If I run the site, both animations run at the same time. I would like to achieve, that the animation atBildLeiste0 runs first and after it is completed the animationtBildLeiste1should start.If this runs the way I want, I want to make the script flexible from 2 two 6 animations and finally generate it so that it runs in an infinite loop.This is one of the first jquery-codes
jQuery('div#primary').attr('width', '300'); I am manipulating html file. I am doing the above. But It is not updating the html file with the new width.
I have a text box where a user can press enter, tab (keypress) or click out of it (focusout) and an action happens. The box then gets removed. The problem is, the user presses enter, but that event is fired and then as the text box is removed the focus out is firing again.
How do I prevent removing the text box from firing the focusout action? I can remove the action totally but the text box could be returned to the document later.
I have a problem that suprisingly (not) only affects IE.
I have a hover/mouseover event when a users cursor enters a div, but because there is text inside my div IE is replaying the event if I hover in/out of the area that has text even though it is in the same div.
I've got the below function that works perfectly fine in FF, but it acts like nothing is happening in IE 8. I've tried the no cache option, my own url random addition and numerous variations.
I've been working on a multi-level drop down menu. It is already finished but while making it I encountered a problem that I'd like to find a solution for.
In the code, I clearly seperated the Model, View and Controller parts. The View part basically works with a single redraw-function. It clears the HTML of the complete drop-down menu and redraws it by recreating the needed DIV elements and adding them back to the webpage. The Controller part is a simple state machine that has transitions on onmouseover, onmouseout and onclick events.
In practice, when the mouse was moved over or out of some menuitem, the menu would be redrawn. The redraw function would first remove the complete menu from the HTML dom, and then re-insert the elements of the changed menu. Each of these elements contains a onmouseover and onmouseout argument.
The problem is as follows: in every redraw, when the menu is removed a onmouseout event is triggered, and when the menu is re-created a onmouseover event (in FFox). In IE, for some reason only a onmouseout event is triggered. This made my state machine think that the user actually moved the mouse pointer out of the menu element. Therefore the menu would go bananas and collapse!
The best way to solve this seems to simply ignore all of the user inputs during the redraw funtion for, say, 5 milliseconds during the redraw. However, in pratice, when the user moves the mouse very quickly the state machine 'misses' a mouseout event and the menu doesn't disappear as it should.
My question now is: does anybody know a neat way to prevent these 'ghost' events from happening while rebuilding the page, without interfering with the 'real' events?
I'm trying to echo a php variable to my javascript function but nothing is happening.Basically this php page displays bunch of records with a radio button next to each record. So when the radio button is clicked it would open that record in a new window that is clicked.
I have set up a disclaimer page for our public access PCs at our Libraries which has the following function:
function breach() { alert("Proceeding beyond these Conditions is..................... If you have read the Conditions, scroll to the bottom and press the 'Yes I
agree' button.") window.location="disclaim.htm"
and then in the body tag I have onunload=breach() This works fine for all websites entered into the address bar except if
you enter www.google.com
What it is supposed to do is bring up the prompt and when you click on the OK button it will go back to the disclaimer page. They should only be able to get to the web by clicking on the 'Yes I agree' button at the bottom of the disclaimer page. Does anyone out there know why google doesn't fire up the disclaim.htm page like all the other sites? It is very frustrating.
I'm writing an application with PHP that let me have statitics about visited pages for my web site. to save informations needed i use an ajax query with the unload event. The problem that i have is titme to time the script uses with that ajax query doesn't work especially when i stay long time in a page.
This is my code?
Why it works most of time but sometime doesn t work? is there any specifications to take for the unload event ?
1. Make ajax request (via getHTTPObject(), no libraries is used)
2. Create an iframe with script, src is "blank.html".
3. use iframe.document.write() to execute scripts (inkluding document.write based scripts) in the iframe.
4. call parent window's document to clone the iframe content.
5. Append the content clone to parent body.
Works like a charm in all browsers but IE, where every version - including IE9 beta - hangs on iframeWindow.document.close() with empty cache, leaving the window/tab unresponsible. When I force quit, restart and load the page again (now in cache) it works.What I've tried already:
* Googled.
* called the ajax request callback manually with string instead of request.responseText - it works even with empty cache here.Removed document.close() - resulting in scripts in iframe not executing at all (again, only with empty cache, cached pages works fine).
* Tested to make the ajax request synchronous - no difference.
Console.log trace:
Code: append() begin unlimited-scroll.js:160 install() begin unlimited-scroll.js:194 iframe begin[code].....
I do pretty much all the computer related tasks, which includes computer system repair, audio/video editing, cd/dvd printing and duplication, document format and creation, etc etc. But when it comes to HTML (or other codes) I know very little. But we needed a website, so I use Homestead hosting and the Homestead (offline) Site Builder program.
Anyway, inside the sight builder program, they have the option to insert HTML Snippets. Which I use for various objects, off site tools, and other. But now I need to do something for which I have not been able to find a "premade" html code object, that can perform the task desired. I have searched and searched google and went through many sites, including this one. I have tried to take some codes which I thought I could alter to make it perform, but they just wouldn't work for what I needed them to do.
I need a code that will automate a "specific text message" to change daily, and to schedule a "different specific text message" to appear each day. I need to be able to schedule each days "texts" at the very least 31 days in advance. In other words, I need to make an array (I think that's what it is called) for the entire month:
Day 1 "today's text 1" Day 2 "today's text 2" Day 3 "today's text 3"
[code]....
If were possible to make an "array" that would go six months out (or more) that would be very helpful! But the longest that I have seen is one month at a time, so that may be as long as they go, but I'm not sure.On top of all of this, I need these changes to be performed at a specific time of the day. I would like them to be preformed at sunset everyday, but I don't think there is anyway to direct the code to look at like [URL] sunset times or such. So if I can at least choose a specific hour, like 8:00 pm, that will work, I will just have to adjust this every once in a while.
However, I don't want it to change just at 8:00pm in my timezone. I need it to change at 8:00pm according to the website viewers timezone. Is there a way to make the code "look" at the users computer and "get their time" and use that to adjust what text is displayed? In other words, I live in Indiana USA. If someone in Australia looked up the webpage on the 15th day of the month, but it was 9:00pm Their Time. The text I need to be displayed should be for "Day 16" from the array.
I'd like some direction on creating a small piece of Javascript that will populate my <select> boxes.Basically, I have a form for users to create events, with a start time and an end time. (These are the two select boxes).For example:
1) Have times populated in 15 minute incrementals from 12:00AM to 11:45PM
2) Have some type of "error checking" available to where the End Time must be after the start time. It would be nice for the script to automatically change the end time field to a time that is after the start time.
I am trying to check the user enter time with current system. If user enter the time less than the current system time then I want to display the alert box. But the code is not working. Here is the code
<html> <head> <title>test</title> <script type="text/javascript"> var d = new Date(); var curr_hour = d.getHours(); var curr_min = d.getMinutes(); [Code].....
I do have the countdown script (see link below) to display the time between current time and the date given in real-time. However, I want to achieve to display the time difference between a given start and end time. Right now, it calculates from the current server time to the end time. I want to be able to set up my own start time and end time.
I have scoured the net and found nearly what I'm looking for, but not exactly, and I don't really know javascript, so trying to piece together bits of code hasn't worked. What I need is the script for a live clock with date and time format exactly as follows: Sunday, 07 June 2009, 24:00:00 (GMT+1).I have two separate files with the following code, which gets me close to what I need: Sun Jun 07 19:05:48 2009 Obviously the time is in the wrong place and it doesn't show GMT+1. These are the scripts:
Code: function update() { time = Date();[code]....
I need to convert a string containing the time to a real time value so I can insert it in to a time column in my database. tempElapsed = "1:22:33:44:555"
var _tempElapsedHours = tempElapsed.substring(2,4); var _tempElapsedMinutes = tempElapsed.substring(5,7); var _tempElapsedSeconds = tempElapsed.substring(8,10); var _elapsed = Date.parse(new Date(_tempElapsedHours,_tempElapsedMinutes,_tempElapsedSeconds));
The result of elapsed is -1.4243e+012, I was hoping for a time value of 22:33:44
I'm not really a Java writer, so I don't know how to do this myself, though I imagine it would be pretty simple. I am looking to add a script to a webpage that allows users to input a time manually, and have it converted to GMT/Zulu time and display the converted time. I have seen a lot of time zone conversion scripts online, but they all just convert whatever the current system time is to another time zone. I am looking for a script that allows users to convert a time and show the zulu time, for times other than the current time. The time zone the inputed local time would be in is +4:30 (Kabul). I don't really care about style or aestehtics, just a simple script I can insert into a web page to have a time input field. The converted output time can appear in another field, a popup bubble, etc, again style isn't really an issue. It's really just to help people in my job who need to know what the GMT/Zulu time was for certain local times after the fact. One would think it shouldn't be that hard to just subtract 4:30 in your head, but apparently it is.
There are probably a million threads about time conversion, but I cannot find the answer to my problem. So I'm making it a million and one...
I have my date/time stamps stored in UTC (ie number of second since the Unix Epoch). How do I convert this to a definable local time in JavaScript? With definable I mean any local time, not necessarily the machine local time.
In PHP I would do it as follows:
Code: $utc = time(); // current UTC $timezone = "America/New_York"; date_default_timezone_set($timezone); echo date("Y-m-d H:i:s", $utc);
The above would give the current date/time in New York. I would like to be able to do this in JavaScript for any time given in UTC.
how to get the time and date difference? given two time and date with the following format like in textbox A: 2011-05-03 17:35:47.0 and textbox B: 2011-05-03 16:35:47.0 then the output would be: 0 days, 1 hour, 0 minutes, 0 seconds
i am now playing with the time. how to make the time move in downwards, i mean a countdown like format, e.g the time will start countdown and end in 2 days? here's my initial noob code for creating time
I'm using a javascript-based countdown timer that currently uses the client's system time to calculate the countdown. I assume that this line of code is where this is performed:
Code:
I'm trying to make the script use server time instead as some people may have wrong dates/times set or live in different time zones etc.
So what I did was use a bit of php:
PHP Code:
This gives a result but now the countdown is 30 days off. I am testing on my local xampp server (which also uses system time) so there should be no discrepancy. I also tried adding
Code:
But no difference.
I can post the whole script if required but it is reasonably long.
I have a file system where users upload files. Using PHP the file is time stamped and that time stamp is saved in a database. This has been going on for months so I have a lot of files with server times saved in the database. Recently the client asked if the date/time could be displayed according to the client's timezone instead of the server's. So, I need a javascript function that will take a PHP formated date string and convert it to the clients time-zone.
So let's say there is a file with a date/time of 07/15/2004 1:15 PM in central time zone and the client is viewing the file today in pacific time zone (2 hrs diff.). I need to show that date/time as 07/15/2004 11:15 AM. I need JS to take གྷ/15/2004 1:15 PM' and somehow convert it to གྷ/15/2004 11:15 AM'. Code:
I recently found the Image clock code, and I am loving it! But, I would like it to only display pacific time, not retrieve the time from a users browser.
Here's my code:
<script type="text/javascript"> /*********************************************** * JavaScript Image Clock- by JavaScript Kit (www.javascriptkit.com) * This notice must stay intact for usage
I have a date in my javascript like this: Mon Dec 12 00:00:00 UTC+0430 2011 I need to convert it to a date without the offset (the +0430). I actually changed my computer's timezone to generate this offset - we have uses placing orders on our site who don't use UTC and it's throwing our orders out as they need to select a delivery date but it's passing the date with the offset. How do I convert a date to UTC time?
