(formData != null)
IAM CALLING addRow('myTable') FUNCTION
I AM GETTING EXCEPTION PAGE NOT FOUND
why i am calling like this because
as u can see the addRow(id) function
for every dynamic row i am putting the remove button at the left side(user can have choice of deleting the row)
i want to call this Javascript function addRow() for satisfying IN both Add and Modify operations and also it will satisfy in Next and Previous modes; Code:
I have just took from internet dinamic table. this table is dynamic and its rows dynamically can be increased. it sum but not like integer for ex. in row1 i enter 20 and in row2 i enter 5 it sums like 205 but i need it sums like 25
I wasn't sure if this should go in the JavaScript or PHP forum, so I decided JavaScript.
I have created a site that has a form where the user can create as many rows as wanted. I really have no idea how I can then get this information to use in PHP.
Here is my JavaScript function creating the rows code...
I read something about naming each element something such as 'el[]' and then iterating through it on the PHP side, but that didn't make much sense to me. I have only been using PHP for a few weeks now so I'm pretty new.
I am working on some JavaScript that dynamically adds rows to a table in response to a button click. A new row does appear on the screen when the button is clicked. However, that table to which a row has been added is itself contained within an outer table (to handle the desired screen layout). That outer table does not properly grow to contain the new size of the table to which the row was added. (More specifically, I have sporadically seen the outer table grow correctly, but then most of the time it does not grow as desired.) Is there something that needs to be done in the code that will make the right thing happen? (This phenomena appears in Netscape 7.1 -- things work correctly under Internet Explorer 6.0)
A second anomoly concerns a button that appears in the newly added row. An "onClick" event is associated with that dynamically added button. The newly added button works correctly under Netscape 7.1 but fails to work under Internet Explorer 6.0. (It is like Explorer will not honor an event that is set in place by code that is dynamically created after the page is loaded.) Shown below is an excerpt of the code that is attempting to set up the desired button. Is there something apecial that must be done in the code to get Explorer to handle this properly (I have tried spelling things as both "onclick" and also "onClick")?
tbldata = document.createElement("TD"); item = document.createElement("BUTTON"); v = 'doaction("Edit",' + n +')' item.setAttribute("name","Edit"); item.setAttribute("onclick",v); textitem = document.createTextNode("Edit"); item.appendChild(textitem); tbldata.appendChild(item);
I have a temp HTML file that is based the code I found on this site at [URL]. It dynamically adds and removes rows from an HTML table with inputs in the cells. I have tweaked my copy a bit to match our needs. Of importance to this post is that column 1 is simply the row number. Unfortunately, I am unable to figure out how to re-sequence the first column if a row is deleted. For example, if there are 4 rows, and I delete row 3, I need to re-sequence (re-number) the values to reflect 1, 2, 3, not 1, 2, 4.
[URL]
Below is the insert logic (which adds a delete button for the row).
I have written code for adding and removing dynamic rows.i am using same file for both ADD and MODIFY operations.this page is working for ADD operation.lets say for MODIFY operation one employee has added 3 rows and i need to display those rowsand user can edit thoese rows and finally these values will be submitted to database.problem is coming in modifyRow() method.how to accomodate array values in the dynamic rows in modifyRow() method.Please review the code in that method?while loading the values the structure should be same as addRow() method?
this is dynamic rows code.when i click remove(-) any row i need to get respective checkbox id; for example when i delete row3 i need to get checkbox id as houseCheck3;when i delete row2 i need to get checkbox id as houseCheck2; once i get the id of that checkbox its easy for me to get the value;
I have a set of data that I display in a table. Each row has a category and there may be a dozen or more rows in the same category. I'm looking to add filter buttons to the page to hide/show categories on the fly.
Currently I can: Set the id on the tr to (category name) or to (category name.data id).
Using the first, is there a way to hide all rows with that same id? It seems currently to only hide the first row with that id.
If not, is there an easy way to find all rows whose id starts with (category name)? I figure I could regex over every element in the page looking for ones that begin with a particular id, but that would be silly.
Also, is there a way to refer to every row of a table? I'd like to first hide every row, then show those in the required category.
this is dynamic rows code.when i click remove(-) any row i need to get respective checkbox id;or example when i delete row3 i need to get checkbox id as houseCheck3;when i delete row2 i need to get checkbox id as houseCheck2;once i get the id of that checkbox its easy for me to get the value;
I'm trying to create dynamic rows in the existing table.
<html> <head> <script language="JavaScript">
[code]....
In the above code, i am able to create dynamic row only after the last row of the existing table. i.e( I am able to add rows after row2_column1 ,row2_column2).Hence on click of the "create new UPI" button only one row will be created.
Is it possible to create a new row after each existing row? (i.e. a new row after row1_column1,row1_column1 and a new row after row2_column1 ,row2_column2). What i exactly i need is to find the total number of the existing rows and on click of the button a new row should be created after each existing row.
I use the below code to add or remove a row from a table using javascript. The code works fine on IE however it doesnt work on Firefox, can anybody suggest reasons why this might be doing so?
The id "table1" is the ID of the table I am trying to insert the innerhtml into.
function addRoom() { var row = document.all("table1").insertRow(); var column = row.insertCell(); column.innerHTML = "input type='text' name=txt1>";
getting dynamic rows inputs to multiply 'onchange' of the value in the input in each row. It works in the first row inserted no matter what rowindex that row is moved to. All following rows only accept the initial input value and never change the 'cost' innerHTML of the colRow[i]. I figure I need a parentNode.parentNode syntax to make this function work in all rows.
Every thing is Client-side javascript and all rows are inserted to 'cartbody.insertRow[0]'. 'qtymultiply()' Function As is:
Code:
function qtymultiply(){ var cartitems=document.getElementsByClassName('itemrow'); var colRows=cartitems;
I'm trying to create a spreadsheet style form, where the column headers are set, but the number of editable data rows vary. The idea I have is to create a table and make its table cells editable via contentEditable='true', and use javascript to add more rows when a user clicks a button (id="addRows" -- see below).
Thus far I've put together the html for the static component of the table and I'm putting together the javascript. At this point I have a couple of questions:
1. Is there a better way to accomplish my goal? 2. How can I retrieve the data from the editable cells and group them so when I send the data via ajax, the information can be saved properly - i.e. grouped according to row?
This is an example of what I currently have. There is also a button which adds more rows. It wasn't too hard to get it working using CSS and innerHTML:
However, due to mass css headaches with the layout, I' like to see if it can be done it tables instead and using the DOM methods (nodes, createElement etc)
so far, the examples I've seen either don't allow the same functionality or don't work across IE5+(win), and modern versions of FFox, Safari and Netscape (MAC + WIN)
Does anyone know of a good class/example/tutorial?
I have a dynamic HTML table which gets populated by coldfusion and displayed in the page, I have a column called performace which holds numeric values. I need to select the top 3 best performace value in the column and then highlight the entire row in different colours (top 3 values for performance). Can any one help me in doing it?My server can run only Javascript and coldfusion, No Ajax/PHP.I need a complete set of code which such that I will add the script and it performs the calculating and highlighting part.
I have writting all of my paging logic in javascript. It works pretty fine. Basically, I have created a gridview with full paging in javascript. Now, given a certain need, I am being advised to do my paging on the server.
My question: is there a performance cost by doing all my paging server-side (and cost benefit by keeping it on the client). Or, does it matter?
my site is a flash site but it also has alot of javascript functions it utulizes as well. in IE my flash site runs fine but in FF i get some major lags...since flash is crossBroswer i figured it wasnt the flash file but the actual javasript so i viewd just the flash file form FF and it runs fine with no lag. so there is something in my page thats causing it to lag.
if you view my page vs just the .swf you will see the lag difference, so im sure its something in the javascript, but im unsure what is causing it...can anyone tell me what it is...or any ideas on what it could be?
i am doing a project and now i am try to work on paging, however i am stuck. I want to put in a list of links of website in the itemfilereadstore. So when show, i want to be able to click on any one of the link in the page, which will bring you to the selected website
The variable that stores the number of elements of the search results array is called contentLenght.Let's say that contentLenght equals 9. Then I need a div showing 6 elements an another sowing 3 elements.If contentLenght equals 7, I need a div showing 6 elements an another showing one element.If the value of contentLenght is 18, then I need three divs containing 6 elements each.. and so on.Now the paging itself: if I have just one div there's no need for paging, but if I have two of more I have to show the page's numbers.Then when a number is clicked the present div must hide and the div containing the elements for the page number should show.
I was about to paste some code but the only way I've come out with the six to six paging is with a long if else structure, and I'm sure there's a smarter way of doing it.
I'm using a .csv file as the basis for a spry dataset in Dreamweaver. I've got it working and the data is getting inserted into a table dynamically. Since there'll be quite a lot of rows in the table, I need some sort of paging controls so the user can see about 10 rows at a time and then page through the rest of the rows.[code]When I test though, I get the following error:"Failed to retrieve data set (dsHospPrivate) for spry:repeat".I wondered if someone could tell me where I'm going wrong? My javascript coding is really limited so I may have copied the wrong code blocks from the example in the abovementioned url.Also, I'm noticing that when the data comes in from the .csv file, any text that has an apostrophe in it, eg. children's - the apostrophe is not being rendered correctly in the browser, ie. it's being represented as a question mark in a triangle.
I'm working for a company that is using version 1.4.4. But Ive acquired the need to paging tabs.In the example though, It uses 1.3.2. Is this the only version of the library that i can use. or can I use my existing library?
