I am creating a single column fluid layout and have run into an issue when positioning the images I display via Mike Alsup's cycle plugin. I dynamically load a "content" DIV with three other DIVs, one of which is controlled by the cycle plugin. The other two DIVs are positioned as expected, however the DIV that cycle is handling has positioning CSS added to it inline that is pulling it out of my page flow. (When I disable the cycle code the single image I load first displays as expected.) Here is the code from that particular DIV:
I've seen several posts around this issue but nothing that seems like a definitive resolution.Cycle defaults to positioning the slides at top:0 and left:0 within the container div. I want them to be bottom:0 and left:0 within the container div.
I'm a bit new to jQuery but am loving it so far.. especially the cycle plugin. I have a strange problem that I've not been able to find the solution to anywhere else. Everything works just fine with the exception of one issue thats causing me problem. I'm using cycle to control 3 different fading animations on my page. On 2 of the animations I'd like to pause cycle after the image fades out for a few seconds but before cycle fades the next image in. The catch is that I want the timing to be different for each pause before the next cycle begins.
The goal is for#hpcontent,#hphead,#hpfade3to fade out all at the same time. Then for#hphead to pause for 2 seconds before it fades in the next random image, and#hpfade3to pause for 3 seconds before it fades in the next random image
I have yet to be able to do this successfully. I am using the Cycle Plugin to cycle through a series of images and corresponding caption. To show the images, I use:
Problem: The captions do not effectively cycle. What appears is the first caption from php the_excerpt but it does not change to the next php the_excerpt text. Can I solve this problem so I get the text from php the_excerpt to correspond to each image??
I have a few "panels" that I am looking to cycle. The panel has a width of 100% with a background image. It is supposed to span the whole width of the browser. the content is set at a specific width, centered in this panel. I am looking to cycle the background image and content but just can't get it to work (the panels have a set width and are pinned to the left, not centered.
I used the Jquery Cycle plugin on a site I'm working on.It worked fine on the static html site (see it in action here working as it should) but is leaving a gap between each image when I use it in Wordpress (See it here).
I am using the Cycle plugin for image slideshows, and I am working on one that also displays a title for each slide with a link. The issue is that the title swaps a little after the image swaps, so there is a delay. Here is my code:
- works as expected in that one photo fades into the next photo smoothly. Test page looks great - [url]
However, when I put the exact same code into Thesis/WordPress, I get a long delay between the images, and spend several seconds looking at a blank stage - [url]
Why would that be? How to make the images transition fade smoothly into the next image
I am having an issue with pausing the cycle from links within the cycle. I have set up a cycle that contains a html contentent including a 'video playlist'. This is a javascript based list that updates a flash video player with a new video inside the cycle. The videos are loading fine, but for some reason when i call the cycle 'pause', it dosent work? i have testing the $('#feature').cycle('pause'); from a link outside the cycle and that seems to be working, but it seems to be from the links inside the cycle content. here is the code i am using (i have made a custom crossfade transition)
function feature() { $('#featuretitle').hide(); $('#feature').after( '<div id="featurenav"></div>'
I'm using the Cycle plugin to display images for some of my past projects onhttp:[URL]..projekteMy problem is that in Chrome i get the above error in console.([cycle] terminating; zero elements found by selector) I have tried manually initializing the Cycle plugin for every project div and that did not help so I went back to my initial code:
I define a cycle in document.ready as per usual. In my cycle I have different sets of images that i want to cycle through and only want certain ones to cycle as selected using the slideExpr option.
Is there a way to change this option from:
SlideExpr: 'a'
To:
SlideExpr: 'b'
Another alternative i've considered is to make a cycle of cycles.
I've worked though a lot of issues trying to get the jQuery cycle plugin working in a relatively complex situation but have hit yet another wall.
Basically, I'm trying to get the jQuery Cycle plugin to cycle through entire divs, each one of which contains yet another slider platform built in jQuery. The first div always displays exactly as it should but when I click to transition, the elements within the second div appear stacked instead of side by side on the slider as they should. I've tried modifying the CSS in every way I can think of to prevent this, but so far, no dice.
I'm not sure whether its an element of the CSS for the second slider platform (wp e-commerce product slider) or one of the two platforms themselves. One thing I did notice was that one of the inner slider divs "gallery_slider" is automatically being set to 90px wide which is way too thin, but I can't seem to figure out how to override this if that is actually the problem.
You can check out the site that I'm trying to implement this on at [url]. The trigger to change the slider div is under "Men's">"Cloth Belts".
New to the forum. I have a problem with the Cycle plugin. Actually, it works great, but the paragraphs I am cycling aren't formatted according to my CSS. What am I doing wrong? View at [URL]..
I am new here and I seached vor problems with IE7 and JQuery Cycle Plugin but haven't found anything helpful for me. My problem: I almost copied the demo skript from [URL]...and changed it to my local folders using Dreamweaver (not laughing, I am not a professional programmer). In Dreamweaver live-view it works perfekt. So it does in Mozilla and Opera. But not in IE. There I can just see my 3 test-pictures beneath each other but no funktionality.
I am rather to JQuery, but love the possibilities. However I am finding my first experience rather vexing. The JQuery Cycle plugin works great in my site folder if I place it in a new file. But when I try to place it in my existing index page with existing CSS it displays the images on top of one another not in the div where they are placed. I can send a screenshot if that helps. I have also included my site folder with just the index page and all the files including graphics, scripts and CSS. Can any of you see where my conflict is?Also since then I added this css to the index file and got images to come together but transition does not happen:
I'm using the cycle plugin to crossfade a series of images that need to be transparent png files. I've got the png fix working, but in IE I can't get the images behind the first image to hide until called.
I've tried setting the display: none,-ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=0)", and filter: alpha(opacity=50), which works to hid them initially, but when they fade into 100% they disappear.
Of course this is only an IE issue, firefox and safari are fine.
I'm trying to load the Cycle plugin with a JSON feed from Picasa.Everything is pulling in from Picasa just fine. I can copy the exact HTML that it generates and paste it into my code and reload, and it works fine, but not when it is dynamically added via Javascript.URL...Here is my javascript code that pulls in the feed from Picasa and then initializes Cycle. I also automatically generate the thumbnails for the pager here too. Does Cycle read from the raw html rather than from generated html? [code]
I'm using th ejquery cycle to dispaly testimonials on a store page with an ssl connection. The problem is that when I call the script from [URL] I've tryed using the script directly on the page without calling it from the hithub slink, but no luck. how can the cycle plugin can be used without having the browser turn on the security warnings?
I am currently developing a site for a client which uses the JQuery cycle plugin to move through a number of divs which contain pictures and info about wedding dresses. All works fine in Firefox, but when I test in IE6 + IE7 the divs are all stacked on top of each other vertically and they soan right down the screen for 1000's of pixels. To me it seems like this is a problem with absolute/relative positioning or the z-index, I have also used a few floats in the child divs. I am also using SIFR for text replacement, could this be conflicting? Here is my code, can anyone see a problem that would cause my cycle not to work in IE.?
-------------- XHTML -------------- <code> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http:// www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
Does anyone have a link to an example where they are combining the excellent Cycle plug-in with a lightbox type modal display? I'd like to be able to present the slides in Cycle, then let the user click a slide to see the larger image in a lightbox (or similar) presentation.
i want to use the cycle plugin to replace the serialscroll plugin i'musing to do horizantal scroll? how would i do that? what would i haveto change in the css and options? i tried some different things butcan't get it to show more than one item at a time.
I'm having my first attempt as using JQuery (and working my way through my sitepoint books) and am a little stuck on the following.I am trying to put the cycle plugin into a web page (on my local machine using xampp) and whilst my 1st images appears it looks as though the actual plugin will no start.
I have two separate questions. One being, how would I go about having the container resizing itself for different image sizes. So that surrounding elements can conform to it's size?
Also, is there a way to align the images in a slide shows so that it is always horizontally and vertically centered in the slideshow?
I have a div wrapped around spans, and each span containing nothing but text (client testimonials)... I'm trying to get the spans to cycle through and it works wonders, except the Cycle plugin causes my spans not to be centered within the div.So I looked through the plugin source and noticed: $slides.css({position: 'absolute', top:0, left:0}).hide() I figured the absolute positioning was my problem and changed left:0 to left:50%and although it centers, the slide is broken and all my spansappear at once.
